Water Status Changes During Development in Relation to the Germination and Desiccation Tolerance of Aesculus hippocastanum L. Seeds

Seed growth characteristics of Aesculus hippocastanum were examinedin detail during development from about 70 to 140 d after anthesis(DAA), mainly in 1988 and 1989. Mean fresh and dry weights increasedfor both the axis and the whole seed up to the time of peakseed fall at 135 DAA with no cessation before fruit abscission.Water per seed increased up to 100 DAA, after which no furtherincrease occurred; moisture content declined for the embryonicaxis and whole seed respectively from above 75 and 65% at 95DAA to 65 and 50% at 130 DAA. At fruit shedding in 1990 waterpotential values of -1·2, -2·6 and -1·1MPa were observed for the testa, cotyledon and axis tissuesrespectively; relevant sorption isotherms are presented. Decreases in seed moisture content during development were accompaniedby increases in desiccation tolerance and in germinability,both reaching their maximum at the time of peak seed fall. Atmaturity, only about 10% viability was retained on drying seedto 20% moisture content; it is confirmed that the seeds are'recalcitrant'. The exact relationship between moisture contentand germination during development was dependent on the deptof dormancy, as judged by the period of chilling required; eachduration of chilling at 2°C within the range 3-12 weeksyields a curve of sigmoid shape. No germination occurred at26°C without chilling, but nearly full germination can beobserved for samples collected at 6 weeks before maximum seedfall with 12 weeks chilling. The rate of moisture loss duringdesiccation at 15°C and 15% rh becomes reduced during development.The ontogeny of these 'recalcitrant' seeds is compared withthat of 'orthodox' seeded species and the implication of sigmoid-shapedcurves for the relationship between seed moisture content andgermination are considered.Copyright 1993, 1999 Academic Press Aesculus hippocastanum L., horse chestnut, seed development, water status, germination, desiccation intolerance, desiccation rate