Prey detection in antlions: propagation of vibrational signals deep into the sand

Trap‐building antlion larvae detect their prey according to the substrate vibrations produced during movement of the prey on the sand surface. Although most studies are devoted to surface vibrational waves, in the present study, we determine the role of vibrations travelling through deeper sand layers. A behavioural experiment confirms that vibrational stimuli from prey insects on the surface of the sand stimulate the antlions buried in deeper sand layers to move towards the surface. Sand depth and particle size both have a strong effect on signal transmission. The damping coefficient (α₁₀) varies from 0.49 dB to 3.30 dB cm^?1 and depends on frequency (in the range from 100 to 300 Hz), particle size (from finest to coarse sand) and distance from the source of the vibrations. The deeper the sand, the narrower the frequency range of the signal becomes. Sand is a filter for higher frequencies. The smaller the sand particles, the more intense the filtering becomes. Fine sand with a mean sand particle size of 360 μm is a more efficient filter than coarse sand; consequently, high frequencies (> 2.5 kHz) are eliminated at a depth of 3 cm. Mean frequency depends on both depth and particle size. However, low frequency signals still propagate at a certain distance, which is biologically important in prey detection. Although the most efficient signal propagation appears to occur in coarse sand, it contains overly large particles that are inconvenient for relatively small antlion larvae. Predators seek a compromise between fine and coarse sand choosing medium sand.