Methylene Violet (Bernthsen), by Zinc-Alkali-Chlorate Hydrolysis of Methylene Blue

Though Bernthsen's methylene violet (MV) is a common constituent of polychrome methylene blue, the hydrolytic oxydation of methylene blue to yield azure-free MV has been considered a difficult chemical reaction since the time of Bernthsen, who used Ag₂O in the hydrolysis. MV is qualitatively distinguished from azures by Bernthsen's criteria and the author's new tests: (1) light-excited isomeric change, (2) reactivity to acidity, (3) reaction with KCIO, and (4) reaction with Na₂SO₃ of azures in CHCI₃, while MV gives none. But MV shows (5) indicator properties at pH 4, while azures do not. For practical hydrolysis, treat methylene blue (10 parts by weight) and KCIO₃ (1 part) with 1-2 N NaOH to convert methylene blue to a mixture of MV and azures. Then dilute the solution, add a Zn salt and NaHCO₃ in excess of the amount needed to convert the NaOH to Na₂CO₃. Boil the solution gently for 1-2 hr. The end point of the reaction is found by pipetting a drop of reactant into 3% acetic acid in a test tube, adding CHC1₃ and extracting. The acetic layer should then be almost colorless while the CHC1₃ is colored intensely cherry red. After cooling, the precipitated dye is filtered and dried. This procedure gives good yields of a dye which meets the criteria given by Bernhsen. The peak of the absorption curve in solution, pH 4-11, is at 624 mμ (Bernthsen 625 mμ) and in acid solution, pH 0-4, 588 mμ (Biological Stains, 1953; 580 μ). The dye contains so little azures, that purification of the MV fraction obtained from the reaction mixture is unnecessary when it is used in the Wright-type Romanowsky stain. The remarkable staining effect of MV is its power to bring out red azurophil granules of monocytes and lymphocytes when used with eosinated thiazins in Wright's stain.