Examination of granuloma of revised cemented or cementless total hip arthroplasties using inductively coupled plasma atomic emission spectrometry (ICP-OES)]

INTRODUCTION: Aseptic loosening is the most common problem in total hip arthroplasty (THA). One main aspect is inflammatory reaction against wear particles of the prosthesis materials. Analysing failure mechanisms in THA analysis of the particles and their element distribution of revised granulomatous tissue is essential to improve materials used in THA. MATERIALS AND METHODS: 23 granulomas of revised THA due to aseptic loosening, 13 of which with metal on metal bearing (M/M), were analysed using inductively coupled plasma atomic emission spectrometry (ICP-OES). RESULTS: Elements Cr, Mn, Ni, Al, Cu, Zn, Cd, Ti, V, Zr, Nb and Fe could be detected. The maximum value of Cr was 23.88 ppb (parts per billion), Al 191.02 ppb, Ni 64.95 ppb and Zr 9.96 ppb. The highest value of Al could be found in cementless implants. The maximum value of the elements Cr and Ni could be detected in M/M. In cemented implants the highest value of Zr was found. DISCUSSION: The origin of Zr was the used bone cement in cemented THA. The elements Cr and Ni were significantly higher in M/M bearings. The highest value of Al was detected in granulomas of revised corund rough blasted cementless implants. The histopathologic findings of the revised M/M bearings have been published recently. Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-OES) could not show any differences of the alloying constituents in cases with or without allergic reactions. ICP-OES analysis seems to be not useful examination of histologic sections using SEM with cryotransfer unit.