The Gallocyanin-Chrome Alum Stain; Influence of Methods of Preparation on Its Activity and Separation of Active Staining Compound

A dye, which is probably a cationic chelate, has been separated from a gallocyanin-chrome alum staining solution and prepared in the dry form. This dye is apparently the major staining compound. To prepare the chelate or dye, dissolve 150 mg of gallocyanin and 15 gm of chrome alum in 100 ml of distilled water and boil for 10-20 min, cool, filter, wash the precipitate with sufficient distilled water to restore the volume of the filtrate to 100 ml, then add concentrated NH₄OH until the pH is raised to 8-8.5. Filter, with suction, through a medium porosity fritted glass funnel. Wash with 100-200 ml of anhydrous ethyl ether and air dry the precipitate. This ratio of chrome alum to gallocyanin and the 10-20 min boiling time are optimal for preparation of the staining solution, which may be used either for staining or for separation of the chelate in its dry form. From the dried chelate, the staining solution is prepared as a 3% solution in1 N H₂SO₄ and a staining time of 16-24 hr is required. No differentiation is needed; the stain is self-limiting.