Acidogenic fermentation of lactose

Cheese whey is the main component of waste streams from cheese manufacturing plants. Whey is a high biochemical oxygen demand (BOD) effluent that must be reduced before the streams are sent to the sewer. It is proposed in this article that the production of methane by anaerobic fermentation would be the best use of this stream, especially for small plants. Single-stage fermentation of lactose, the main component of whey, results in a very low pH and a stalled process. Two-phase fermentation will eliminate this problem. The acidogenic stage of fermentation has been studied at pH of between 4 and 6.5. The nature of the main products of the reaction have been found to be pH dependent. Below a pH of 4.5 a gas (CO(2) and H(2)) is produced along with ethanol, acetate, and butyrate. Above a pH of 4.5 no gas was produced, and the liquid products included less ethanol and butyrate and more acetate. A separate study on the conditions for gas formation showed that if the pH dropped for a short time below 4.5 gases were formed at all subsequent pH. This would indicate a change in population distribution due to the period at a low pH. By assuming that the desired products from the acidogenic stage were butyrate, acetate, and no gases, the optimum pH range was found to be between 6.0 and 6.5.