Heat transfer coefficients and two-phase dispersion properties in a stirred-tank fermentor

Experiments were performed in a pilot scale 0.30 m³ conventional stirred-tank fermentor using water, air/water, and air/K₂SO₄ solutions. Both single- and two-stage impeller systems were investigated. Overall and tank-side coefficients for heat transfer from a 0.012 m diameter coil were measured for a range of impeller speeds and superficial gas velocities. Power input, bubble size, and gas hold-up were also determined. An analysis of the experimental results indicates that previously published correlations for single-phase heat transfer in stirred tanks (of the type: Nu = C(Re)^α(Pr)^β) are not applicable for single- or multiimpeller gas/liquid systems. The introduction of air alters the mixing pattern significantly, affecting both average and local tank-side heat transfer coefficients. Power input and gas hold-up are suggested as the major correlating parameters for the determination of tank-side heat transfer coefficients.