| Abstract: | The advantages of being able to see protein zones in a gel during electrophoresis (and hence before staining) are pointed out, and a method is described which depends on local increments of refractive index in these zones. The use of local increments of refractive index in polyacrylamide gels for measuring protein concentrations in zones during electrophoresis is briefly considered; it is found that such increments are greater than would be expected from the amount of protein when sodium dodecyl sulphate is present. The enhancement depends on conditions and time of running. This makes quantitative estimates difficult, but the sensitivity of detection of protein zones by observations based on refractive-index changes is greatly increased by this property of sodium dodecyl sulphate. Methods are described for making optically uniform gels (both with uniform and with graded concentrations of polyacrylamide), necessary for observation of small changes in refractive index. A simple dark-field system of observation is described. Examples are given showing protein samples observed with the system during electrophoresis and compared with the same gel stained with Coomassie Blue after completion of the run. Under optimal conditions the optical method is comparable in sensitivity with staining. With the proteins of lower mol.wt. (approx. 15000), the optical method is not so sensitive, becoming less sensitive with longer running time. This loss of sensitivity is greatly decreased by using more concentrated polyacrylamide gels, and graded gels are therefore more suitable for optical observation than are uniform gels. The observation of protein zones during electrophoresis adds nothing to the time needed for making a stained gel and gives much information long before it can be obtained from the stained gel. |
