Mechanical properties of the lamprey spinal cord: Uniaxial loading and physiological strain

During spinal cord injury, nerves suffer a strain beyond their physiological limits which damages and disrupts their structure. Research has been done to measure the modulus of the spinal cord and surrounding tissue; however the relationship between strain and spinal cord fibers is still unclear. In this work, our objective is to measure the stress–strain response of the spinal cord in vivo and in vitro and model this response as a function of the number of fibers. We used the larvae lamprey (Petromyzon Marinus), a model for spinal cord regeneration and animal locomotion. We found that physiologically the spinal cord is pre-stressed to a longitudinal strain of 10% and this strain increases to 15% during swimming. Tensile measurements show that uniaxial, longitudinal loading is independent of the meninges. Stress values for uniaxial strains below 18%, are homogeneous through the length of the body. However, for higher uniaxial strains the Head section shows more resistance to longitudinal loading than the Tail. These data, together with the number of fibers obtained from histological sections were used in a composite-material model to obtain the properties of the spinal cord fibers (2.4 MPa) and matrix (0.017 MPa) to uniaxial longitudinal loading. This model allowed us to approximate the percentage of fibers in the spinal cord, establishing a relationship between uniaxial longitudinal strains and spinal cord composition. We showed that there is a proportional relationship between the number of fibers and the properties of the spinal cord at large uniaxial strains.