Passive elastic properties of the rat aorta

The passive anisotropic elastic properties of rat's aorta were studied in vitro by subjecting cylindrical segments of thoracic and abdominal aorta to a wide range of deformations. Using data on pressure, axial stretch, outer diameter, axial force and wall thickness, incremental moduli of elasticity in the circumferential, axial and radial directions were computed. Results indicate that while the elastic behavior of the aortic wall is globally anisotropic, there exists a state of deformation at which the vessel displays incremental isotropy. This state of deformation corresponds approximately to the loading conditions to which the aorta is exposed in situ. Values of the moduli, analyzed as a function of transmural pressure, show that the stiffness of the aortic wall is fairly constant at low pressures but raises steeply for pressures higher than physiological. For axial stretches as occurring in situ, the magnitudes of the circumferential and radial moduli do not differ significantly for the thoracic aorta; hence this vessel can be regarded as transversely isotropic over a wide range of pressures. The same observation is valid also for the abdominal aorta when pressures equal or smaller than physiological are considered. For both the thoracic and abdominal segments of the aorta, the circumferential and radial moduli are smaller than the axial modulus at low pressures, while the reverse is true for large pressures.