Survival, horizontal distribution, and economics of releasing predatory mites (Acari: Phytoseiidae) using mechanical blowers

The predatory mites Phytoseiulus persimilis and Amblyseius cucumeris are commonly used in commercial greenhouses for augmentative biological control of spider mites and thrips, respectively. One disincentive for growers to use biological control is the cost of manually distributing predators. Therefore, we tested the efficiency of two types of mechanical blowers for dispensing predatory mites. One blower had a metering device to control the flow of material (MBWMD); the other had no metering device (MBWOMD). Predator survival was measured at various distances after dispensing them with blowers. Survival also was compared with a manual-sprinkling method. When blowers were held horizontally, the distribution of predators was uneven for both blowers. For P. persimilis, 77% were found at 1.52 and 2.44 m with the MBWOMD, whereas 75% were located at 2.44, 3.35, and 4.27 m with the MBWMD. For A. cucumeris, 97% were found at 1.52, 2.44, and 3.35 m with the MBWOMD, while 81% landed at 2.44 and 3.35 m with the MBWMD. Percentages of live P. persimilis found using the MBWMD, MBWOMD, and manual-sprinkling were 31 ± 4, 49 ± 3, and 68 ± 8%, respectively. For A. cucumeris, percentages of survival were 61 ± 4, 79 ± 4, and 83 ± 7%, respectively. The MBWOMD dispensed P. persimilis 22 and 44 times faster than the MBWMD and manual-sprinkling, respectively. Mechanical blowers have the advantage of better coverage, substantially less labor, and estimated total costs to growers that are approximately half that of the manual release method.