Organic reduction of tapioca wastewaters using modified RBC |
| |
Authors: | K. H. Radwan T. K. Ramanujam |
| |
Affiliation: | (1) Public Works Engineering Division, Faculty of Engineering, El-Mansoura University, El-Mansoura, Egypt;(2) Environmental Engineering Laboratory, Chemical Engineering Department, IIT, 600 036 Madras, India |
| |
Abstract: | A modified Rotating Biological Contactor (RBC) was used for the treatability studies of synthetic tapioca wastewaters. The RBC used was a four stage laboratory model and the discs were modified by attaching porous nechlon sheets to enhance biofilm area. Synthetic tapioca wastewaters were prepared with influent concentrations from 927 to 3600 mg/l of COD. Three hydraulic loads were used in the range of 0.03 to 0.09 m3·m–2·d–1 and the organic loads used were in the range of 28 to 306 g COD· m–2·d–1. The percentage COD removal were in the range from 97.4 to 68. RBC was operated at a rotating speed of 18 rpm which was found to be the optimal rotating speed. Biokinetic coefficients based on Kornegay and Hudson models were obtained using linear analysis. Also, a mathematical model was proposed using regression analysis.List of Symbols A m2 total surface area of discs - d m active depth of microbial film onany rotating disc - Ks mg ·l–1 saturation constant - P mg·m–2·–1 area capacity - Q l·d–1 hydraulic flow rate - q m3·m–2·d–1 hydraulic loading rate - S0 mg·l–1 influent substrate concentration - Se mg·l–1 effluent substrate concentration - w rpm rotational speed - V m3 volume of the reactor - Xf mg·l–1 active biomass per unit volume ofattached growth - Xs mg·l–1 active biomass per unit volume ofsuspended growth - X mg·l–1 active biomass per unit volume - Ys yield coefficient for attachedgrowth - YA yield coefficient for suspendedgrowth - Y yield coefficient, mass of biomass/mass of substrate removedGreek Symbols hr mean hydraulic detention time - (max)A d–1 maximum specific growth rate forattached growth - (max)s d–1 maximum specific growth rate forsuspended growth - max d–1 maximum specific growth rate - d–1 specific growth rate - v mg·l–1·hr–1 maximum volumetric substrateutilization rate coefficient |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|