| Abstract: | Mass transfer coefficients and interfacial areas were determined for the aeration of aqueous solutions in a turbine agitated vessel. The mass transfer coefficients measured for water without additive and for sodium chloride solutions matched very well to measurements in the literature for air bubbles of the same diameter in free rise. Thus the only effect of agitation was to determine the bubble size which then in turn set the coefficient. Two surface active agents were studied: sodium dodecyl sulfate and Dow Corning Antifoam C. The rate of mass transfer increased with the former additive but decreased with the latter; however, the mass transfer coefficient was the exact same function of bubble diameter in both cases and the different rates are attributed to the quite different effects on interfacial area. |
