Preliminary Biomechanical Study of Different Acetabular Reinforcement Devices for Acetabular Reconstruction |
| |
Authors: | Ching-Lung Tai Po-Yi Lee Pang-Hsing Hsieh |
| |
Institution: | 1. Graduate Institute of Medical Mechatronics, Department of Mechanical Engineering, Chang Gung University, Kweishan, Taoyuan, Taiwan.; 2. Department of Orthopedic Surgery, Chang Gung Memorial Hospital, Chang Gung University College of Medicine, Kweishan, Taoyuan, Taiwan.; Faculdade de Medicina Dentária, Universidade do Porto, PORTUGAL, |
| |
Abstract: | BackgroundAcetabular reinforcement devices (ARDs) are frequently used as load-sharing devices to allow allograft incorporation in revision hip arthroplasty with massive acetabular bone loss. The key to a successful reconstruction is robust fixation of the device to the host acetabulum. Interlocking fixation is expected to improve the initial stability of the postoperative construct. However, all commercially available ARDs are designed with non-locking fixation. This study investigates the efficacy of standard ARDs modified with locking screw mechanisms for improving stability in acetabular reconstruction.MethodsThree types of ARDs were examined to evaluate the postoperative compression and angular stability: i) standard commercial ARDs, ii) standard ARDs modified with monoaxial and iii) standard ARDs modified with polyaxial locking screw mechanisms. All ARDs were implanted into osteomized synthetic pelvis with pelvic discontinuity. Axial compression and torsion tests were then performed using a servohydraulic material testing machine that measured load (angle) versus displacement (torque). Initial stability was compared among the groups.ResultsEquipping ARDs with interlocking mechanisms effectively improved the initial stability at the device/bone interface compared to standard non-locked ARDs. In both compression and torsion experiments, the monoaxial interlocking construct demonstrated the highest construct stiffness (672.6 ± 84.1 N/mm in compression and 13.3 ± 1.0 N·m/degree in torsion), whereas the non-locked construct had the lowest construct stiffness (381.4 ± 117.2 N/mm in compression and 6.9 ± 2.1 N·m/degree in torsion) (P < 0.05).ConclusionsOur study demonstrates the potential benefit of adding a locking mechanism to an ARD. Polyaxial ARDs provide the surgeon with more flexibility in placing the screws at the cost of reduced mechanical performance. This in vitro study provides a preliminary evaluation of biomechanical performance for ARDs with or without interlocking mechanisms, actual clinical trial deserves to be further investigated in future studies. |
| |
Keywords: | |
|
|