Application of a Plasmonic Biosensor for Detection of Human Blood Groups

A recently published plasmonic biosensor based on birefringent solid-core microstructured optical fiber is applied for the detection of human blood groups. The birefringent behavior is obtained by removing five central air holes of a two-ring hexagonal lattice of holes in a gold-covered silica fiber with the blood layer surrounding the fiber. The sensing performance of two resonant modes (I based on a phase matching point and II based on a loss matching point) are analyzed. For an increase of the refractive index from 1.3768 (human blood group A) to 1.3796 (human blood group O), the resonance spectral width δλ _0.5 is decreased from 26.8 to 25.8 nm for the core mode I and δλ _0.5 is increased from 28.3 to 33.2 nm for the core mode II. In addition, the amplitude sensitivity S _A is increased from 329.7 to 372.2 RIU^?1 for the core mode I and S _A is decreased from 298.2 to 283.7 RIU^?1 for the core mode II. The average value (26.20 nm for core mode I and 31.07 nm for core mode II) of δλ _0.5 from the human blood groups A, B, and O for our plasmonic biosensor is smaller in comparison with a recently published average value (39.10 nm) of the full width at half maximum (FWHM). Our biosensor can be calibrated for a glycerol-water solution by using the linear dependence between the refractive index n _a and the mass fraction w of the solutes.