The retting of flax after preservation with sulphur dioxide

Experiments were carried out to compare the retting of moist flax preserved with sulphur dioxide with that of green dried flax, using whole straw samples. When retted in water at either a constant 20°C or 28°C dried flax was fully retted after 15 and 10 days respectively whereas the sulphur dioxide treated flax (20 g sulphur dioxide kg“¹ flax DM) had undergone almost no retting after 20 days at 20dC or 10 days at 28°C. Pre-soaking the treated flax for 24 h in water and changing the acidified water, raised the pH of the retting liquor to a more normal value but did not significantly increase the rate of retting. Addition of the pectinase enzyme preparation ‘Flaxzyme’ to retting liquor at the rate of either 1.5 g kg^-1 or 3.0 g kg^-1 water, and at a constant temperature of 20°C, substantially increased the rate of retting of both sulphur dioxide treated and dried flax. Optimum degree of retting was achieved at 24 h with the treated flax and at 97 h with the dried flax. Pre-rinsing of the sulphur dioxide treated straw only served to reduce the rate of retting. It was concluded that natural water retting of sulphur dioxide treated flax is retarded by the presence of acidic residues of sulphur dioxide, while enzyme retting is enhanced by these. In further smaller scale experiments using bundles of cut flax straw Flaxzyme was added at concentrations ranging from 0–8.0 ml litre ¹ to containers containing flax in water at ratios from 1:10 to 1: 600 flax:water and the producion of galacturonic acid was used as an indicator of retting progress. Retting took place more rapidly at higher flax to water ratios for a given enzyme concentration. This effect was attributed to the lower pH of higher flax to water ratios which created pH conditions closer to the pH optimum for the retting enzymes. When enzyme retting was compared at a range of buffered pH's the optimum was pH 4.0. At a buffered pH of 4.0 and a temperature of 19°C, retting of sulphur dioxide treated moist flax (flax to water ratio of 1:10) was achieved with Flaxzyme concentrations as low as 0.5 ml litre”‘,much lower than the previously reported minimum of 3.0 ml litre’.