A Versatile Stain for Pollen Fungi, Yeast and Bacteria

A versatile stain has been developed for demonstrating pollen, fungal hyphae and spores, bacteria and yeasts. The mixture is made by compounding in the following order: ethanol, 20 ml; 1% malachite green in 95% ethanol, 2 ml; distilled water, 50 ml; glycerol, 40 ml; acid fuchsin 1% in distilled water, 10 ml; phenol, 5 g and lactic acid, 1-6 ml. A solution has also been formulated to destain overstained pollen mounts. Ideally, aborted pollen grains are stained green and nonaborted ones crimson red. Fungal hyphae and spores take a bluish purple color and host tissues green. Fungi, bacteria and yeasts are stained purple to red. The concentration of lactic acid in the stain mixture plays an important role in the differential staining of pollen. For staining fungi, bacteria and yeasts, the stain has to be acidic, but its concentration is not critical except for bacteria. In the case of pollen, staining can be done in a drop of stain on a slide or in a few drops of stain in a vial. Pollen stained in the vial can be used immediately or stored for later use. Staining is hastened by lightly flaming the slides or by storing at 55±2 C for 24 hr. Bacteria and yeasts are fixed on the slide in the usual manner and then stained. The stock solution is durable, the staining mixture is very stable and the color of the mounted specimens does not fade on prolonged storage. Slides are semipermanent and it is not necessary to ring the coverslip provided 1-2 drops of stain are added if air bubbles appear below the coverslip. The use of differentially stained pollen mounts in image analyzers for automatic counting and recording of aborted and nonaborted pollen is also discussed.