Flat, Adherent, Well-Contrasted Semithin Plastic Sections for Light Microscopy

Semithin (0.5-2.0 μm) sections of plastic embedded specimens have long been used for identifying and orienting structures destined for electron microscopic observation. Improved staining methods and the development of more versatile plastics have increased the use of semithin plastic sections for histochemical and autoradiographic studies. The principal advantage of plastic over paraffin sections is the possibility of increased resolution. This advantage is often compromised, however, by problems arising during processing and staining. Wrinkles are common in sections containing tissues of different consistencies or when the hardness of the tissue does not match that of the surrounding plastic (Millonig 1980). Unfortunately, many of the methods designed to eliminate wrinkles (e.g., Alsop 1974, Sommer et al. 1979) require prolonged staining or repeated handling of the sections. Section adhesion problems usually arise during staining, particularly if the protocol requires alkaline or oxidizing reagents. Adhesives such as Mayer's albumen or chrome alum-gelatin (Hayat 1981) work well but may contribute to undesirable background staining or trapping of debris. A more complicated problem, inadequate stain contrast for photomicrography, usually can be traced to inability of the stain to penetrate the plastic, staining of the plastic, or nonspecific staining of the tissue. Alkaline staining solutions and chemicals which etch plastic can increase penetration, but may also cause section loss or staining of the plastic. The following is a simple method to eliminate these processing problems. It exploits the solvent properties and low surface tension of glycerol to aid in softening, flattening, and adhering semithin plastic sections to microscope slides.