Reject water treatment by improvement of whole cell anammox entrapment using polyvinyl alcohol/alginate gel

Reject water treatment performance was investigated by whole cell anammox sludge entrapped polyvinyl alcohol/sodium alginate gel in the stirred tank reactor (STR). The whole experiment was conducted through Phase 1 and Phase 2 in which synthetic wastewater and modified reject water were used as feeding medium, respectively. The anammox reactor demonstrated quick start-up after 22 days as well as stable and relatively high nitrogen removal rate of more than 8.0 kg-N m⁻³ day⁻¹ during the two both phases even under moderately low temperature of 25 ± 0.5°C during the last 2 months of Phase 2. The matured brownish red PVA beads had good characteristics with buoyant density of 1.10 g cm⁻³, settling velocity of 141 m h⁻¹ and diameter of 4 mm. The bacterial community was identified by 16S rDNA analysis revealing the concurrent existence of KSU-1 and new kind anammox bacterium Kumadai-I after changing influent from synthetic wastewater to reject water. It was speculated that Kumadai-I might play a role as “promotion” factor together with KSU-1 on high nitrogen removal rate. These results demonstrate the potential application of whole cell anammox entrapment by PVA/alginate gel for achieving stable and high-rate nitrogen removal from high ammonium with low C/N ratio contained wastewaters, such as reject water, digester liquor or landfill leachate.