Initial and Persisting Staining power of Solutions of Iron-Hematoxylin Lake

A study was made of factors affecting the initial staining power and the stability of iron-hematoxylin lake solutions. The findings were applied to the preparation of a superior hematoxylin staining solution. This is made up as follows: in 50 ml. water dissolve, in order, 1.0 g. ferric ammonium sulfate FeNE₄ (SO₄)₂⋅ 12H₂O], 0.8 ml. sulfuric acid, 50 ml. 95% ethyl alcohol, 0.5 g. hematoxylin. Filter the solution to remove the insoluble, white crust of the ferric ammonium sulfate. The solution stains well ten minutes after it has been made. Peak performance is attained within 5 hours, and is maintained for 4 to 8 weeks. Staining time is 3 to 30 minutes. Excess stain can be rinsed off the slide and section by immersion in water, after which destaining, if necessary, can be accomplished with a solution of 50 ml. water, 50 ml. 95% ethyl alcohol, 0.18 ml. sulfuric acid. The slides may or may not be placed next in a neutralizing solution of 50 ml. water, 50 ml. 95% ethyl alcohol, 0.5 g. sodium bicarbonate. They may then be passed through 50 ml. water, 50 ml. 95% ethyl alcohol on the way to alcoholic counterstaining solutions, or through water leading to aqueous counterstains.

The nuclear stain produced is black, intense and very sharp and has proved to be consistently excellent on a variety of animal and human tissues following a number of different fixatives.