Microstructure‐Controlled Ni‐Rich Cathode Material by Microscale Compositional Partition for Next‐Generation Electric Vehicles

A multicompositional particulate LiNi_0.9Co_0.05Mn_0.05]O₂ cathode in which LiNi_0.94Co_0.038Mn_0.022]O₂ at the particle center is encapsulated by a 1.5 µm thick concentration gradient (CG) shell with the outermost surface composition LiNi_0.841Co_0.077Mn_0.082]O₂ is synthesized using a differential coprecipitation process. The microscale compositional partitioning at the particle level combined with the radial texturing of the refined primary particles in the CG shell layer protracts the detrimental H2 → H3 phase transition, causing sharp changes in the unit cell dimensions. This protraction, confirmed by in situ X‐ray diffraction and transmission electron microscopy, allows effective dissipation of the internal strain generated upon the H2 → H3 phase transition, markedly improving cycling performance and thermochemical stability as compared to those of the conventional single‐composition LiNi_0.9Co_0.05Mn_0.05]O₂ cathodes. The compositionally partitioned cathode delivers a discharge capacity of 229 mAh g^?1 and exhibits capacity retention of 88% after 1000 cycles in a pouch‐type full cell (compared to 68% for the conventional cathode). Thus, the proposed cathode material provides an opportunity for the rational design and development of a wide range of multifunctional cathodes, especially for Ni‐rich LiNi_xCo_yMn_1‐x‐y]O₂ cathodes, by compositionally partitioning the cathode particles and thus optimizing the microstructural response to the internal strain produced in the deeply charged state.