Biomimetic Anti-Abrasion Surfaces of a Cone Form Component Against Soil |
| |
Authors: | Jin Tong Mohammad Almagzoub Mohammad Almobarak Yunhai Ma Wei Ye Sen Zheng |
| |
Institution: | 1. The Key Laboratory of Engineering Bionics (Ministry of Education, China), Jilin University, Changchun 130022, P. R. China;2. The College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, P. R. China;3. The College of Mechanical Science and Engineering, Jilin University, Changchun 130022, P. R. China |
| |
Abstract: | The geometrical surfaces of soil-burrowing animals were imitated and modeled on a cone component, the measuring tip part of a soil cone penetrometer. These biomimetic surfaces are concave dimples, convex domes and two wavy forms. The conventional cone surface and the biomimetic cone surfaces were analyzed in ANSYS 11.0 program to estimate cone equivalent stress and soil equivalent stress. Results show that biomimetic surfaces with the geometrical structures have lower cone equivalent stresses and soil equivalent stresses than that with conventional (smooth) surface. The least maximum cone equivalent stress and least maximum soil equivalent stress were recorded for biomimetic surfaces with concave dimples and wavy form-2 respectively. The two-body abrasive wear of biomimetic cone surfaces and conventional (smooth) cone surface were run on a rotary disk type of abrasive wear testing machine. The biomimetic cone surfaces were found to have lower abrasive wear than the conventional surface. It was found that and biomimetic cone surface with concave dimples has the lowest abrasive wear among the all tested surfaces. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|