Cloning of aroG, the gene coding for phospho-2-keto-3-deoxy-heptonate aldolase(phe), in Escherichia coli K-12, and subcloning of the aroG promoter and operator in a promoter-detecting plasmid

Defective transducing phages carrying aroG, the structural gene for phenylalanine (phe)-inhibitable phospho-2-keto-heptonate aldolase (EC 4.1.2.15; previously known as 3-deoxy-D-arabinoheptulosonate-7-phosphate synthetase[phe]), have been isolated, and DNA from two of these phages has been used to construct a restriction map of the region from att lambda to aroG. A 7.6-kb PstI-HindIII fragment from one of these phages was cloned into pBR322 and shown to contain aroG. The location of aroG within the 7.6 kb was established by subcloning and Tn3 transpositional mutagenesis. A fragment carrying the aroG promoter and operator has been cloned into a high copy number promoter-cloning vector (pMC489), and the resulting aroGpo-LacZ' (alpha) fusion subcloned in a low copy number vector. Strains with this fusion on the low copy number vector exhibit negative regulation of beta-galactosidase expression by both phenylalanine and tryptophan and positive regulation by tyrosine in a tyrR+ background.     

Carotenoid synthesis in Streptomyces setonii ISP5395 is induced by the gene crtS, whose product is similar to a sigma factor

In many species of actinomycetes, carotenogenesis can be photoinduced. The capacity to respond to photoinduction is, however unstable and, in various strains of Streptomyces, is lost at a relatively high frequency. In Streptomyces setonii ISP5395, which normally produces no carotenoids, carotenoid-producing mutants can be obtained following protoplast regeneration. We report here the characterization of a gene, crtS, which was isolated from one such mutant and can confer on wild-type S. setonii ISP5395 cells the capacity to synthesize carotenoids. Sequence analysis of crtS reveals an open reading frame, which shows homology to genes that encode alternative sigma factors in Bacillus subtilis. We propose that crtS encodes a sigma factor which is necessary for the expression of a cryptic gene(s) for carotenoid biosynthesis in S. setonii ISP5395.     

What Do We Know About Metal Recycling Rates?

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end‐of‐life recycling rates (EOL‐RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in‐use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low‐cost (which thereby keeps down the price of scrap), many EOL‐RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL‐RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors.     

Association between FABP2 Ala54Thr polymorphisms and type 2 diabetes mellitus risk: a HuGE Review and Meta‐Analysis

Many studies have examined the association between the FABP2 (rs1799883) Ala54Thr gene polymorphism and type 2 diabetes mellitus risk (T2DM) in various populations, but their results have been inconsistent. To assess this relationship more precisely, A HuGE review and meta‐analysis were performed. The PubMed and CNKI database was searched for case‐control studies published up to April 2014. Data were extracted and pooled odds ratios (OR) with 95% confidence intervals (CI) were calculated. Ultimately, 13 studies, comprising 2020 T2DM cases and 2910 controls were included. Overall, for the Thr carriers (Ala/Thr and Thr/Thr) versus the wild‐type homozygotes (Ala/Ala), the pooled OR was 1.18 (95% CI = 1.04–1.34, P = 0.062 for heterogeneity), for Thr/Thr versus Ala/Ala the pooled OR was 1.17 (95% CI = 1.05–1.41 P = 0.087 for heterogeneity). In the stratified analysis by ethnicity, the significantly risks were found among Asians but not Caucasians. This meta‐analysis suggests that the FABP2 (rs1799883) Ala54Thr polymorphisms are associated with increased susceptibility to T2DM risk among Asians but not Caucasians.     

Prediction of the halothane (Hal) genotypes of pigs by deducing Hal, Phi, Po2, Pgd haplotypes of parents and offspring: results from a large-scale practice in Swedish breeds

Results from a large-scale study, comprising 75 different breeding herds, are reported on predicting the halothane ( Hal ) genotypes of individual pigs by making use of the known close linkage between Hal and three C blood marker loci ( Phi, Po2, Pgd ). The parents haplotypes (involving Hal and marker loci) were determined from the HAL phenotypes (halothane test results) and marker loci phenotypes of their offspring in the first one or two litters studied. In subsequent litters of the Hal -marker loci haplotyped parents, the offspring's expected Hal genotypes could be predicted on the basis of the marker loci haplotypes inherited by them. By comparing the expected and observed HAL phenotypes of offspring in subsequent litters, the predicted Hal genotype was found to be correct in 90–95 % of the 4000 offspring (from Nn × Nn and Nn × nn matings) of Swedish Landrace and Yorkshire breeds studied.
The order of the three marker loci was confirmed as Phi-Po2-Pgd but the position of Hal with regards to Phi could not be resolved. The recombination frequencies between the most distant loci in this region, viz. Hal-Pgd and Phi-Pgd , were estimated to be 3–4.5 % and 4–6 % , respectively. The easy and rapid electrophoretic techniques described in the study to phenotype PHI, PO2, PGD, also allowed phe-notyping of six other polymorphic protein systems on the same gels. Thus Hal genotyping and effective parentage control can be conducted simultaneously.     

The RAINFOR database: monitoring forest biomass and dynamics

Problem: Data from over 100 permanent sample plots which have been studied for 10–20 years need a suitable system for storage which allows simple data manipulation and retrieval for analysis. Methods: A relational database linking tree records, taxonomic nomenclature and corresponding environmental data has been built in MS Access as part of the RAINFOR project. Conclusion: The database allows flexible and long‐term use of a large amount of data: more than 100 tree plots across Amazonia, incorporating over 80 000 records of individual trees and over 300 000 total records of tree diameter measurements from successive censuses. The database is designed to enable linkages to existing soil, floristic or plant‐trait databases. This database will be a useful tool for exploring the impact of environmental factors on forest structure and dynamics at local to continental scales, and long term changes in forest ecology. As an early example of its potential, we explore the impact of different methodological assumptions on estimates of tropical forest biomass and carbon storage.     

The large bat Helitron DNA transposase forms a compact monomeric assembly that buries and protects its covalently bound 5′-transposon end

1. Download : Download high-res image (250KB)
2. Download : Download full-size image

     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

PHENOTYPIC PLASTICITY INDUCED IN TRANSPLANT EXPERIMENTS IN A MUTUALISTIC ASSOCIATION BETWEEN THE RED ALGA JANIA ADHAERENS (RHODOPHYTA,CORALLINALES) AND THE SPONGE HALICLONA CAERULEA (PORIFERA: HAPLOSCLERIDA): MORPHOLOGICAL RESPONSES OF THE ALGA1

The association between the red macroalga Jania adhaerens J. V. Lamour. and the sponge Haliclona caerulea is the most successful life‐form between 2 and 4 m depth in Mazatlán Bay (Mexican Pacific). J. adhaerens colonizes the rocky intertidal area and penetrates into deeper areas only when it lives in association with H. caerulea. The aposymbiotic form of the sponge has not been reported in the bay. To understand the ecological success of this association, we examined the capacity of J. adhaerens to acclimate in Mazatlán Bay using transplant experiments. The transplanted aposymbiotic J. adhaerens did not survive the first 2 weeks; however, J. adhaerens when living in association with H. caerulea, acclimated easily to depth, showing no sign of mortality during the 103 d of the experiment. We conclude that the ability of J. adhaerens to colonize in deeper areas in this hydrodynamic environment may in part rely on the protection provided by the sponge to the algal canopy. Both species contribute to the shape of the associated form. Nevertheless, the morphological variation in the association appears to be dominated by the variation in J. adhaerens canopy to regulate pigment self‐shading under light‐limited conditions and/or tissue resistance under high hydrodynamics. Consequently, our results are consistent with light as the abiotic controlling factor, which regulates the lower depth distribution of the association in Mazatlán Bay, through limiting the growth rate of J. adhaerens. Hydrodynamics may determine the upper limit of the association by imposing high mass losses.