An Extreme Value Analysis of Pollutant Concentrations in Surface Soils Due to Atmospheric Deposition

Risk assessments often rely on deterministic models using long-term averages or “steady-state” values of input variables. Such models do not provide the information needed to estimate acute exposures. This study uses extreme value theory to examine the frequency and magnitude of daily pollutant concentrations in surface soils predicted at six U.S. locations. Concentrations are predicted using a deposition-leaching model and 50 years of historical precipitation data. A stochastic model also is used to generate 1000 years of precipitation data as modeling inputs for each location. The annual maximum concentrations at each site are fitted to a Gumbel type I distribution to estimate occurrence probability. For soluble pollutants, the predicted concentration varied substantially with precipitation, and the maximum daily concentrations exceeded annual averages by 4 to 8 times. Observed and synthetic precipitation data produced similar results at most study locations, though the synthetic data provided a slightly better fit to the Gumbel type I distribution. The precipitation model allows the generation of representative precipitation data that extend limited historical records. The extreme value analysis facilitates the evaluation of maximum pollutant concentrations, return periods, and other statistics that are important in evaluating acute exposures.     

Environmental and genetic control of crassulacean acid metabolism in two crassulacean species and an F1 hybrid with differing biomass δ13C values

Abstract The growth, biomass δ¹³C values, and ability to accumulate titratable acidity at night were compared in eight environmental treatments for Cremnophila linguifolia, Sedum greggii, and their F₁ hybrid. In the phytotron, differences in treatment daylength, day/night temperature and water availability were all found to have effects on total plant dry weight, nocturnal accumulation of titratable acidity and biomass δ¹³C value of at least some of the genotypes. However, there were differences between the genotypes both in the magnitude and direction of response of the phenotypic properties to the treatment variables. The phytotron δ¹³C values ranged from -12.9 to -19.2‰ for C. linguifolia, from -22.2 to -33.4‰ for S. greggii, and from -19.2 to -24.9‰ for the hybrid. After with-holding water for 76 h both C. linguifolia and the hybrid had midday Ψ_leaf values of -0.23 MPa; however, S. greggii had a value of -1.05 MPa. In contrast to past observations of other species, the daily watered plants of C. linguifolia had less negative δ¹³C values than did the plants watered only weekly.     

How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

The introduction ofMimorista pulchellalis [Lepidoptera: Pyraustidae] into South Africa for the biological control of jointed cactus,Opuntia aurantiaca. 2. Field evaluation

The mothMimorista pulchellalis was monitored over 2 years after liberation in a jointed cactus (Opuntia aurantiaca) infestation in South Africa. Moth and cactus densities were estimated using a system of randomly-assigned quadrats and the impact of the moth on the cactus population quantified. Moths appeared adapted to survive on the etiolated form of jointed cactus plants, killing approximately 1% of the increment in small plants annually. Large plants were also attacked but damage was negligible. The moths occurred in low numbers throughout the study period and generally went through 3 generations in a year.

---

Résumé La pyraleMimorista pulchellalis a été surveillée durant les deux années qui suivirent sa libération dans une infestation de figuier de Barbarie en Afrique du Sud. Les densités de pyrale et de cactus ont été estimées en utilisant un système de quadrats distribués au hasard et l'impact de la pyrale sur la population de cactus a été quantifiée. Les pyrales semblaient adaptées à survivre sur la forme étiolée des plants de cactus tuant approximativement 1% de l'accroissement annuel des petits plants. Les gros plants étaient aussi attaqués, mais les dégats étaient négligeables. La pyrale existait en faibles nombres durant toute la période d'étude et elle présentait généralement 3 générations par an.

     

Assessment of Optimal Selected Prognostic Factors

The identification and assessment of prognostic factors is one of the major tasks in clinical research. The assessment of one single prognostic factor can be done by recently established methods for using optimal cutpoints. Here, we suggest a method to consider an optimal selected prognostic factor from a set of prognostic factors of interest. This can be viewed as a variable selection method and is the underlying decision problem at each node of various tree building algorithms. We propose to use maximally selected statistics where the selection is defined over the set of prognostic factors and over all cutpoints in each prognostic factor. We demonstrate that it is feasible to compute the approximate null distribution. We illustrate the new variable selection test with data of the German Breast Cancer Study Group and of a small study on patients with diffuse large B‐cell lymphoma. Using the null distribution for a p‐value adjusted regression trees algorithm, we adjust for the number of variables analysed at each node as well. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Estimation of Tissue Construction Cost from Heat of Combustion and Organic Nitrogen Content

Abstract. We present a method for estimating the construction costs of plant tissues from measurements of heat of combustion, ash content, and organic nitrogen content. The method predicts glucose equivalents, the amount of glucose required to provide carbon skeletons and reductant to synthesize a quantity of organic product. Glucose equivalents have previously been calculated from the elemental composition of tissue. We define construction cost as the amount of glucose required to provide carbon skeletons, reductant and ATP for synthesizing the organic compounds in a tissue via standard biochemical pathways. The fraction of the total construction cost of a compound or tissue (excluding costs of transporting compounds) that is reflected in its glucose equivalents is the biosynthetic efficiency ( E _B). This quantity varies between 0.84 and 0.95 for tissues with a wide range of compositions. Using the new method, total construction cost can be estimated to ± 6% of the value obtained from biochemical pathway analysis.
Construction costs of leaves of three chaparral species were estimated using the proposed method and compared to previously published values, derived using different methods. Agreement among methods was generally good. Differences were probably due to a combination of inaccuracy in the estimated biosynthetic efficiency and technical difficulties with biochemical analysis, one of the older methods of determining construction cost.     

A practical test for in vitro evaluation of photosensitization: Assessment with hematoporphyrin derivative (HPD)

A simple procedure is described for the determination of the photosensitizing potency of drugs, using three leukemic cell lines, two of lymphocytic origin, L1210 and P388 and one of erythroid type, Friend-745. The procedure allows one to investigate several aspects of the photosensitization properties of tested compounds such as cellular localization and direct (trypan blue exclusion) or delayed (clonogenicity) photomediated toxicities.The method was assessed using crude hematoporphyrin derivative (HPD) as well as dihematoporphyrin ether (DHE) or commercially available Photofrin II. Results were compared to those obtained with normal cells, e.g spleen lymphocytes and erythropoietic stem cells (CFU-e), and discussed in the light of the relative response of normal versus transformed cells.Abbreviations DHE Dihematoporphyrin Ether - FCS Fetal Calf Serum - HPD Hematoporphyrin Derivative - PDT Photodynamic Therapy     

A gastric trichobezoar in a chimpanzee

A firm, mobile, oblong mass was discovered as an incidental finding in the stomach of a chimpanzee (Pan troglodytes) during routine surgery. It was removed and determined to be a trichobezoar.     

Optimal foraging: food patch depletion by ruddy ducks

Summary I studied the foraging behavior of ruddy ducks (Oxyura jamaicensis) feeding on patchily distributed prey in a large (5-m long, 2-m wide, and up to 2-m deep) aquarium. The substrate consisted of a 4x4 array of wooden trays (1.0-m long, 0.5-m wide, and 0.1-m deep) which contained 6 cm of sand. Any tray could be removed from the aquarium and loaded with a known number of prey. One bird foraged in the aquarium at a time; thus, by removing a food tray after a trial ended and counting the remaining prey, I calculated the number of prey consumed by the bird. I designed several experiments to determine if ruddy ducks abandoned a food patch in a manner consistent with the predictions of a simple, deterministic, patch depletion model. This model is based on the premise that a predator should maximize its rate of net energy intake while foraging. To accomplish this, a predator should only remain in a food patch as long as its rate of energy intake from that patch exceeds the average rate of intake from the environment. In the majority of comparisons, the number of food items consumed by the ruddy ducks in these experiments was consistent with the predictions of the foraging model. When the birds did not forage as predicted by the model, they stayed in the patch longer and consumed more prey than predicted by the model. An examination of the relation between rate of net energy intake and time spent foraging in the food patch indicated that by staying in a patch longer than predicted, the ruddy ducks experienced only a small deviation from maximum rate of net energy intake. These results provided quantitative support for the prediction that ruddy ducks maximize their rate of net energy intake while foraging.