High‐Performance Platinum‐Perovskite Composite Bifunctional Oxygen Electrocatalyst for Rechargeable Zn–Air Battery

Constructing highly active electrocatalysts with superior stability at low cost is a must, and vital for the large‐scale application of rechargeable Zn–air batteries. Herein, a series of bifunctional composites with excellent electrochemical activity and durability based on platinum with the perovskite Sr(Co_0.8Fe_0.2)_0.95P_0.05O_3?δ (SCFP) are synthesized via a facile but effective strategy. The optimal sample Pt‐SCFP/C‐12 exhibits outstanding bifunctional activity for the oxygen reduction reaction and oxygen evolution reaction with a potential difference of 0.73 V. Remarkably, the Zn–air battery based on this catalyst shows an initial discharge and charge potential of 1.25 and 2.02 V at 5 mA cm^?2, accompanied by an excellent cycling stability. X‐ray photoelectron spectroscopy, X‐ray absorption near‐edge structure, and extended X‐ray absorption fine structure experiments demonstrate that the superior performance is due to the strong electronic interaction between Pt and SCFP that arises as a result of the rapid electron transfer via the Pt? O? Co bonds as well as the higher concentration of surface oxygen vacancies. Meanwhile, the spillover effect between Pt and SCFP also can increase more active sites via lowering energy barrier and change the rate‐determining step on the catalysts surface. Undoubtedly, this work provides an efficient approach for developing low‐cost and highly active catalysts for wider application of electrochemical energy devices.     

Oxygen‐Deficient Blue TiO2 for Ultrastable and Fast Lithium Storage

Developing a titanium dioxide (TiO₂)‐based anode with superior high‐rate capability and long‐term cycling stability is important for efficient energy storage. Herein, a simple one‐step approach for fabricating blue TiO₂ nanoparticles with oxygen vacancies is reported. Oxygen vacancies can enlarge lattice spaces, lower charge transfer resistance, and provide more active sites in TiO₂ lattices. As a result, this blue TiO₂ electrode exhibits a highly reversible capacity of 50 mAh g^?1 at 100 C (16 800 mA g^?1) even after 10 000 cycles, which is attributable to the combination of surface capacitive process and remarkable diffusion‐controlled insertion revealed by the kinetic analysis. The strategy of employing oxygen‐deficient nanoparticles may be extended to the design of other robust semiconductor materials as electrodes for energy storage.     

Single‐Crystalline Ultrathin Co3O4 Nanosheets with Massive Vacancy Defects for Enhanced Electrocatalysis

The role of vacancy defects is demonstrated to be positive in various energy‐related processes. However, introducing vacancy defects into single‐crystalline nanostructures with given facets and studying their defect effect on electrocatalytic properties remains a great challenge. Here this study deliberately introduces oxygen defects into single‐crystalline ultrathin Co₃O₄ nanosheets with O‐terminated {111} facets by mild solvothermal reduction using ethylene glycol under alkaline condition. As‐prepared defect‐rich Co₃O₄ nanosheets show a low overpotential of 220 mV with a small Tafel slope of 49.1 mV dec^?1 for the oxygen evolution reaction (OER), which is among the best Co‐based OER catalysts to date and even more active than the state‐of‐the‐art IrO₂ catalyst. Such vacancy defects are formed by balancing with reducing environments under solvothermal conditions, but are surprisingly stable even after 1000 cycles of scanning under OER working conditions. Density functional theory plus U calculation attributes the enhanced performance to the oxygen vacancies and consequently exposed second‐layered Co metal sites, which leads to the lowered OER activation energy of 2.26 eV and improved electrical conductivity. This mild solvothermal reduction concept opens a new door for the understanding and future designing of advanced defect‐based electrocatalysts.     

Minutes-Fast Production of Vacancy-Enriched MXenes as an Efficient Platform for Single-Atom Electrocatalysts

Although MXenes have been synthesized by liquid phase and molten salt etching approaches, it still suffers from sluggish reaction kinetics of removing A species from MAX phases associated with an overlong production time (5–48 h). Here, a minute-level production approach is developed to produce MXenes (Ti₂CCl_x) by selectively etching MAX phases (Ti₂AlC) under metal chloride (ZnCl₂) vapor. In this synthetic protocol, metal chloride vapor possesses a very high chemical activity to the interlaminar A metal layers of MAX phases owing to negative Gibbs free energies, accompanied with the fast removal of gaseous A-containing chlorides in the reaction system. Moreover, some M species can be controllably etched off from the lattice of MX slabs to generate metal vacancies, which have a high reducing ability to implant single-atom Zn from ZnCl₂ vapor. Finally, vacancy-enriched MXenes are produced after the volatilization of Zn. In this manner, the etching time is less than one-sixtieth those of liquid phase and molten salt etching approaches. The resultant MXenes can be employed as an efficient platform for implanting single-atom Pt, showing a low overpotential of 41 mV at a current density of 10 mA cm⁻² and a good long-term stability up to 5000 cycles.     

Highly Reversible Oxygen‐Redox Chemistry at 4.1 V in Na4/7−x[□1/7Mn6/7]O2 (□: Mn Vacancy)

Increasing the energy density of rechargeable batteries is of paramount importance toward achieving a sustainable society. The present limitation of the energy density is owing to the small capacity of cathode materials, in which the (de)intercalation of ions is charge‐compensated by transition‐metal redox reactions. Although additional oxygen‐redox reactions of oxide cathodes have been recognized as an effective way to overcome this capacity limit, irreversible structural changes that occur during charge/discharge cause voltage drops and cycle degradation. Here, a highly reversible oxygen‐redox capacity of Na₂Mn₃O₇ that possesses inherent Mn vacancies in a layered structure is found. The cross validation of theoretical predictions and experimental observations demonstrates that the nonbonding 2p orbitals of oxygens neighboring the Mn vacancies contribute to the oxygen‐redox capacity without making the Mn?O bond labile, highlighting the critical role of transition‐metal vacancies for the design of reversible oxygen‐redox cathodes.     

Selectively Etching Vanadium Oxide to Modulate Surface Vacancies of Unary Metal–Based Electrocatalysts for High‐Performance Water Oxidation

Electrocatalytic water splitting for hydrogen generation is hindered by the sluggish kinetics of water oxidation, and highly efficient electrocatalysts for the oxygen evolution reaction (OER) are urgently required. Numerous bi‐ and multimetal‐based, low‐cost, high‐performance OER electrocatalysts have been developed. However, unary metal–based high‐performance electrocatalysts are seldom reported. In the present study, Co₂(OH)₃Cl/vanadium oxide (VO_y) composites are synthesized, from which VO_y is completely etched out by a simple cyclic voltammetry treatment, which simultaneously transforms Co₂(OH)₃Cl in situ to ultrafine CoOOH. The selective removal of VO_y modulates the nature of the surface in the obtained CoOOH by creating surface oxygen vacancies (V_o), along with disordered grain boundaries. The best‐performing CoOOH with optimum V_o is found to be associated with a low overpotential of 282 mV at 10 mA cm^?2 catalytic current density on a simple glassy carbon electrode for OER. This facile protocol of selectively etching VO_y to modulate the nature of the surface is successfully applied to synthesize another Fe‐based electrocatalyst with high OER performance, thus establishing its utility for unary metal–based electrocatalyst synthesis.     

Nitrogen and Sulfur Vacancies in Carbon Shell to Tune Charge Distribution of Co6Ni3S8 Core and Boost Sodium Storage

Recently, the metal sulfide‐carbon nanocomposites have been suggested as a low‐cost alternative to lithium ion batteries, but commercial application is seriously hindered by their relatively inferior cyclic performance. Herein, N and S vacancies in an N,S co‐doped carbon (NSC) shell for anchoring a new bimetallic sulfide core of Co₆Ni₃S₈ using Co‐Ni‐alginate biomass are introduced. The obtained Co₆Ni₃S₈/carbon aerogels (Co₆Ni₃S₈/NSCA) exhibit excellent sodium‐ion storage properties, high reversible capacity (568.1 mAh g^?1 at 1 A g^?1), and an excellent cycle stability (94.4% after 300 cycles). Density functional theory calculation results disclose that nitrogen and sulfur vacancies in the carbon shell can enhance the binding between the Co₆Ni₃S₈ core and NSC shell, ensuring an improved structural and electrochemical stability. In addition, an increased adsorption energy of Na⁺ (?1.88 eV) and a decreased barrier energy for Na⁺ diffusion (0.46 eV) are observed indicating a fast Na⁺ diffusion process. The powder X‐ray diffraction refinement confirms that the lattice parameters of Co₆Ni₃S₈ extend to 0.9972 nm compared with Co₉S₈ (0.9928 nm), suppressing the volume expansion in Na⁺ diffusion processes.     

Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency

The low power conversion efficiency (PCE) of tin‐based hybrid perovskite solar cells (HPSCs) is mainly attributed to the high background carrier density due to a high density of intrinsic defects such as Sn vacancies and oxidized species (Sn⁴⁺) that characterize Sn‐based HPSCs. Herein, this study reports on the successful reduction of the background carrier density by more than one order of magnitude by depositing near‐single‐crystalline formamidinium tin iodide (FASnI₃) films with the orthorhombic a‐axis in the out‐of‐plane direction. Using these highly crystalline films, obtained by mixing a very small amount (0.08 m ) of layered (2D) Sn perovskite with 0.92 m (3D) FASnI₃, for the first time a PCE as high as 9.0% in a planar p–i–n device structure is achieved. These devices display negligible hysteresis and light soaking, as they benefit from very low trap‐assisted recombination, low shunt losses, and more efficient charge collection. This represents a 50% improvement in PCE compared to the best reference cell based on a pure FASnI₃ film using SnF₂ as a reducing agent. Moreover, the 2D/3D‐based HPSCs show considerable improved stability due to the enhanced robustness of the perovskite film compared to the reference cell.     

The Role of Cation Vacancies in Electrode Materials for Enhanced Electrochemical Energy Storage: Synthesis,Advanced Characterization,and Fundamentals

The incorporation of atomic scale defects, such as cation vacancies, in electrode materials is considered an effective strategy to improve their electrochemical energy storage performance. In fact, cation vacancies can effectively modulate the electronic properties of host materials, thus promoting charge transfer and redox reaction kinetics. Such defects can also serve as extra host sites for inserted proton or alkali cations, facilitating the ion diffusion upon electrochemical cycling. Altogether, these features may contribute to improved electrochemical performance. In this review, the latest progress in cation vacancies‐based electrochemical energy storage materials, covering the synthetic approaches to incorporate cation vacancies and the advanced techniques to characterize such vacancies and identify their fundamental role, are provided from the chemical and materials point of view. The key challenges and future opportunities for cation vacancies‐based electrochemical energy storage materials are also discussed, particularly focusing on cation‐deficient transition metal oxides (TMOs), but also including newly emerging materials such as transition metal carbides (MXenes).