Phenotypic plasticity in response to mechanical stress: hydrodynamic performance and fitness of four aquatic plant species

Plastic responses of plants exposed to mechanical stress can lead to modified, performance-enhancing, morphologies, sometimes accompanied by costs to reproduction. The capacity to present short-term plastic responses to current stress, the resulting performance (expected lower mechanical forces), and the costs of such responses to reproduction were tested for four aquatic plant species. Two ramets of the same genet were submitted to running vs standing water treatment. Traits describing the morphology, hydrodynamic performance and reproduction (sexual and vegetative) were measured. For one species, plastic responses led to reduced hydrodynamic forces, without apparent costs to reproduction, indicating that the plastic response could be beneficial for plant maintenance in stressful habitats. For two species, plastic responses were not associated with variations in performance and reproduction, possibly because of the low hydrodynamic forces experienced, even for morphologies produced under standing conditions. For one species, plastic responses were associated with a sharp decrease in sexual reproduction, without variations in performance, revealing the negative impact of currents over a short time scale. Species maintenance is linked to the capacity of individuals to tolerate mechanical forces. The contrasting responses to currents may be a key element for predicting community dynamics.     

The effects of mechanically-induced stress in plants — a review

Mechanically-induced stress (MIS) occurs naturally in plants as the aerial parts are moved, usually by wind, but also by such agents as rain and animals. It can be induced indoors by various actions such as rubbing or bending the stem or shaking or brushing the entire shoot. The most noticeable effect of MIS is a reduction in stem, leaf or petiole length invariably resulting in plants which are smaller and more compact than unstressed controls. However, the response of other variables can often differ between species and there may be either increases or decreases in stem or petiole diameter, root: shoot weight ratio, chlorophyll content or drought resistance. Why species should differ in this way, and what is the endogenous control mechanism for MIS responses, are inanswered questions. Ethylene, which increases as a result of MIS in several species may cause some MIS responses such as increased stem diameter, epinasty or a change in sex expression. However, evidence suggests that MIS retardation of extension growth may equally be due to lower or supraoptimal auxin levels or lower gibberellin levels.The uses in the field of the growth promoter gibberellin or the growth retardant chlormequat chloride (CCC) appear to be examples of respectively reversing or stimulating MIS growth response. MIS may be applied indoors if short compact plants are needed, either for aesthetic purposes as with floral crops, or if hardier and more manageable plants are needed, such as seedlings for transplanting in the field. Much more research is needed to estimate the importance of MIS in the field and to assess how such knowledge may be used to improve crop yield.     

Partial mechanical stimulation facilitates the growth of the rhizomatous plant Leymus secalinus: modulation by clonal integration

Background and Aims

Mechanical stimulation (MS) often induces plants to undergo thigmomorphogenesis and to synthesize an array of signalling substances. In clonal plants, connected ramets often share resources and hormones. However, little is known about whether and how clonal integration influences the ability of clonal plants to withstand MS. We hypothesized that the effects of MS may be modulated by clonal integration.

Methods

We conducted an experiment in which ramet pairs of Leymus secalinus were subjected to three treatments: (1) connected ramet pairs under a homogeneous condition [i.e. the proximal (relatively old) and distal (relatively young) ramets were not mechanically stressed]; (2) connected ramet pairs under a heterogeneous condition (i.e. the proximal ramet was mechanically stressed but the distal ramet was not); and (3) disconnected ramet pairs under the same condition as in treatment 2. At the end of the experiment, we harvested all plants and determined their biomass and allocation.

Key Results

Clonal integration had no significant influence on measured traits of distal L. secalinus ramets without MS. However, under MS, plants with distal ramets that were connected to a mother ramet produced more total plant biomass, below-ground biomass, ramets and total rhizome length than those that were not connected. Partial MS exerted local effects on stimulated ramets and remote effects on connected unstimulated ramets. Partial MS increased total biomass, root/shoot ratio, number of ramets and total rhizome length of stimulated proximal ramets, and increased total biomass, root weight ratio, number of ramets and total rhizome length of connected unstimulated ramets due to clonal integration.

Conclusions

These findings suggest that thigmomorphogenesis may protect plants from the stresses caused by high winds or trampling and that thigmomorphogenesis can be strongly modulated by the degree of clonal integration.     

The effects of mechanical stress and spectral shading on the growth and allocation of ten genotypes of a stoloniferous plant

BACKGROUND AND AIMS: Because plants protect each other from wind, stand density affects both the light climate and the amount of mechanical stress experienced by plants. But the potential interactive effects of mechanical stress and canopy shading on plant growth have rarely been investigated and never in stoloniferous plants which, due to their creeping growth form, can be expected to respond differently to these factors than erect plants. METHODS: Plants of ten genotypes of the stoloniferous species Potentilla reptans were subjected to two levels of mechanical stress (0 or 40 daily flexures) and two levels of spectral shading (15 % of daylight with a red:far red ratio of 0.3 vs. 50 % daylight and a red:far red ratio of 1.2). KEY RESULTS: Mechanically stressed plants produced more leaves with shorter more flexible petioles, more roots, and more but less massive stolons. Responses to spectral shading were mostly in the opposite direction to thigmomorphogenesis, including the production of thinner, taller petioles made of more rigid tissue. The degree of thigmomorphogenesis was either independent of light climate or stimulated by spectral shading. At the genotypic level there were no clear correlations between responses to shade and mechanical stress. CONCLUSIONS: These results suggest that in stoloniferous plants mechanical stress results in clones with a more compact, shorter shoot structure and more roots. This response does not appear to be suppressed by canopy shading, which suggests that wind shielding (reduced mechanical stress) by neighbours in dense vegetation serves as a cue that induces shade avoidance responses such as increased petiole elongation.     

Phenotypic plasticity of stem elongation in two ecotypes of Stellaria longipes: the role of ethylene and response to wind

Using two ecotypes of Stellaria longipes an alpine form with low plasticity and a prairie form with high plasticity, we investigated whether ethylene was involved in the response to wind stress and might be important in controlling plasticity of stem elongation. Stem growth inhibition was positively correlated with concentration of ethephon application and elevation in ambient ethylene in alpine ecotypes, whereas stem growth in prairie plants was stimulated by low ethephon concentrations. When treated with high AVG, the effects were reversed: alpine plant growth was promoted and prairie plant growth was inhibited. Prairie plants exhibited a daily rhythm in ethylene evolution which increased and peaked at 1500 h, and which was absent in alpine plants. Ethylene evolution did not change significantly during the first 2 weeks of growth in alpine plants, whereas ethylene in prairie plants increased significantly during periods of rapid stem elongation. Wind treatment inhibited growth in both ecotypes, but only alpine plants showed a recovery of growth to control levels when wind stressed plants were pretreated with STS. In addition, only alpine plants showed an increase in ethylene evolution in response to wind simulation, whereas prairie plant ethylene evolution did not deviate from rhythms observed in unstressed plants. We concluded that ethylene dwarfs stems in alpine S. longipes in response to wind stress. However, low levels of ethylene may stimulate growth in prairie ecotypes and act independently of wind stress intensity. The contrasting ability to synthesize and respond to ethylene can account for part of the difference in plasticity documented between the two ecotypes.     

Carry-over of thigmomorphogenetic characteristics in calli derived fromBryonia dioica internodes

Calli have been initiated in vitro from young internodes (control and rubbed) ofBryonia dioica, where previously it had been shown, using intact plants, that rubbing induced limited growth through enhanced lignification. Calli derived from rubbed internodes were somewhat more compact and showed biochemical changes, i.e. enhanced activity of total peroxidase and isoperoxidases, enhanced production of 1-aminocyclopropane-1-carboxylic acid (ACC) and ethylene, enhanced tissue capacity to convert ACC into ethylene, enhanced activity of phenylalanine ammonia-lyase (PAL) and higher content of lignin, which characterized rubbed internodes. Differences in ethylene metabolism between the two types of calli tended to fade from the third week onwards of initial culture, whereas lignin content, peroxidase activity and peroxidase isoenzyme pattern appeared to be more persistant rubbing-induced markers for several subcultures. The results point to the persistance of environmentally induced changes in gene expression.     

植物对机械刺激的响应及信号转导

机械刺激是一种广泛存在但却长期被忽视的环境胁迫因子。由于其营固于土壤的生活习性,植物在其整个生命过程中都不同程度地遭受着机械刺激的胁迫,它影响着植物的生长发育、形态建成、抗逆性的形成等。本文结合我们实验室的研究成果及国内外的研究进展,综述了植物对机械刺激的响应、机械刺激在细胞内诱发的信号事件、各种信号之间的信号交谈及基因表达,并对未来的研究方向提出了展望。