Gradients in maize roots: local elongation and pH

The elongation rate, the gradient of the local elongation rate and the surface pH of maize roots were measured over 12 h. A data bank was constituted by storing these values. By sorting these results on the basis of different elongation rates, different classes of root were obtained. Two classes were chosen: the low-growth roots and the high-growth roots. The mean growth of these two root classes was stable with time and differed significantly from one another. The surface pH of the elongation zone was the same for the roots of these two classes, but the roots selected for their higher growth rate had a larger acid efflux in this zone.     

Nonthermal Plasma‐Induced Degradation of Morin and Enhancement of Biological Activities

In the present study, non‐thermal dielectric barrier discharge (DBD) plasma of induced structural changes of morin resulted in the isolation of one previously undescribed benzofuranone derivative, along with two known compounds. The chemical structures of these degradation products were elucidated by UV, NMR and FAB‐MS spectroscopic analyses. The isolated three compounds showed potent antioxidative activities in two different tests, with IC₅₀ values in the range of 12.9–41.8 μm in the 2,2′‐azino‐bis (3‐ethylbenzothiazoline‐6‐sulfonic acid) (ABTS⁺) radical scavenging activity, 19.0–71.9 μm for hydroxyl radical scavenging activity test. Furthermore, the new methoxylated benzofuranone exhibited enhancement of inhibitory effects against pancreatic lipase with an IC₅₀ value of 90.7±1.6 μm , when compared to the parent morin. These results suggested that the degradation products isolated from plasma exposed morin might be beneficial for prevention of obesity and related diseases.     

Cyanobacteria passage through drinking water filters during perturbation episodes as a function of cell morphology, coagulant and initial filter loading rate

Eight pilot-scale in-line filtration trials were performed to evaluate the passage of cyanobacterial cells through drinking water filters after sudden increases in hydraulic loading rates. Trials were performed at 30 °C using two coagulant combinations (aluminum sulfate and cationic polymer or ferric chloride and cationic polymer), two initial filter loading rates (7 or 10 m/h) and two species of morphologically different cyanobacteria (Microcystis aeruginosa or Anabaena flos aquae). The filter was perturbed by instantaneously increasing the hydraulic loading rate by 50%. Filter influent and effluent water qualities were characterized by measuring turbidity, particles and chlorophyll a. The observed post-perturbation filter effluent chlorophyll a peaks were 1.6–48 times greater than the pre-perturbation averages. Chlorophyll a peaks were larger for M. aeruginosa than for A. flos aquae. Chlorophyll a peaks were also larger for the higher (10 m/h) than for the lower (7 m/h) initial filter loading rate. The post-perturbation effluent turbidity peaks were 1.4–7.2 times greater than the pre-perturbation averages. The post-perturbation effluent particle peaks were 6.5–25 times greater than the pre-perturbation averages. These results indicate that particles were a more sensitive indicator of cyanobacterial passage than turbidity.     

Radioiodinated surface proteins of rabbit trophectoderm cells

Summary We have previously used surface iodination to discriminate between the protein patterns of epithelial cell surfaces in uteri of rabbits receptive (Day 6.5) or nonreceptive (Day 4) to nidation (Ricketts et al. 1984). In this paper, we describe application of the same technique to the trophoblastic surface of rabbit blastocysts collected on the same days of pregnancy. Analysis of labelled proteins by polyacrylamide-gel electrophoresis under denaturing conditions did not reveal qualitative differences between the two days of pregnancy. Scanning densitometry was used to quantitate the area under each protein peak on an autoradiogram; these areas were used as variables in statistical analysis of the protein pattern of individual animals. Quantitative differences between the protein patterns of the two surfaces were detected by canonical variate analysis of the pattern of relative areas of labelled protein peaks. In proteins separated on 7.5% gels, this statistical analysis correctly assigned blastocysts from 8 out of 10 animals to one of two groups according to day of pregnancy. The discrimination was not statistically significant, however, in protein patterns on 12.5% gels, used to give better separation in the lower range of molecular weights. The same analysis in the uterus unequivocally separated the surface iodination patterns from these same days of pregnancy. Thus the changes detected by surface iodination appear to be less pronounced on the trophectoderm than on the uterine epithelium in relation to the time of ovoimplantation.     

Tuning cellular responses to BMP-2 with material surfaces

Bone morphogenetic protein 2 (BMP-2) has been known for decades as a strong osteoinductive factor and for clinical applications is combined solely with collagen as carrier material. The growing concerns regarding side effects and the importance of BMP-2 in several developmental and physiological processes have raised the need to improve the design of materials by controlling BMP-2 presentation. Inspired by the natural cell environment, new material surfaces have been engineered and tailored to provide both physical and chemical cues that regulate BMP-2 activity. Here we describe surfaces designed to present BMP-2 to cells in a spatially and temporally controlled manner. This is achieved by trapping BMP-2 using physicochemical interactions, either covalently grafted or combined with other extracellular matrix components. In the near future, we anticipate that material science and biology will integrate and further develop tools for in vitro studies and potentially bring some of them toward in vivo applications.     

Zosteric acid and salicylic acid bound to a low density polyethylene surface successfully control bacterial biofilm formation

The active moieties of the anti-biofilm natural compounds zosteric (ZA) and salicylic (SA) acids have been covalently immobilized on a low density polyethylene (LDPE) surface. The grafting procedure provided new non-toxic eco-friendly materials (LDPE-CA and LDPE-SA) with anti-biofilm properties superior to the conventional biocide-based approaches and with features suitable for applications in challenging fields where the use of antimicrobial agents is limited. Microbiological investigation proved that LDPE-CA and LDPE-SA: (1) reduced Escherichia coli biofilm biomass by up to 61% with a mechanism that did not affect bacterial viability; (2) significantly affected biofilm morphology, decreasing biofilm thickness, roughness, substratum coverage, cell and matrix polysaccharide bio-volumes by >80% and increasing the surface to bio-volume ratio; (3) made the biofilm more susceptible to ampicillin and ethanol. Since no molecules were leached from the surface, they remained constantly effective and below the lethal level; therefore, the risk of inducing resistance was minimized.     

Purification of Neuronal Cell Surface Proteins and Generation of Epitope-Specific Monoclonal Antibodies Against Cell Adhesion Molecules

To establish a procedure for the purification of a broad spectrum of cell surface proteins, three separate methods based on different principles were compared with the aid of four marker proteins. Membrane preparation by sedimentation-flotation centrifugation, temperature-induced phase separation with Triton X-114, and lectin affinity chromatography were used separately as well as in combination. The two-step procedure of membrane preparation and lectin affinity chromatography provided by far the best enrichment of cell surface marker proteins. This result was further substantiated by screening greater than 6,600 hybridoma cultures that originated from mice that had been immunized with protein fractions obtained by different purification protocols. In addition, it was found that solubilized glycoproteins used as immunogens led to many more cell surface-specific monoclonal antibodies than glycoproteins immobilized on lectin-agarose beads. Three monoclonal antibodies that recognize distinct epitopes of cell adhesion molecules (CAMs) were isolated. Monoclonal antibody C4 bound to a detergent-labile epitope of G4 (neuron-glia CAM). Monoclonal antibody D1 recognized specifically nonreduced neural CAM (N-CAM) with intact disulfide bridges, and monoclonal antibody D3 recognized only the 180-kilodalton isoform of N-CAM. Because of these specificities, these monoclonal antibodies promise to be useful tools for the elucidation of the structural organization of adhesion molecules.     

Hyperthermic treatment of chromomycosis with disposable chemical pocket warmers

A case of chromomycosis in which hyperthermia proved effective is reported. The patient was a 56-year-old male bean curd maker who, without any previous history of minor trauma, developed on the extensor side of the left upper arm an eczematous lesion that underwent gradual radial expansion. The lesion showed a well-defined, 7×10 cm infiltrated erythematous plaque with the central area healed and, at the upper and lower borders, adherent scales and crusts on the surface. Histological examination revealed granulomatous changes in the dermis, as well as sclerotic cells within giant cells and microabscesses. On culturing,Fonsecaea pedrosoi was isolated. The patient was treated with disposable chemical pocket warmers, which were secured over the lesion with a rather tight elastic bandage, so that they kept the affected area warm for 24 hours a day. After a month of such hyperthermic treatment, the erythema and infiltration had decreased considerably, and microscopic examination and culture of the crusts both yielded negative results. Examination of biopsy specimens of the lesion after the third month showed that it had cicatrized. The treatment was stopped after 4 months, and no relapse occurred. We also summarize the published results of local hyperthermic treatment of chromomycosis in Japan.     

Methods for rapid screening and isolation of bacteria producing acidic lipase: feasibility studies and novel activity assay protocols

Acidic lipase finds its commercial values in medical applications and bioremediation of food wastes. In this work, approaches for rapid screening of lipase-producing bacteria were developed and the feasibility assessment of the screening methods was performed. From food waste samples, the proposed screening procedures allowed isolation of sixteen pure bacterial strains expressing higher lipase activity at acidic pH (pH 6.0) than at alkaline pH (pH 9.0). To enhance the accuracy of lipase activity determination under acidic conditions, a novel assay procedure was also developed by deactivating lipase activity by microwave treatment prior to back titration. This additional step could minimize interferences arising from residual lipase activity during conventional direct back-titration methods in measuring lipase activity at acidic pH. Using the four strategies proposed in this work, the best acidic-lipase-producing isolate was obtained by strategy C (SSC) and was identified as Aeromonas sp. C14, displaying an optimal lipase activity of 0.7 U/ml at an acidic pH of 6.0.