Effects of selection and fate of substrates supplied to anaerobic bacteria involved in the corrosion of pipe-line steel

Summary The corrosion of AISI C1020 carbon steel in an anoxic, marine, sulphide-containing environment was examined as a function of bacterial physiology and consortial complexity. The carbon steel was exposed to three organism;Eubacterium limosum, Desulfovibrio sp. andDesulfobacter sp. which were provided with H₂/CO₂, butanol, glucose, and acetate as carbon and electron sources. A consortium of these bacteria utilizing hydrogen gave rise to relatively high corrosion rates (5.7×10^–4 mhos cm^–2) with respect to corrosion resulting from bacteria supplied with organic electron sources (0.6–1.6×10^–4 mhos cm^–2). Disproportionation of electrons between sulphate reduction and fermentation had a significant effect on the corrosion rate in the case ofDesulfovibrio. Surface examination using scanning electron microscopy coupled with electrochemical impedance spectroscopy supported the hypothesis that the corrosion rate was controlled by the relative intactness of a ferrous sulphide film in which the bacteria were embedded.     

Stainless steel mesh supports high density cell growth and production of recombinant Mullerian Inhibiting Substances

Summary Stainless steel mesh supported the high density growth of anchorage dependent CHO fibroblasts without the use of a special culture system. CHO cells, designated B-9, containing an amplified genomic construct of the human gene for Mullerian Inhibiting Substance (MIS), grew to a high confluent density on stainless steel meshwork while producing substantial amounts of human recombinant MIS over a long period of time. The mesh could be easily coated with various extracellular matrix proteins, such as Laminin, Fibronectin, Collagen or Matrigel, which permitted the testing of the effects of surface modifications on cell yield and recombinant protein production. Since the amount of medium per surface area required for optimal cell growth is lower than for some large volume cell culture methods, media costs can be reduced using mesh. In addition, no special cell culture equipment or complex manipulations are required. Thus, the use of meshwork for anchorage-dependent cells can increase the efficiency of growth and decrease the cost of recombinant protein production. This work is supported by NIH grant CA 17393 and American Cancer Society grant PDT 221A to P. K. D. and NIH grant EY 06535 to J. E. Editor's Statement This approach to large scale, high density cultivation of cells, one of several which are based on increasing surface area of the cultures, allows the production of large amounts of recombinant product within a research laboratory with modest bulk culture capability.     

Development of silver-containing austenite antibacterial stainless steels for biomedical applications Part I: microstructure characteristics,mechanical properties and antibacterial mechanisms

The as-quenched (AQ) microstructure of the Ag-containing alloys was found to be essentially a mixture of austenite (γ) and Ag phases. The Ag phase precipitates had a face-centered-cubic structure and lattice parameter a = 4.09 Å. When the alloy contained Ag ≥0.2 wt%, the mechanical properties were slightly enhanced because of the precipitate strengthening by the Ag phase precipitates. Moreover, the Ag-containing alloys exhibited ductile fracture after tensile testing. The results of an antibacterial test revealed that the Ag phase precipitates play a key role in the antibacterial mechanism of Ag-containing alloys: Ag⁺ ions released from the Ag phase precipitates can kill bacteria. It is suggested that as AISI 316L alloy has an Ag content ≥0.2 wt%, it will have excellent antibacterial properties against both Staphylococcus aureus and Escherichia coli, with an antibacterial rate of nearly 100%.     

The use of biocides to control sulphate‐reducing bacteria in biofilms on mild steel surfaces

Three different types of biocides, viz. formaldehyde (FM), glutaraldehyde (GA) and isothiozolone (ITZ) were used to control planktonic and sessile populations of two marine isolates of sulphate‐reducing bacteria (SRB). The influence of these biocides on the initial attachment of cells to mild steel surfaces, on subsequent biofilm formation and on the activity of hydrogenase enzymes within developed biofilms was evaluated. In the presence of biocides the rate and degree of colonization of mild steel by SRB depended on incubation time, bacterial isolate and the type of biocide used. Although SRB differed in their susceptibility to biocides, for all isolates the biofilm population was more resistant to the treatment than the planktonic population. GA showed highest efficiency in controlling planktonic and sessile SRB compared with the other two biocides. The activity of the enzyme hydrogenase measured in SRB biofilms varied between isolates and with the biocide treatment. No correlation was found between the number of sessile cells and hydrogenase activity.     

含铜抗菌不锈钢的抗菌性能研究

对铁素体和奥氏体2种含铜抗菌不锈钢的抗菌性能进行了考察.采用覆膜法检测抗菌率,用透射电镜观察与铁素体抗菌不锈钢作用后的大肠埃希菌细胞形态.2种抗菌不锈钢材料对供试的 17 株常见菌,除产气肠杆菌外均显示较强的抗菌性能,抗菌谱广;铁素体和奥氏体对1×107 cfu/mL及以下浓度的大肠埃希菌在 24 h内杀灭率达到99%;铁素体和奥氏体分别在作用 3 h和 9 h时可将1×107 cfu/mL的大肠埃希菌全部杀灭;打磨次数和环境温度的变化不影响2种抗菌不锈钢的杀菌率;透射电镜结果显示,与抗菌不锈钢作用后的大肠埃希菌菌体结构松散,细胞壁和细胞膜破裂,有内容物漏出.铁素体和奥氏体抗菌不锈钢均具优良的抗菌性能,抗菌谱广,与其作用后的细菌菌体破裂,有内容物溶出,最终致菌死亡.     

Physico-chemical and hygienic property modifications of stainless steel surfaces induced by conditioning with food and detergent

The effect of repeated conditioning procedures (25 runs), consisting of soiling (milk and meat products) and cleaning steps, on the hygienic status, physico-chemical properties and surface chemical composition of stainless steel (SS) surfaces, was investigated. Five SSs differing in grade and finish were used. Both soiling and surface cleaning/conditioning procedures resulted in a similar increase in the surface contamination with carbon, while the changes in the basic component of the surface free energy depended on the conditioning procedure. The passive film was also affected, the Fe/Cr ratio in particular. The hygienic status was also changed, especially with milk as shown by monitoring the number of residual adhering Bacillus cereus spores after contaminating the surface with spores followed by cleaning. The results show that in food environments, the presence and the nature of conditioning molecules play a major role in the hygienic status of SS surfaces.     

Demonstration of biofilm removal from type 304 stainless steel using pulsed-waveform electropolishing

Abstract

This article describes an electrochemical method to remove bacterial biofilm from a stainless steel (SS) surface using a potential pulse/reverse pulse technique. This technique employs a periodic waveform that consists of anodic and cathodic pulses. The pulses can effectively strip a thin layer of metal off the SS surface, along with the adherent biofilm, in a saline solution. Not only can the pulses effectively remove biofilm from the SS surface, but they also regenerate the original mirror-like shiny surface. The importance of this electrochemical biofilm removal method is its wide applicability for any types of biofilms. That is, instead of directly removing the biofilm, it removes a very thin layer of the metal under the biofilm. Thus, the removal process is independent to the nature of the biofilms. Furthermore, this electrochemical biofilm removal method is rapid (less than 30?s of potential pulse time) and does not require hazardous chemicals.     

Using enzymes to remove biofilms of bacterial isolates sampled in the food-industry

The aim of this study was to analyze the cleaning efficiency of polysaccharidases and proteolytic enzymes against biofilms of bacterial species found in food industry processing lines and to study enzyme effects on the composition of extracellular polymeric substances (EPS) and biofilm removal in a Clean-in-Place (CIP) procedure. The screening of 7 proteases and polysaccharidases for removal of biofilms of 16 bacterial species was first evaluated using a microtiter plate assay. The alkaline pH buffer removed more biofilm biomass as well as affecting a larger range of bacterial species. The two serine proteases and α-amylase were the most efficient enzymes. Proteolytic enzymes promoted biofilm removal of a larger range of bacterial species than polysaccharidases. Using three isolates derived from two bacterial species widely found in food processing lines (Pseudomonas fluorescens and the Bacillus cereus group), biofilms were developed on stainless steel slides and enzymatic solutions were used to remove the biofilms using CIP procedure. Serine proteases were more efficient in removing cells of Bacillus biofilms than polysaccharidases. However, polysaccharidases were more efficient in removing P. fluorescens biofilms than serine proteases. Solubilization of enzymes with a buffer containing surfactants, and dispersing and chelating agents enhanced the efficiency of polysaccharidases and proteases respectively in removing biofilms of Bacillus and P. fluorescens. A combination of enzymes targeting several components of EPS, surfactants, dispersing and chelating agents would be an efficient alternative to chemical cleaning agents.     

Metal corrosion by aerobic bacteria isolated from stimulated corrosion systems: Effects of additional nitrate sources

Many microorganisms are reported to influence the corrosive behaviour of mild steel and stainless steel in different habitats. In this study, 40 bacterial strains were isolated from corroded mild steel and stainless steel coupons in the nitrate supplemented environments. The corrosion abilities of the isolates against the mild steel and stainless steel coupons were tested with or without additional nitrate sources. The presence of bacterial isolates alone stimulated the corrosion of mild steel coupons. Most of the bio-corrosion processes of mild steel coupons were mitigated by adding nitrate supplement with bacterial isolates. The effects of bacterial isolates and additional nitrogen sources on corrosion of stainless steels were varied. Not all bacterial isolates stimulated the corrosion on stainless steel during the study period. Unlike the effects on mild steel coupons, additional NaNO₃ might stimulate, retard the corrosion rate by the bacterial isolates or have limited effects. Similar results were obtained when NH₄NO₃ was used. Phylogenetic analysis demonstrated that all isolates were closely related. The majority of the bacterial isolates from corroded metal coupons were identified as Bacillus species. Others were identified as Pseudomonas sp., Marinobacter sp., and Halomonas species. The results prove that the isolated aerobic microorganisms do play a role in the corrosion process of stainless and mild steel. Adding additional nitrate sources might be a tool to mitigate corrosion of mild steel which was stimulated by the presence of bacteria. However, to prevent the corrosion of stainless steels, it might need a trial and errors approach in each case.     

Impact of the surface roughness of AISI 316L stainless steel on biofilm adhesion in a seawater-cooled tubular heat exchanger-condenser

The present study evaluated biofilm growth in AISI 316L stainless steel tubes for seawater-cooled exchanger-condensers that had four different arithmetic mean surface roughness values ranging from 0.14 μm to 1.2 μm. The results of fluid frictional resistance and heat transfer resistance regarding biofilm formation in the roughest surface showed increases of 28.2% and 19.1% respectively, compared with the smoothest surface. The biofilm thickness taken at the end of the experiment showed variations of up to 74% between the smoothest and roughest surfaces. The thermal efficiency of the heat transfer process in the tube with the roughest surface was 17.4% greater than that in the tube with the smoothest surface. The results suggest that the finish of the inner surfaces of the tubes in heat exchanger-condensers is critical for improving energy efficiency and avoiding biofilm adhesion. This may be utilised to reduce biofilm adhesion and growth in the design of heat exchanger-condensers.