MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

Effects of delayed mating on preimplantation embryos in spontaneously ovulated mice

The effects of delayed mating on mouse preimplantation embryos (78 ± 1 hours) were studied by setting up different mating periods in relation to the estimated time of spontaneous ovulation. Copulation occurred even in the late morning and early afternoon after the night of spontaneous ovulation. However, females mated in the early afternoon had no viable embryos at the time of laparotomy. Although embryonic development was not affected in the groups mated 6 or 10 hours after estimated ovulation, the percentage of degenerated embryos was increased in these groups. These results suggest that prolonged intervals between the estimated time of ovulation and mating have some deleterious effects on preimplantation embryos.     

Defect of Fe-S cluster binding by DNA polymerase δ in yeast suppresses UV-induced mutagenesis,but enhances DNA polymerase ζ – dependent spontaneous mutagenesis

Eukaryotic genomes are duplicated by a complex machinery, utilizing high fidelity replicative B-family DNA polymerases (pols) α, δ and ε. Specialized error-prone pol ζ, the fourth B-family member, is recruited when DNA synthesis by the accurate trio is impeded by replication stress or DNA damage. The damage tolerance mechanism dependent on pol ζ prevents DNA/genome instability and cell death at the expense of increased mutation rates. The pol switches occurring during this specialized replication are not fully understood. The loss of pol ζ results in the absence of induced mutagenesis and suppression of spontaneous mutagenesis. Disruption of the Fe-S cluster motif that abolish the interaction of the C-terminal domain (CTD) of the catalytic subunit of pol ζ with its accessory subunits, which are shared with pol δ, leads to a similar defect in induced mutagenesis. Intriguingly, the pol3-13 mutation that affects the Fe-S cluster in the CTD of the catalytic subunit of pol δ also leads to defective induced mutagenesis, suggesting the possibility that Fe-S clusters are essential for the pol switches during replication of damaged DNA. We confirmed that yeast strains with the pol3-13 mutation are UV-sensitive and defective in UV-induced mutagenesis. However, they have increased spontaneous mutation rates. We found that this increase is dependent on functional pol ζ. In the pol3-13 mutant strain with defective pol δ, there is a sharp increase in transversions and complex mutations, which require functional pol ζ, and an increase in the occurrence of large deletions, whose size is controlled by pol ζ. Therefore, the pol3-13 mutation abrogates pol ζ-dependent induced mutagenesis, but allows for pol ζ recruitment for the generation of spontaneous mutations and prevention of larger deletions. These results reveal differential control of the two major types of pol ζ-dependent mutagenesis by the Fe-S cluster present in replicative pol δ.     

Decision Support through Mass and Energy Flow Management in the Vehicle-Refinishing Sector

In the past few decades, major advances in environmental protection within the coating application industry have been made. In spite of this technological progress, approximately 50% of industrial-solvent emissions still come from the paint-application sector. The advances made in reducing emissions for plants requiring licensing have unfortunately had no influence on the environmental efforts of smaller companies. Solvent-reduced painting systems, such as high-solid paints, water-based coating, and powder coating have not been able to achieve acceptance, nor have innovative application technologies. The principal arguments against a conversion to these ecologically more favorable alternatives were related to cost and quality.
Recently, the EU Solvent Directive (1999/13/EC) went into effect, aiming to significantly reduce industrial-solvent emissions. Up until this point, however, instruments enabling smaller companies to determine their solvent emissions and to simultaneously develop process-improvement potentials while keeping costs in mind have been missing.
Using the mass and energy flow-management approach, cost structures and environmental benefits can be made transparent to the entrepreneur. The primary result of the research projects presented here is the computer-based mass and energy flow model called the individual computer-aided mass and energy flow model for the vehicle-refinishing sector (IMPROVE). It can be used as a detailed business-consultancy tool. Based upon this, practical guidelines were developed for easy orientation and activity planning. They can be used by companies to help them fulfill the requirements of environmental legislation and to display the benefits that can be achieved by various emission-reduction measures.     

Application of PIXE analysis to the study of the regional distribution of trace elements in normal human brain

A particle-induced X-ray emission (PIXE) analysis method is presented, which allows measurement of eight elements (i.e., K, Ca, Mn, Fe, Cu, Zn, Se, and Rb) in human brain samples of only a few mg dry weight. The precision and accuracy of the method were investigated by analyzing animal brain matter with both PIXE and instrumental neutron activation analysis (INAA). The method was applied to measure the 8 elements in 46 different regions of 3 human brains. The sections analyzed originated from either the left or the right cerebral hemisphere, brain stem, and cerebellum. For one of the brains, sections were also analyzed from 26 corresponding regions of both hemispheres. For all elements, similar concentrations were found in the corresponding areas of the left and right sides of the brain. The concentrations (in μg/g dry weight) of the elements K, Fe, Cu, Zn, Se, and Rb were consistently higher in cortical structures than in white matter. Deep nuclei and brain stem, which have a mixed composition, showed intermediate values for K, Zn, Se, and Rb. A hierarchical cluster analysis indicated that the various brain regions clustered into two large groups, one comprising gray and mixed matter regions and the other, white and mixed matter brain areas.     

Turnover of Brain Monoamine Oxidase Measured In Vivo by Positron Emission Tomography Using l-[11C]Deprenyl

The distribution of carbon-11-labeled L-deprenyl, an irreversible inhibitor of monoamine oxidase type B (MAO-B), was determined in the baboon brain by positron emission tomography. The irreversible blood-to-brain transfer constant (influx constant, K_i) was measured using a complete metabolite-corrected arterial plasma concentration curve. This influx constant was used as a measure of functional enzyme activity for sequential determinations of MAO-B recovery following a single high dose of unlabeled l -deprenyl. The half-life for turnover of MAO-B was thus determined to be 30 days. Using appropriate irreversible inhibitors, this procedure should be generally useful for determining enzyme turnover rates in any organ in vivo and can be applied to some human studies as well.     

Comparison of the effect of excessive light on chlorophyll fluorescence (77K) and photon yield of O2 evolution in leaves of higher plants

High-light treatments (1750–2000 mol photons m^–2 · s^–1) of leaves from a number of higher-plant species invariably resulted in quenching of the maximum 77K chlorophyll fluorescence at both 692 and 734 nm (F _M, 692 and F _M, 734). The response of instantaneous fluorescence at 692 nm (F _O, 692) was complex. In leaves of some species F _O, 692 increased dramatically in others it was quenched, and in others yet it showed no marked, consistent change. Regardless of the response of F _O, 692 an apparently linear relationship was obtained between the ratio of variable to maximum fluorescence (F _V/F _M, 692) and the photon yield of O₂ evolution, indicating that photoinhibition affects these two variables to approximately the same extent. Treatment of leaves in a CO₂–free gas stream containing 2% O₂ and 98% N₂ under weak light (100 mol · m^–2 · s^–1) resulted in a general and fully reversible quenching of 77K fluorescence at 692 and 734 nm. In this case both F _O, 692 and F _M, 692 were invariably quenched, indicating that the quenching was caused by an increased non-radiative energy dissipation in the pigment bed. We propose that high-light treatments can have at least two different, concurrent effects on 77K fluorescence in leaves. One results from damage to the photosystem II (PSII) reaction-center complex and leads to a rise in F _O, 692; the other results from an increased non-radiative energy dissipation and leads to quenching of both F _O, 692 and F _M, 692 This general quenching had a much longer relaxation time than reported for pH-dependent quenching in algae and chloroplasts. Sun leaves, whose F _V/F _M, 692 ratios were little affected by high-light exposure in normal air, suffered pronounced photoinhibition when the exposure was made under conditions that prevent photosynthetic gas exchange (2% O₂, 0% CO₂). However, they were still less susceptible than shade leaves, indicating that the higher capacity for energy dissipation via photosynthesis is not the only cause of their lower susceptibility. The rate constant for recovery from photoinhibition was much higher in mature sun leaves than in mature shade leaves, indicating that differences in the capacity for continuous repair may in part account for the difference in their susceptibility to photoinhibition.Abbreviations and symbols kDa kilodalton - LHC-II light-harvesting chlorophyll-protein complex - PFD photon flux density (photon fluence rate) - PSI, PSII photosystem I, II - F _O, F _M, F _V instantaneous, maximum, variable fluorescence emission - absorptance - _a photon yield of O₂ evolution (absorbed light) C.I.W.-D.P.B. Publication No. 925     

Interaction between nitrogen and photon flux density in birch seedlings at steady-state nutrition

Birch ( Betula pendula Roth.) was investigated under steady-state nutrition and growth at different incident photon flux densities (PFD) and different relative addition rates of nitrogen. PFD had a strong influence on the relative growth rate at optimum nutrition and on the nitrogen productivity (growth rate per unit of nitrogen) but little effect on the formal relationships between nitrogen and growth, i.e. PFD and nitrogen nutrition are orthogonal growth factors. At a given suboptimum nitrogen (the same distance from optimum), increased PFD increased the relative growth rate and, therefore, the relative uptake rate and the required relative addition rate in accordance with the theoretical equality between these three parameters at steady-state nutrition. Correspondingly, at a given suboptimum relative addition rate, increased PFD decreased nitrogen status (larger distance from optimum) at an unchanged relative growth rate. Nutrient uptake rate, dry matter content, and partitioning of biomass and nutrients are strongly influenced by nitrogen status. PFD influences these characteristics, but only to an extent corresponding to its effect on the nitrogen status. The influence of PDF on the relative growth rate at optimum and on nitrogen productivity is well described by hyperbolic relationships, similar to reported PFD/photosynthesis relationships. These expressions for plant growth as well as the productivities of leaf area and quantum appear to be valuable characteristics of plant responses to light and nutrition. Although the calculated PFD/growth relationships indicate saturation at high values of PFD, a more realistic estimate of PFD at which saturation occurs is about 30 mol m⁻² day⁻¹, where the highest relative growth rate and nitrogen productivity were experimentally determined. No significant effect was observed because of day length differences between the present and previous experiments.