Regulatory Network of the Initiation of Chromosomal Replication in Escherichia coli

ABSTRACT

The bacterial chromosome is replicated once during the division cycle, a process ensured by the tight regulation of initiation at oriC. In prokaryotes, the initiator protein DnaA plays an essential role at the initiation step, and feedback control is critical in regulating initiation. Three systems have been identified that exert feedback control in Escherichia coli, all of which are necessary for tight strict regulation of the initiation step. In particular, the ATP-dependent control of DnaA activity is essential. A missing link in initiator activity regulation has been identified, facilitating analysis of the reaction mechanism. Furthermore, key components of this regulatory network have also been described. Because the eukaryotic initiator complex, ORC, is also regulated by ATP, the bacterial system provides an important model for understanding initiation in eukaryotes. This review summarizes recent studies on the regulation of initiator activity.     

Architecture of the Pol III–clamp–exonuclease complex reveals key roles of the exonuclease subunit in processive DNA synthesis and repair

DNA polymerase III (Pol III) is the catalytic α subunit of the bacterial DNA Polymerase III holoenzyme. To reach maximum activity, Pol III binds to the DNA sliding clamp β and the exonuclease ε that provide processivity and proofreading, respectively. Here, we characterize the architecture of the Pol III–clamp–exonuclease complex by chemical crosslinking combined with mass spectrometry and biochemical methods, providing the first structural view of the trimeric complex. Our analysis reveals that the exonuclease is sandwiched between the polymerase and clamp and enhances the binding between the two proteins by providing a second, indirect, interaction between the polymerase and clamp. In addition, we show that the exonuclease binds the clamp via the canonical binding pocket and thus prevents binding of the translesion DNA polymerase IV to the clamp, providing a novel insight into the mechanism by which the replication machinery can switch between replication, proofreading, and translesion synthesis.     

Fitness implications of seasonal climate variation in Columbian ground squirrels

The influence of climate change on the fitness of wild populations is often studied in the context of the spring onset of the reproductive season. This focus is relevant for climate influences on reproductive success, but neglects other fitness‐relevant periods (e.g., autumn preparation for overwintering). We examined variation in climate variables (temperature, rainfall, snowfall, and snowpack) across the full annual cycle of Columbian ground squirrels (Urocitellus columbianus) for 21 years. We investigated seasonal climate variables that were associated with fitness variables, climate variables that exhibited directional changes across the study period, and finally observed declines in fitness (?0.03 units/year; total decline = 37%) that were associated with directional changes in climate variables. Annual fitness of adult female ground squirrels was positively associated with spring temperature (r = 0.69) and early summer rainfall (r = 0.56) and negatively associated with spring snow conditions (r = ?0.44 to ?0.66). Across the 21 years, spring snowmelt has become significantly delayed (r = 0.48) and summer rainfall became significantly reduced (r = ?0.53). Using a standardized partial regression model, we found that directional changes in the timing of spring snowmelt and early summer rainfall (i.e., progressively drier summers) had moderate influences on annual fitness, with the latter statistically significant (ρ = ?0.314 and 0.437, respectively). The summer period corresponds to prehibernation fattening of young and adult ground squirrels. Had we focused on a single point in time (viz. the onset of the breeding season), we would have underestimated the influences of climate change on our population. Rather, we obtained a comprehensive understanding of the influences of climate change on individual fitness by investigating the full lifecycle.     

Mechanisms for nucleosome mobilization

Nucleosomes are the ubiquitous and fundamental packaging for eukaryotic genomes, and are the substrate for many processes in the nucleus. Nucleosomes are not static entities but can readily be moved by thermal energy and ATP-dependent chromatin remodeling complexes in a process known as sliding or shifting. We summarize from a mechanical perspective the twist defect and bulge diffusion mechanisms proposed as the most likely pathway for nucleosome mobilization. We then consider the elastic properties of DNA and how this affects the potential for each mechanism, concentrating on kinetic aspects of twist diffusion and possible planar bulge sizes and summarize the experimental evidence reflecting on each. Either, or both, mechanisms could occur, and careful experimentation focusing on their uniquely distinguishing features will be required to determine their relative contributions to chromatin dynamics.     

Motor apparatus in human spermatozoa that lack central pair microtubules

Electron microscopic examination of the spermatozoa from a man suffering from asthenozoospermia (poor or low sperm motility) showed that approximately 92% of the sperm flagella lacked central pair microtubules but possessed dynein arms and radial spokes while a small percentage of the spermatozoa had complete flagella. The characteristics of the motor apparatus of the spermatozoa and the effects of caffeine on the sperm motility were examined, as were the reactivation of demembranated spermatozoa and the sliding of doublet microtubules. Almost all spermatozoa were immotile in a Tyrode solution while only a small percentage of spermatozoa showed slow forward movement or feeble flagellar vibration, whereas addition of caffeine to the sperm suspension induced forward swimming of approximately half of the spermatozoa. The reactivation of demembranated spermatozoa with MgATP(2-) could not succeed because of disintegration of the demembranated flagella. However, when the demembranated spermatozoa were exposed to MgATP(2-) and then treated with elastase, the microtubular doublets of approximately half the number of the flagella slid from the end or middle of the flagella. These results suggest that the motor apparatus in the sperm flagella that lack the central pair microtubules is functionally assembled and intrinsically capable of undergoing flagellar movement but not strong enough to beat normally.     

Steady-state force–velocity relation of ATP-dependent sliding between slime mold myosin, arranged on paramyosin filaments, and algal cell actin cables

To investigate characteristics of ATP-dependent sliding of a non-muscle cell myosin, obtained from a cellular slime mold Dictyostelium discoideum, on actin filament, we prepared hybrid thick filaments, in which Dictyostelium myosin was regularly arranged around paramyosin filaments obtained from a molluscan smooth muscle. A single to a few hybrid filaments were attached to a polystyrene bead (diameter, 4.5 μm; specific gravity, 1.5), and the filaments were made to slide on actin filament arrays (actin cables) in the internodal cell of an alga Chara corallina, mounted on the rotor of a centrifuge microscope. The filament-attached bead was observed to move with a constant velocity under a constant external load for many seconds. The steady-state force–velocity relation of Dictyostelium myosin sliding on actin cables was hyperbolic in shape except for large loads ≤0.7–0.8 P₀, being qualitatively similar to that of skeletal muscle fibres, despite a considerable variation in the number of myosin molecules interacting with actin cables. Comparison of the P–V curves between Dictyostelium myosin and muscle myosins sliding on actin cables suggests that the time of attachment to actin in a single attachment–detachment cycle is much longer in Dictyostelium myosin than in muscle myosins.     

KaKs_Calculator 2.0： A Toolkit Incorporating Gamma-Series Methods and Sliding Window Strategies

We present an integrated stand-alone software package named KaKs_Calculator 2.0 as an updated version.It incorporates 17 methods for the calculation of nonsynonymous and synonymous substitution rates;among them,we added our modified versions of several widely used methods as the gamma series including γ-NG,γ-LWL,γ-MLWL,γ-LPB,γ-MLPB,γ-YN and γ-MYN,which have been demonstrated to perform better under certain conditions than their original forms and are not implemented in the previous version.The package is readily used for the identification of positively selected sites based on a sliding window across the sequences of interests in 5' to 3' direction of protein-coding sequences,and have improved the overall performance on sequence analysis for evolution studies.A toolbox,including C++ and Java source code and executable files on both Windows and Linux platforms together with a user instruction,is downloadable from the website for academic purpose at https://sourceforge.net/projects/kakscalculator2/.     

FIND:从下一代单端测序数据中快速查找Indel的方法

目的:针对下一代测序数据,尤其是单端测序数据,研究快速、准确查找Indel的方法。方法:先与全基因组参考序列进行快速比对,筛选出包含Indel的序列;再对这些序列进行双向的二次比对,确定Indel长度;最后借助长度信息在锁定范围内查找Indel的确切位置和相关信息。结果:本文成功构建FIND(Fast INDel detection system)系统,用于从单端测序数据中查找Indel信息。以模拟测序数据作为测试数据,在12X测试数据情况下,FIND的灵敏度和特异性分别为87.71%和99.66%,而且该性能还随着测序倍数的增加而提升。结论:充分利用比对过程获取的信息,在确定Indle长度的同时也确定出其大致位置,最终在局部范围内实现对单端测序数据中Indle的快速而准确的查找。     

A globin gene of ancient evolutionary origin in lower vertebrates: evidence for two distinct globin families in animals

Hemoglobin, myoglobin, neuroglobin, and cytoglobin are four types of vertebrate globins with distinct tissue distributions and functions. Here, we report the identification of a fifth and novel globin gene from fish and amphibians, which has apparently been lost in the evolution of higher vertebrates (Amniota). Because its function is presently unknown, we tentatively call it globin X (GbX). Globin X sequences were obtained from three fish species, the zebrafish Danio rerio, the goldfish Carassius auratus, and the pufferfish Tetraodon nigroviridis, and the clawed frog Silurana tropicalis. Globin X sequences are distinct from vertebrate hemoglobins, myoglobins, neuroglobins, and cytoglobins. Globin X displays the highest identity scores with neuroglobin (approximately 26% to 35%), although it is not a neuronal protein, as revealed by RT-PCR experiments on goldfish RNA from various tissues. The distal ligand-binding and the proximal heme-binding histidines (E7 and F8), as well as the conserved phenylalanine CD1 are present in the globin X sequences, but because of extensions at the N-terminal and C-terminal, the globin X proteins are longer than the typical eight alpha-helical globins and comprise about 200 amino acids. In addition to the conserved globin introns at helix positions B12.2 and G7.0, the globin X genes contain two introns in E10.2 and H10.0. The intron in E10.2 is shifted by 1 bp in respect to the vertebrate neuroglobin gene (E11.0), providing possible evidence for an intron sliding event. Phylogenetic analyses confirm an ancient evolutionary relationship of globin X with neuroglobin and suggest the existence of two distinct globin types in the last common ancestor of Protostomia and Deuterostomia.