Co(II)‐salen catalyzed stereoselective cyclopropanation of fluorinated styrenes

Three cis‐selective Co(II)‐salen complexes have been developed for the asymmetric cyclopropanation of para‐fluorinated styrenes with ethyl diazoacetate. Increasing the steric reach of the C₂‐symmetric ligand side chains improved the enantiomeric ratio of the reaction from 28:1 to 66:1. The methodology was exemplified by the gram‐scale synthesis of a lead compound for the treatment of castration‐resistant prostate cancer (CRPC), as well as a structurally related analog.     

Electronic and steric effects in cobalt Schiff bases complexes: Synthesis, characterization and catalytic activity of some cobalt(II) tetra-halogens-dimethyl salen complexes

The synthesis, characterization and catalytic activity of a series of tetra-halogeno-dimethyl salen cobalt (II) complexes are reported in this paper. The investigated complexes of cobalt (II) with Schiff bases are: αα′-di-methyl Salen cobalt (II) [Co(dMeSalen)], 3,3′,5,5′-tetra chloro α,α′-di-methyl Salen cobalt (II), [Co(tCldMeSalen)], 3,3′-di-bromo 5,5′-di-chloro α,α′-di-methyl Salen cobalt (II), [Co(tBrdMeSalen)], 3,3′,5,5′-tetra bromo α,α′-di-methyl Salen cobalt (II), [Co(tBrdMeSalen)] and 3,3′,5,5′-tetra iodo α,α′-di-methyl Salen cobalt (II), [Co(tIdMeSalen)] (where Salen is bis(salicylaldehyde)ethylenediamine). The characterization of the complexes was performed by elemental analysis, cyclic voltammetry, UV-Vis, IR and EPR spectroscopies. The study was made in DMF, and pyridine was used for coordination as axial base. The redox potential is influenced by the substituent grafted on aromatic ring and in the azomethynic position and also by the molecules coordinating in axial position (solvent, DMF, or pyridine). The catalytic oxygenation of 2,6-di-tert-butylphenol by these complexes leads to the obtention of benzoquinone and diphenoquinone products. The cobalt (II) complexes form reversible adducts with molecular oxygen.     

Enantioselective phenylacetylene addition to aldehydes and ketones catalyzed by recyclable polymeric Zn(salen) complex

New polymeric Zn(salen) complex was employed in the enantioselective phenylacetylene addition to aldehydes and ketones to produce corresponding chiral secondary propargylic alcohols with yields (up to 96%) and enantioselectivity (up to 72%) and tertiary propargylic alcohols with yields (up to 79%) and enantioselectivity (up to 68%) at room temperature, with added advantage of four times reuse with retention of enantioselectivity.     

Chiral recyclable dimeric and polymeric Cr(III) salen complexes catalyzed aminolytic kinetic resolution of trans-aromatic epoxides under microwave irradiation

Aminolytic kinetic resolution (AKR) of trans-stilbene oxide and trans-beta-methyl styrene oxide proceeded smoothly under microwave irradiation using chiral dimeric and polymeric Cr(III) salen complexes as efficient catalysts, giving regio-, diastereo-, and enantioselective anti-beta-amino alcohols in high yields (49%) and chiral purity (ee up to 94%) in case of 4-methylaniline within 2 min. The kinetic resolution system is approximately five times faster than traditional oil bath heating at 70 degrees C and 420 times faster than the reaction conducted at room temperature with concomitant recovery of respective chirally enriched epoxides (ee, 92%) in excellent yields (up to 48%). The catalyst 1 worked well in terms of enantioselectivity than the catalyst 2, but both the catalysts were easily recovered and reused five times with the retention of its efficiency.     

Asymmetric alkene epoxidation by Mn(III)salen catalyst in ionic liquids

The enantioselective epoxidation of 6-cyano-2,2-dimethylchromene (Chrom) catalysed by the Jacobsen catalyst, using sodium hypochlorite (NaOCl) as oxygen source, at room temperature, was performed in a series of 1,3-dialkylimidazolium and tetra-alkyl-dimethylguanidium based ionic liquids. All the room temperature ionic liquids (RTILs) could be used as reaction media for the enantioselective epoxidation of the alkene giving, generally, moderate to good epoxide yields and enantiomeric excesses (ee%).For the series of ionic liquids derived from the 1,3-dialkylimidazolium cation, it was observed some relationship between the RTILs physical properties and the catalytic reaction parameters, exemplified by linear correlations between (i) the ee% and the α Kamlet-Taft parameter (hydrogen bond acidity of the solvent) for CH₂Cl₂ and [C₄m_nim][BF₄] ionic liquids (n = 1 or 2), and (ii) the ee% and the β Kamlet-Taft parameter (hydrogen bond basicity of the solvent) for CH₂Cl₂ and [C₄mim][X] ionic liquids (X = PF₆, NTf₂ or BF₄).All the RTILs could be reused in further catalytic cycles, with the exception of [C₈mim][PF₆]. The reutilisation of the Jacobsen catalyst for four times generally led to a decrease in the epoxide yield and to a slight decrease in the enantioselectivity. The recycling of the catalyst could be improved by imparting an ionic character to the complex through abstraction of the axially coordinated chloride anion (Cat 2). Other oxygen sources, such as iodosylbenzene, hydrogen peroxide and urea-hydrogen peroxide adduct, were also tested coupled with Jacobsen catalyst, but the best results were achieved with NaOCl.     

Circular Dichroism Sensing of Chiral Compounds Using an Achiral Metal Complex as Probe

Coordination of a chiral substrate to (meso‐salen)cobalt(II) nitrate and subsequent oxidation generates a Co(III) complex exhibiting a strong chiroptical readout that is attributed to spontaneous substrate‐to‐ligand chirality imprinting. The characteristic circular dichroism (CD) response of the (salen)cobalt complex can be used for enantiomeric analysis of a variety of chiral substrates based on a simple CD measurement at low concentration and without additional purification steps. This chirality sensing approach has potential for high‐throughput enantiomeric excess (ee) screening applications and minimizes solvent waste production. Chirality 26:379–384, 2014. © 2014 Wiley Periodicals, Inc.     

A chemiluminescence method to detect hydroquinone with water‐soluble sulphonato‐(salen)manganese(III) complex as catalyst

A water‐soluble sulphonato‐(salen)manganese(III) complex with excellent catalytic properties was synthesized and demonstrated to greatly enhance the chemiluminescence signal of the hydrogen peroxide ? luminol reaction. Coupled with flow‐injection technique, a simple and sensitive chemiluminescence method was first developed to detect hydroquinone based on the chemiluminescence system of the hydrogen peroxide–luminol–sulphonato‐(salen)manganese(III) complex. Under optimal conditions, the assay exhibited a wide linear range from 0.1 to 10 ng mL^–1 with a detection limit of 0.05 ng mL^–1 for hydroquinone. The method was applied successfully to detect hydroquinone in tap‐water and mineral‐water, with a sampling frequency of 120 times per hour. The relative standard deviation for determination of hydroquinone was less than 5.6%, and the recoveries ranged from 96.8 to 103.0%. The ultraviolet spectra, chemiluminescence spectra, and the reaction kinetics for the peroxide–luminol–sulphonato‐(salen)manganese(III) complex system were employed to study the possible chemiluminescence mechanism. The proposed chemiluminescence analysis technique is rapid and sensitive, with low cost, and could be easily extended and applied to other compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and structural characterization of iron(III) salen complexes possessing appended anionic oxygen donor ligands

The synthesis and solid-state characterization of iron(III) salen complexes bearing monodentate and bidentate anionic oxygen donor ligands are reported. The synthesis of Fe(salen)OPh (OPh=2,6-diphenylphenoxide) (1) was accomplished using Fe[N(Si(CH₃)₃)₂]₃ with one equivalent of H₂salen and the corresponding phenol. The complex was isolated as a crystalline sample by the slow diffusion of pentane into a concentrated solution of 1 at −20 °C. The solid-state structure of complex 1 reveals distorted square pyramidal geometry about the iron metal center. Alternatively the preparation of Fe(salen) complex 2 bearing the anionic, bidentate acetylacetonate ligand in the axial position was accomplished by thermally replacing two acetylacetonate ligands in Fe(acac)₃ with one equivalent of H₂salen. The complex was isolated and crystallographically characterized using X-ray quality crystals formed via the aforementioned protocol. The metal center adopts a very distorted octahedral geometry, indicating a preference for the square pyramidal species which is typical of other iron salen derivatives. Unfortunately, 1 and 2 were found to be inactive in the copolymerization of CO₂ and cyclohexene oxide to afford polycarbonate in the presence of a Lewis base (i.e., N-MeIm and PCy₃). The μ-[Fe(salen)]₂O (3) derivative was also isolated via the protonation of Fe(salen)(N(Si(CH₃)₃)₂). The complex is relatively air stable, forming large, dark crystals over a short period of time at −20 °C. The solid-state structure reveals a nearly linear Fe-O-Fe bond angle, which is due to the electronic repulsions associated with the sterically encumbering tert-butyl groups on the salen framework.     

Synthesis,Structural Characterization,and Chiroptical Studies of Bidentate Salen‐Type Lanthanide (III) Complexes

The salen‐type ligand prepared with (R,R) diphenylethan‐1,2‐diamine and salicylaldehyde provides stable and inert complexes KLnL₂ upon simple reaction with lanthanide halides or pseudohalides LnX₃ (Ln = Tb³⁺‐Lu³⁺; X = Cl^? or TfO^?) of its potassium salt. All the complexes were completely characterized through nuclear magnetic resonance (NMR), electronic circular dichroism (ECD) in the UV and some (Er³⁺, Tm³⁺, Yb³⁺) also with Near‐IR ECD (NIR‐ECD) and luminescence (Tb³⁺, Tm³⁺). Careful analysis of the NMR shifts demonstrated that the complexes are isostructural in solution and afforded an accurate geometry. This was further confirmed by means of Density Functional Theory (DFT) optimization of the Lu³⁺ complex, and by comparing the ligand‐centered experimental and time‐dependent TD‐DFT computed UV‐ECD spectra. As final validation, we used the NIR‐ECD spectrum of the Yb³⁺ derivative calculated by means of Richardson's equations. The excellent match between calculated and experimental ECD spectra confirm the quality of the NMR structure.  Chirality 27:857–863, 2015. © 2015 Wiley Periodicals, Inc.     

Advances in asymmetric oxidative kinetic resolution of racemic secondary alcohols catalyzed by chiral Mn(III) salen complexes

Enantiomerically pure secondary alcohols are essential compounds in organic synthesis and are used as chiral auxiliaries and synthetic intermediates in the pharmaceutical, agrochemical, and fine chemical industries. One of the attractive and practical approaches to achieving optically pure secondary alcohols is oxidative kinetic resolution of racemic secondary alcohols using chiral Mn(III) salen complexes. In the last decade, several chiral Mn(III) salen complexes have been reported with excellent enantioselectivity and activity in the homogeneous and heterogeneous catalysis of the oxidative kinetic resolution of racemic secondary alcohols. This review article is an overview of the literature on the recent development of chiral Mn(III) salen complexes for oxidative kinetic resolution of racemic secondary alcohols. The catalytic activity of monomeric, dimeric, macrocyclic, polymeric, and silica/resin supported chiral Mn(III) salen complexes is discussed in detail.