Two centuries of growth among Czech children and youth

The trend of increasing height can be interpreted as a reflection of the unfolding progress of civilization. Height changes among children and adolescents are good markers of this trend. We analyze the secular trend in the heights of children and adolescents in the Czech Republic on the basis of data from anthropological surveys. The earliest height data pertain to Czech youths who attended the Military Schools in Austria in 1800-1809. Data also exist for 1895 and continue in 1951 and at 10-year intervals thereafter. Growth curves were obtained for separate age groups by fitting mean values via third-order polynomial smoothing splines. Between 1951 and 2001, the mean heights of boys and girls aged 2.5 years increased by 2.7 and 3 cm, respectively. Since 1895, the mean height of 13-year-old boys has increased by 19.4 cm, and the mean height of girls has increased by 18.3 cm.     

Insolubility of Cr2O3 in Bioaccessibility Tests Points to Requirement for a New Human Oral Reference Dose for Trivalent Chromium

Bioaccessibility measurements have the potential to improve the accuracy of risk assessments and reduce the potential costs of remediation when they reveal that the solubility of chemicals in a matrix (e.g., soil) differs markedly from that in the critical toxicity study (i.e., the key study from which a toxicological or toxicity reference value is derived). We aimed to apply this approach to a brownfield site contaminated with chromium, and found that the speciation was Cr^III, using a combination of alkaline digestion/diphenylcarbazide complexation and X-ray absorption near edge structure analysis. The bioaccessibility of Cr₂O₃, the compound on which a reference dose for Cr^III is based, was substantially lower (<0.1%) than that of the Cr^III in the soils, which was a maximum of 9%, giving relative bioaccessibility values of 13,000% in soil. This shows that the reference dose is based on essentially an insoluble compound, and thus we suggest that other compounds be considered for toxicity testing and derivation of reference dose. Two possibilities are CrCl₃·6H₂O and KCr(SO₄)₂·12H₂O, which have been used for derivation of ecological toxicity reference values and are soluble at a range of dosing levels in our bioaccessibility tests.     

DIA-Based Proteomics Identifies IDH2 as a Targetable Regulator of Acquired Drug Resistance in Chronic Myeloid Leukemia

Drug resistance is a critical obstacle to effective treatment in patients with chronic myeloid leukemia. To understand the underlying resistance mechanisms in response to imatinib mesylate (IMA) and adriamycin (ADR), the parental K562 cells were treated with low doses of IMA or ADR for 2 months to generate derivative cells with mild, intermediate, and severe resistance to the drugs as defined by their increasing resistance index. PulseDIA-based (DIA [data-independent acquisition]) quantitative proteomics was then employed to reveal the proteome changes in these resistant cells. In total, 7082 proteins from 98,232 peptides were identified and quantified from the dataset using four DIA software tools including OpenSWATH, Spectronaut, DIA-NN, and EncyclopeDIA. Sirtuin signaling pathway was found to be significantly enriched in both ADR-resistant and IMA-resistant K562 cells. In particular, isocitrate dehydrogenase (NADP(+)) 2 was identified as a potential drug target correlated with the drug resistance phenotype, and its inhibition by the antagonist AGI-6780 reversed the acquired resistance in K562 cells to either ADR or IMA. Together, our study has implicated isocitrate dehydrogenase (NADP(+)) 2 as a potential target that can be therapeutically leveraged to alleviate the drug resistance in K562 cells when treated with IMA and ADR.     

Haematological and biochemical reference intervals for farmed channel catfish

The reference intervals for biochemical variables and red blood cell indices of healthy intensively bred channel catfish Ictalurus punctatus were determined. The blood variables were determined using standardized clinical methods. The reference intervals (25th and 75th percentiles) were established using a non-parametric method. Reference intervals for plasma glucose, serum total protein, sodium, potassium, calcium, magnesium, chloride concentration, primary and secondary red blood cell indices were established. The haematological and biochemical reference intervals established may allow important clinical decisions about channel catfish.     

Scaling physiological measurements for individuals of different body size

This paper examines how selected physiological performance variables, such as maximal oxygen uptake, strength and power, might best be scaled for subject differences in body size. The apparent dilemma between using either ratio standards or a linear adjustment method to scale was investigated by considering how maximal oxygen uptake (l.min-1), peak and mean power output (W) might best be adjusted for differences in body mass (kg). A curvilinear power function model was shown to be theoretically, physiologically and empirically superior to the linear models. Based on the fitted power functions, the best method of scaling maximum oxygen uptake, peak and mean power output, required these variables to be divided by body mass, recorded in the units kg 2/3. Hence, the power function ratio standards (ml.kg-2/3.min-1) and (W.kg-2/3) were best able to describe a wide range of subjects in terms of their physiological capacity, i.e. their ability to utilise oxygen or record power maximally, independent of body size. The simple ratio standards (ml.kg-1.min-1) and (W.kg-1) were found to best describe the same subjects according to their performance capacities or ability to run which are highly dependent on body size. The appropriate model to explain the experimental design effects on such ratio standards was shown to be log-normal rather than normal. Simply by taking logarithms of the power function ratio standard, identical solutions for the design effects are obtained using either ANOVA or, by taking the unscaled physiological variable as the dependent variable and the body size variable as the covariate, ANCOVA methods.     

Determination of mercury in human serum and packed blood cells by neutron activation analysis

A method is described for the determination of mercury in human blood serum and packed blood cells employing neutron activation analysis. Great attention was devoted to the collection and manipulation of the samples. The accuracy and precision of the method were tested by analyzing biological reference materials and by comparing the concentrations measured in a number of serum samples to those obtained by another, independent technique (cold vapor atomic absorption spectrometry) in the same samples. The article reports the levels measured in blood serum and packed blood cells samples from 15 adult volunteers, as well as the figures determined in a “second-generation” biological reference material (freeze-dried human serum), prepared and conditioned at the University of Ghent.     

A new microcomputer-controlled neutron activation and analysis system

A microcomputer-controlled irradiation and measurement system and a microprocessor-controlled sample changer have been installed at the SLOWPOKE-2 Facility at the Royal Military College of Canada (RMC). These systems can provide the gamut of instrumental neutron activation analysis (INAA) techniques for the analyst. Custom software has been created for system control, data acquisition, and off-line spectral analysis using programs that incorporate Gaussian peak-fitting methods of analysis. The design and use of the equipment is discussed, and the performance is illustrated with results obtained from the analysis of marine sediment and biological reference materials.     

Plasma and erythrocyte manganese concentrations

This study was carried out to assess manganese (Mn) status after an acute episode of myocardial infarction. Plasma and erythrocyte Mn concentrations were measured from admission to hospital to day 15 postadmission in 21 patients suffering from acute myocardial infarction and in three control groups. The determination of Mn in these biological fluids was performed by electrothermal atomic absorption spectrometry. Plasma Mn was higher (p<0.01) and erythrocyte Mn was similar in the acute myocardial infarction group compared to healthy age-matched control group. Plasma and erythrocyte Mn remained unchanged during the 2 wk after acute myocardial infarction and were not correlated to enzyme activities. A decrease of erythrocyte Mn with age, expressed in nmol/L, was noted (p<0.02). These results suggest that plasma and erythrocyte Mn do not provide an indication of myocardial damage. Nonetheless, Mn status in elderly merits further attention.     

Comparison of European and US biological indicators for ethylene oxide sterilization

Summary Biological indicators (BIs) are used to monitor ethylene oxide (EO) gas sterilization processes for medical devices. Several European and United States BIs for EO sterilization were evaluated for resistance according to both United States Pharmacopeia (USP) XXI and United Kingdom's (UK) tests for D-values. US BIs areB. subtilis var. niger spores on paper strips or disc carriers while European BIs use aluminum strips, quartz sand, or cotton yarn. Numerous BIs per run and runs per lot, as well as 2–3 different lots of BIs from each manufacturer, were examined. Both British and US BIs met their respective label claims for rates of inactivation when tested against British and USP EO test parameters, respectively. However, Danish BIs, on cotton yarn or quartz sand, were not inactivated following USP specifications during the exposure dwell times tested (600 mg L^–1 EO, 54°C, 60% RH, 0–110 min). The Danish BIs will require further testing in order for us to determine if theirB. subtilis spores are unusually resistant to EO or if the spore carrier substrates protect the spores from the sterilizing gas. In conclusion, the British and American BIs for EO sterilization are equivalent in resistance despite differences in carrier substrate, recovery conditions, calculation methods for D-values, and the labeled sterilization conditions for use.