Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

Synthesis of alkali metal hexahydroaluminate complexes using dimethyl ether as a reaction medium

A novel method of preparation of hexahydroaluminate complexes M₃AlH₆ (M = Li, Na or K) from the corresponding alkali metal hydride and tetrahydroaluminate has been explored, using dimethyl ether (Me₂O) as a solvent at near-ambient temperatures. The results are compared with those obtained using a recently established mechanochemical approach. Characterization of the products by powder X-ray diffraction revealed M₃AlH₆ to be formed in high yield for M = Li and Na, but not for M = K. The attempted preparation of Li₂NaAlH₆ and Li₂KAlH₆ was unsuccessful.     

肝素钠的生产及其存在的问题及解决的方法（Ⅱ）

本文就粗品肝素钠生产的原料控制硬件设施管理和环保等方面进行了论述，介绍了一些改进的方法和措施，并就该方面的的一些问题进行了探讨，提出了解决的方法。     

Tungsten-based material as promising new lead-free gamma radiation shielding material in nuclear medicine

PurposeThe main objective of this study was to evaluate the efficacy of tungsten carbide as new lead-free radiation shielding material in nuclear medicine by evaluating the attenuation properties.Materials and methodsThe elemental composition of tungsten carbide was analysed using Field-Emission Scanning Electron Microscopy (FESEM) with energy dispersive X-ray (EDX). The purity of tungsten carbide was 99.9%, APS: 40–50 µm. Three discs of tungsten carbide was fabricated with thickness of 0.1 cm, 0.5 cm and 1.0 cm. Three lead discs with similar thickness were used to compare the attenuation properties with tungsten carbide discs. Energy calibration of gamma spectroscopy was performed by using ¹²³I, ¹³³Ba, ¹⁵²Eu, and ¹³⁷Cs. Gamma radiation from these sources were irradiated on both materials at energies ranging from 0.160 MeV to 0.779 MeV. The experimental attenuation coefficients of lead and tungsten carbide were compared with theoretical attenuation coefficients of both materials from NIST database. The half value layer and mean free path of both materials were also evaluated in this study.ResultsThis study found that the peaks obtained from gamma spectroscopy have linear relationship with all energies used in this study. The relative differences between the measured and theoretical mass attenuation coefficients are within 0.19–5.11% for both materials. Tungsten carbide has low half value layer and mean free path compared to lead for all thickness at different energies.ConclusionThis study shows that tungsten carbide has high potential to replace lead as new lead-free radiation shielding material in nuclear medicine.     

Dietary factors affecting the urinary mutagenicity assay system. I. Detection of mutagenic activity in human urine following a fried beef meal

Studies have been conducted to determine whether the mutagens in fried beef ingested by human subjects are excreted in the urine. Urine samples were collected from individuals on liquid or regular diets before and after a fried beef meal. The mutagenic activity of the samples was tested in the Ames Salmonella/microsome assay system. The results showed that in individuals on liquid diets, most of the urinary mutagenic activity is recovered within 2-6 h after consuming a fried beef meal. In one individual tested, mutagenic activity was found in urine samples obtained 6-15 h after the fried beef meal. No mutagenic activity was detected in any of the urine samples obtained 15-24 h following the meal. In individuals on a regular diet, however, mutagenic activity was frequently observed in urine samples obtained 16-24 h following the fried beef meal, although the mutagenic activity was not as great as that in the preceding 16 h. It appears that the mutagenic agents generated by the frying of beef are ingested, absorbed, and excreted by the human body in biologically detectable quantities. These results suggest that subjects should abstain from fried beef at least one day prior to and during urine mutagenicity screening.     

水蒸汽蒸馏巴柑檬叶和果皮精油化学成分的研究

巴柑檬是我们第一次从国外引种成功的一种名贵香料植物。用色谱-质谱-计算机联用技术、毛细管气相色谱保留指数法和标准品叠加法分析了水蒸汽蒸馏巴柑檬叶和果皮精油的化学成分。从叶和果皮精油分离出来的220个和200个成分中,分别鉴定出48个和57个成分。鉴定组分的含量分别占叶和果皮精油的99.80％和98.54％。叶精油与果皮精油在化学成分方面的主要区别是叶油中萜烃化合物含量较低,而萜醇类化合物含量较高。     

A new microcomputer-controlled neutron activation and analysis system

A microcomputer-controlled irradiation and measurement system and a microprocessor-controlled sample changer have been installed at the SLOWPOKE-2 Facility at the Royal Military College of Canada (RMC). These systems can provide the gamut of instrumental neutron activation analysis (INAA) techniques for the analyst. Custom software has been created for system control, data acquisition, and off-line spectral analysis using programs that incorporate Gaussian peak-fitting methods of analysis. The design and use of the equipment is discussed, and the performance is illustrated with results obtained from the analysis of marine sediment and biological reference materials.     

黄臀鹎禁食和夜间能量物质消耗的研究

本文报道分布于昆明地区的黄臀鹎Pycnonotus xanthorrhous在禁食和四季夜间能量物质——脂肪、蛋白质和糖的消耗情况。结果表明,在人为禁食条件下黄臀鹎的存活时间仅19小时,死亡时躯脂降低79％,去脂飞翔肌干重降低46％,肝糖降低96％。在夜间黄臀鹎消耗大量的储存脂肪,并以冬季的消耗量最大。肝糖提供的能量极少。在繁殖期和换羽期,储存的飞翔肌蛋白质在夜间大量分解以提供鸟体的需要。     

Fungal colonization of synthetic substrates for use in space craft

Summary Materials being used or considered for use in space flight were examined for their susceptibility to fungal colonization. The materials included soft goods (clothing) and insulation and fabrication products such as Velcro^® attachments and elastic cord binders. Materials were exposed for at least 28 days in a highhumidity chamber colonized with over 50 species of fungi, including those species recommended for determining recalcitrance of materials to fungal biodegradation. At least nine of 25 products demonstrated extensive microscopic colonization by fungi, mostly byAcremonium obclavatum. Challenge procedures that rely on observations with the unaided eye, or 40×magnification of growth by a restricted number of fungal species with a cellulosic substrate as a positive control, are insufficient for determining the resistance of synthetic substrates to fungal colonization.     

使用MUG培养基定量检测植物药中大肠杆菌时荧光猝灭现象的发生与克服方法

实验中观察到,用ＭＵＧ培养基对植物药中的大肠杆菌定量时多发生荧光猝灭现象,影响检测结果。本文对此现象产生的原因与克服方法进行了系统的考察,发现以一种简便的转接方法可排除植物药介质对菌检的干扰。该方法由两组检验系列构成,当怀疑正常稀释系列（第一系列）４０ｈ培养液的荧光结果可能因猝灭现象呈假阴性时,立即分别将该系列的１—３号管培养液以０．５ｍｌ的接种量转接入新鲜的ＭＵＧ培养基（第二系列）,重新培养２４ｈ,荧光猝灭现象即可克服。综合两系列的荧光、产气和吲哚三项生化特征得出检品中大肠杆菌含量。实际应用表明,此法能显著提高使用该培养基时菌检结果的可靠性。