Complementarity of particles and pits in freeze-fractured hepatic and cardiac gap junctions

Summary Particles and pits of freeze-fractured gap junctions are considered as complementary structures despite the frequent observations of more regular and closer spacings of pits, ascribed to plastic deformation of particle arrays. Recently, however, the noncomplementarity of pits and particles in Purkinje fibers has been reported. To ascertain the relationship between both structures, gap junctions from fixed, cryoprotected liver and myocardium were investigated using spacing and density measurements and complementary replicas.In hepatocyte gap junctions, the center-to-center distances (mean±sd) among pits, 9.57±1.49 nm, and particles, 9.70±1.77 nm, are not significantly different. Density determinations yielded a slightly higher value for the pits, (11,510±830)/m², than for the particles, (11,230±950)/m². In the myocardium, the spacing of the regularly arrayed pits, 9.55±1.33 nm barely exceeds the value of 9.44±1.62 nm for the particles, which show some clustering. However, the packing density for the pits, (10,090±740)/m², appears a little higher than that of the particles (9,890±920)/m². As density and spacing measurements provided no decisive answers, the positions of individual pits and particles of complementary junctional faces were recorded on transparent sheets and compared. In this fashion, a one-to-one correspondence between particles and pits could be established, while small discrepancies may be attributed to plastic deformation. Moreover, the collinearity of pits and particles may be suggested by the observation of a platinum grain in the center of many pits.     

The second life of terrestrial and plastic carbon as nutritionally valuable food for aquatic consumers

Primary production is the basis for energy and biomolecule flow in food webs. Nutritional importance of terrestrial and plastic carbon via mixotrophic algae to upper trophic level is poorly studied. We explored this question by analysing the contribution of osmo- and phagomixotrophic species in boreal lakes and used ¹³C-labelled materials and compound-specific isotopes to determine biochemical fate of carbon backbone of leaves, lignin–hemicellulose and polystyrene at four-trophic level experiment. Microbes prepared similar amounts of amino acids from leaves and lignin, but four times more membrane lipids from lignin than leaves, and much less from polystyrene. Mixotrophic algae (Cryptomonas sp.) upgraded simple fatty acids to essential omega-3 and omega-6 polyunsaturated fatty acids. Labelled amino and fatty acids became integral parts of cell membranes of zooplankton (Daphnia magna) and fish (Danio rerio). These results show that terrestrial and plastic carbon can provide backbones for essential biomolecules of mixotrophic algae and consumers at higher trophic levels.     

Observations on the biology of Leuciscus ‘svallize’ in the Kremasta reservoir (Greece)

The age, growth, feeding habits and reproductive biology of Leuciscus svallize in artificial lake Kremasta (Greece), are described. There is a considerable similarity in the feeding and reproductive characteristics between L. svallize and L. cephalus and also a similarity in the life span, growth patterns and age of maturation between L. svallize and some southern L. cephalus populations, which may suggest similar responses of closely related taxa to similar conditions.     

Mutagenic effect on L5178Y mouse lymphoma cells by growth in ethylene oxide-sterilized polycarbonate flasks

Summary The mutation frequency of L5178Y mouse lymphoma cells to resistance to 5′-bromo-2′-deoxyuridine increased 6-to 14-fold after growth in ethylene oxide-sterilized polycarbonate culture flasks compared to growth in glass flasks. No comparable increase was observed when L5178Y cells were growth in identical polycarbonate culture flasks sterilized by autoclaving.     

Immobilization of Rhizomucor miehei lipase onto montmorillonite K-10 and polyvinyl alcohol gel

Abstract

Immobilization of enzymes from different sources on various supports in designed systems increases enzymes’ stability by protecting the active site of it from undesired effect of reaction environment. Also, immobilization decreases the cost of separation and facilities the reuse of the enzymes. Therefore, the design of new immobilization enzyme preparations has been an inevitable area of modern biotechnology. Herein, Rhizomucor miehei lipase (RML) was immobilized on montmorillonite K-10 (MMT-RML) by adsorption and in polyvinyl alcohol (PVA-RML) by entrapment to obtain a more stable and active lipase preparation. The free and immobilized lipase preparations were characterized for p-nitrophenyl palmitate hydrolysis. The apparent Michaelis–Menten (K_mapp) constant was almost the same for the free RML and PVA-RML, whereas the corresponding value was 17.7-fold lower for MMT-RML. PVA-RML and MMT-RML have shown a 1.1 and 23.8 folds higher catalytic efficiency, respectively, than that of the free RML. The half-lives of PVA-RML and MMT-RML were found to be 7.4 and 3.4 times longer than the free RML at 35?°C, respectively. PVA-RML and MMT-RML maintained 65% and 87% of their initial activities after four reuses. These results showed that the catalytic performance of RML has improved significantly by immobilization.     

大兴安岭泥炭地不同菌根类型木本植物叶片凋落物分解及其温度敏感性差异

以我国大兴安岭多年冻土区泥炭地常见的3种外生菌根木本植物(细叶沼柳Salix rosmarinifolia、白桦Betula platyphylla和柴桦B.fruticosa)和4种欧石楠菌根木本植物(笃斯越桔Vaccinium uliginosum、狭叶杜香Ledum palustre、甸杜Chamaedaphne calyculata和小叶杜鹃Rhododendron parrifolum)为研究对象,通过315天培养试验测定10和20℃叶片凋落物分解过程中的碳(C)累积矿化量和重量损失,并分析其温度敏感性。结果表明:外生菌根植物叶片凋落物的C矿化量和重量损失在10和20℃均高于欧石楠菌根植物;外生菌根植物凋落物分解过程中C矿化量的温度敏感性系数高于欧石楠菌根植物,但重量损失的温度敏感性系数低于欧石楠菌根植物;在每一培养温度下,C矿化量和重量损失均与凋落物全氮(N)和全磷(P)浓度呈正相关,与C/N和C/P呈负相关;尽管C矿化量的温度敏感性系数与凋落物初始化学组成无显著相关性,但重量损失的温度敏感性系数与凋落物全N和全P浓度呈负相关,与C/N和C/P呈正相关。本研究结果为认识和预测气候变暖及其引起的物种组成变化对北方泥炭地植物凋落物分解的影响提供理论依据。     

Immobilization of Candida cylindracea lipase on poly lactic acid,polyvinyl alcohol and chitosan based ternary blend film: Characterization,activity, stability and its application for N-acylation reactions

The ecofriendly ternary blend polymer film was prepared from the chitosan (CH), polylactic acid (PLA) and polyvinyl alcohol (PVA). Immobilization of Candida cylindracea lipase (CCL) was carried out on ternary blend polymer via entrapment methodology. The ternary blend polymer and immobilized biocatalyst were characterized by using N₂ adsorption–desorption isotherm, SEM, FTIR, DSC, and (%) water content analysis through Karl Fischer technique. Biocatalyst was then subjected for the determination of practical immobilization yield, protein loading and specific activity. Immobilized biocatalyst was further applied for the determination of biocatalytic activity for N-acylation reactions. Various reaction parameters were studied such as effect of immobilization support (ratio of PLA:PVA:CH), molar ratio (dibutylamine:vinyl acetate), solvent, biocatalyst loading, time, temperature, and orbital speed rotation. The developed protocol was then applied for the N-acylation reactions to synthesize several industrially important acetamides with excellent yields. Interestingly, immobilized lipase showed fivefold higher catalytic activity and better thermal stability than the crude extract lipase CCL. Furthermore various kinetic and thermodynamic parameters were studied and the biocatalyst was efficiently recycled for four successive reuses. It is noteworthy to mention that immobilized biocatalyst was stable for period of 300 days.     

Fully Plastic Dye Solar Cell Devices by Low‐Temperature UV‐Irradiation of both the Mesoporous TiO2 Photo‐ and Platinized Counter‐Electrodes

The application of UV irradiation processes are successfully proposed for the first time in the fabrication of both of the two plastic electrodes in flexible dye solar cells (DSCs) and modules. For the realization of the photo‐electrode, a customized TiO₂ paste formulation and UV processing method was developed which yields 134% (48%) performance enhancement with respect to the same (binder‐free) paste treated at 120 °C. UV treatment induces both complete removal of organic media and more efficient charge collection. Significantly, highly catalytic platinized flexible counter‐electrodes are also obtained via UV photo‐induced reduction of screen‐printed platinum precursor pastes based on hexachloroplatinic acid. Using both UV‐processed electrodes, a fully plastic DSC is fabricated with a conversion efficiency of 4.3% under 1 Sun (semitransparent) and 5.3% under 0.2 Sun (opaque). Performance is within 10% of the efficiency of a glass‐based DSC prepared with the same materials but with conventional high temperature processes. The material formulations and processes are simple, and easily up‐scaled over large areas, even directly and simultaneously applicable to the preparation of both the photo‐and counter‐electrode on the same substrate which enabled us to demonstrate the first module on plastic realized with a W series interconnection.