Multifaceted applications of nanomaterials in cell engineering and therapy

Nanomaterials with superior physiochemical properties have been rapidly developed and integrated in every aspect of cell engineering and therapy for translating their great promise to clinical success. Here we demonstrate the multifaceted roles played by innovatively-designed nanomaterials in addressing key challenges in cell engineering and therapy such as cell isolation from heterogeneous cell population, cell instruction in vitro to enable desired functionalities, and targeted cell delivery to therapeutic sites for prompting tissue repair. The emerging trends in this interdisciplinary and dynamic field are also highlighted, where the nanomaterial-engineered cells constitute the basis for establishing in vitro disease model; and nanomaterial-based in situ cell engineering are accomplished directly within the native tissue in vivo. We will witness the increasing importance of nanomaterials in revolutionizing the concept and toolset of cell engineering and therapy which will enrich our scientific understanding of diseases and ultimately fulfill the therapeutic demand in clinical medicine.     

Stable sol-gel microstructured and microfluidic networks for protein patterning

We demonstrate the formation of micropatterned sol-gel structures containing active proteins by patterning with polydimethylsiloxane (PDMS) microchannels. To transport sol solution efficiently into the hydrophobic PDMS microchannels, a hydrophilic-hydrophobic block copolymer was used to impart hydrophilicity to the PDMS microchannels. Poor adhesion of the micropatterned gel structure onto glass slides was improved by treating the glass surface with a polymeric substrate. To minimize cracks in the gel microstructure, hybrid matrices of interpenetrating organic and inorganic networks were prepared containing the reactive organic moieties polyvinylalcohol or polyvinylpyrrolidone. Retention of biochemical activity within the micropatterned gel was demonstrated by performing immunobinding assays with immobilized immunoglobulin G (IgG) antibody. The potential application of microfluidics technology to immobilized-enzyme biocatalysis was demonstrated using PDMS-patterned microchannels filled with trypsin-containing sol-gels. This work provides a foundation for the microfabrication of functional protein chips using sol-gel processes.     

Functional integration of serial dilution and capillary electrophoresis on a PDMS microchip

For the quantitative analysis of an unknown sample a calibration curve should be obtained, as analytical instruments give relative, rather than absolute measurements. Therefore, researchers should make standard samples with various known concentrations, measure each standard and the unknown sample, and then determine the concentration of the unknown by comparing the measured value to those of the standards. These procedures are tedious and time-consuming. Therefore, we developed a polymer based microfluidic device from polydimethylsiloxane, which integrates serial dilution and capillary electrophoresis functions in a single device. The integrated microchip can provide a one-step analytical tool, and thus replace the complex experimental procedures. Two plastic syringes, one containing a buffer solution and the other a standard solution, were connected to two inlet holes on a microchip, and pushed by a hydrodynamic force. The standard sample is serially diluted to various concentrations through the microfluidic networks. The diluted samples are sequentially introduced through microchannels by electro-osmotic force, and their laser-induced fluorescence signals measured by capillary electrophoresis. We demonstrate the integrated microchip performance by measuring the fluorescence signals of fluorescein at various concentrations. The calibration curve obtained from the electropherograms showed the expected linearity.     

Control of aphid-vectored and thrips-borne virus spread in lily, tulip, iris and dahlia by sprays of mineral oil, polydimethylsiloxane and pyrethroid insecticide in the field

In this study control of spread by insect vectors of non‐persistent Lily symptomless virus and Lily mottle virus in lily, Tulip breaking virus in tulip, Iris mild mosaic virus, Narcissus latent virus and Iris severe mosaic virus in bulbous iris, and semi‐persistent Dahlia mosaic virus and persistent Tomato spotted wilt virus in dahlia has been evaluated with weekly sprays of mineral oil, beta‐pinene emulsion, polydimethylsiloxane emulsions and pyrethroid insecticide. In lily, beta‐pinene in ‘Wilt Prufgave’ 40% reduction of virus spread. In 1995–97 deltamethrin in ‘Decisgave’ 22–58% reduction. Deltamethrin added to sprays of mineral oil ‘Luxan oil H’ and polydimethylsiloxane (PDMS), e.g. in ‘Dow Corning 36’, efficiently improved control efficacy. The latter was also observed in tulip and dahlia. Mineral oil and deltamethrin gave best control by 81–97% reduction of virus spread at standard spray volumes (6.25 litre ha^?1+0.4 litre ha¹). ‘Luxan oil H’ at 3.125 litre ha^?1 with deltamethrin gave 69–91% control. Efficacy of control by polydimethylsiloxane in ‘Dow Corning 36’ was superior to ‘Luxan anti‐foam’. ‘Dow Corning 36’ with deltamethrin (7+0.4 litre ha^?1) gave satisfactory control (68–87%). In tulip, the control by ‘Dow Corning 36’/deltamethrin sprays proved satisfactory compared with ‘Luxan oil H’/‘Decis’‐sprays. In bulbous iris the efficacy of tested PDMS‐brands was clearly different in favour of ‘Dow Corning 36’. In dahlia mineral‐oil and PDMS‐sprays gave some control of semi‐persistent DaMV (16–24%). This ranged at higher level (65–80%) when deltamethrin was added to the spray mixture. Similar trends were observed in the control of persistent TSWV. The effect of polydimethylsiloxane emulsions in the spectrum of virus‐control agents is described for the first time. The effect of PDMS compared with that of mineral oils and synthetic pyrethroid insecticides is discussed with respect to efficacy, mode of action to prevent virus transmission and possible reduction of bulb weights in vegetatively propagated bulb crops.     

A robust,simple, high‐throughput technique for time‐resolved plant volatile analysis in field experiments

Plant volatiles (PVs) mediate interactions between plants and arthropods, microbes and other plants, and are involved in responses to abiotic stress. PV emissions are therefore influenced by many environmental factors, including herbivore damage, microbial invasion, and cues from neighboring plants, and also light regime, temperature, humidity and nutrient availability. Thus, an understanding of the physiological and ecological functions of PVs must be based on measurements reflecting PV emissions under natural conditions. However, PVs are usually sampled in the artificial environments of laboratories or climate chambers. Sampling of PVs in natural environments is difficult, being limited by the need to transport, maintain and provide power to instruments, or use expensive sorbent devices in replicate. Ideally, PVs should be measured in natural settings with high replication, spatio‐temporal resolution and sensitivity, and modest costs. Polydimethylsiloxane (PDMS), a sorbent commonly used for PV sampling, is available as silicone tubing for as little as 0.60 € m^?1 (versus 100–550 € each for standard PDMS sorbent devices). Small pieces of silicone tubing (STs) of various lengths from millimeters to centimeters may be added to any experimental setting and used for headspace sampling, with little manipulation of the organism or headspace. STs have sufficiently fast absorption kinetics and large capacity to sample plant headspaces over a timescale of minutes to hours, and thus can produce biologically meaningful ‘snapshots’ of PV blends. When combined with thermal desorption coupled to GC–MS (a 40‐year‐old widely available technology), use of STs yields reproducible, sensitive, spatio‐temporally resolved quantitative data from headspace samples taken in natural environments.     

纤维素乙醇发酵液中复杂组分对乙醇渗透汽化传质过程的影响

考察了木质纤维素乙醇发酵液中各组分对乙醇透过聚二甲基硅氧烷(PDMS)-silicalite-1渗透汽化膜传质性能的影响。结果表明:酵母细胞、玉米秸秆残渣和发酵用无机盐可增加乙醇通过膜的通量和选择性;而葡萄糖和甘油的存在会对乙醇的透膜传质产生负面影响;木质纤维素水解后的产物如糠醛和羟基丙酮,表现出对膜分离乙醇轻微的抑制作用。本文建立了渗透汽化优先透醇与纤维素乙醇发酵集成过程,批次发酵20 h后乙醇产率从最初的12.95下降到10.22 g/(L·h),60 h后乙醇产率下降为0,葡萄糖消耗速率与乙醇消耗产率呈同样趋势;连续发酵过程中,乙醇产率较稳定地维持在13.30 g/(L·h)。实验证明,集成过程可及时地将产物乙醇分离出去,能够有效地消除产物抑制,提高乙醇生产速率和葡萄糖转化率。     

Fabrication and Visualization of Capillary Bridges in Slit Pore Geometry

A procedure for creating and imaging capillary bridges in slit-pore geometry is presented. High aspect ratio hydrophobic pillars are fabricated and functionalized to render their top surfaces hydrophilic. The combination of a physical feature (the pillar) with a chemical boundary (the hydrophilic film on the top of the pillar) provides both a physical and chemical heterogeneity that pins the triple contact line, a necessary feature to create stable long but narrow capillary bridges. The substrates with the pillars are attached to glass slides and secured into custom holders. The holders are then mounted onto four axis microstages and positioned such that the pillars are parallel and facing each other. The capillary bridges are formed by introducing a fluid in the gap between the two substrates once the separation between the facing pillars has been reduced to a few hundred micrometers. The custom microstage is then employed to vary the height of the capillary bridge. A CCD camera is positioned to image either the length or the width of the capillary bridge to characterize the morphology of the fluid interface. Pillars with widths down to 250 µm and lengths up to 70 mm were fabricated with this method, leading to capillary bridges with aspect ratios (length/width) of over 100¹.     

An optimized protocol for large‐scale in situ sampling and analysis of volatile organic compounds

Chemical ecology is an ever‐expanding field with a growing interest in population‐ and community‐level studies. Many such studies are hindered due to lack of an efficient and accelerated protocol for large‐scale sampling and analysis of chemical compounds. Here, we present an optimized protocol for such large‐scale study of volatiles. A large‐scale in situ study to understand role of semiochemicals in variation in mating success of lekking blackbuck was conducted. Suitable methods for sampling and statistical analysis were identified by testing and comparing the efficiencies of available techniques to reduce analysis time while retaining sensitivity and comprehensiveness. Solid‐phase extraction using polydimethylsiloxane, analysis using a semiautomated detection of retention time and base peak, and statistical analysis using random forest algorithm were identified as the most efficient methods for large‐scale in situ sampling and analysis of volatiles. The protocol for large‐scale volatile analysis can facilitate evolutionary and metaecological studies of volatiles in situ from all types of biological samples. The protocol has potential for wider application with the analysis and interpretation methods being suitable for all kinds of semiochemicals, including nonvolatile chemicals.     

On-line monitoring of antifouling and fouling-release surfaces using bioluminescence and fluorescence measurements during laminar flow

A laminar flow biofilm-monitoring system was used to determine the efficacies of three antifouling (AF) coatings and five fouling-release (FR) coatings againstVibrio harveyi attachment. On-line measurements of tryptophan fluorescence and bioluminescence from each coating, normalized to an upstream stainless steel coupon, were used to determine the effects of AF and FR surfaces on biofilm formation. The AF coatings consisted of 5, 10, and 35 wt% Sea Nine 211 (C9211) incorporated into a vinyl copolymer. Both the 10 and 35 wt% coatings significantly inhibited biofilm biomass development measured by tryptophan fluorescence compared to the stainless steel control.V. harveyi bioluminescence was significantly greater than tryptophan fluorescence in cells attached to these coatings, suggesting that bioluminescence expression may be a marker for cellular stress or toxicity in biofilms. Five different polydimethylsiloxane (PDMS) FR coatings did not inhibit biofilm formation under low flow conditions. However, four PDMS coatings demonstrated decreased biomass levels compared to stainless steel after exposure to a shear stress of 330 dynes cm^–2. There was no toxic additive in these coatings; bioluminescence and tryptophan fluorescence were proportional.