Depolarization-Induced Increase in Surface Binding and Internalization of 125I-Nerve Growth Factor by PC 12 Pheochromocytoma Cells

The binding and internalization of 125I-nerve growth factor (NGF) by PC12 pheochromocytoma cells was studied as a function of extracellular potassium concentration. Both surface-bound and internalized fractions of 125I-NGF associated with the cells under depolarizing conditions (50 mM K+) increased to 144 +/- 28% (average +/- SEM, six different cell preparations) and to 176 +/- 12% (n = 6), respectively, of those observed at 6.0 mM K+. Scatchard-type analysis of the data indicates increased sites for the binding and internalization of iodinated NGF by the cells. Similar enhancement was observed for cells treated with NGF as well. This voltage-dependent phenomenon was reversible, and also observed in the presence of veratridine. Moreover, withdrawal of extracellular Ca2+ abolished high K+-induced modulation of 125I-NGF binding and internalization, indicating that this effect may be mediated by Ca2+.     

High rate anaerobic digestion of a petrochemical wastewater using biomass support particles

Anaerobic digestion of wastewater from a dimethyl terephthalate plant was studied in continuously stirred tank reactors with plastic net biomass support particles (BSP) at a level of 20% (v/v). The experimental results showed that the BSP system could treat the wastewater at a hydraulic retention time as low as 1.5 d, organic loading as high as 20 kg COD/m3/d and at acidic feed pH as low as 4.5 with 95% COD reduction and biogas production of about 8l/l/d, while the control system without support particles could not treat the wastewater above a 5-d hydraulic retention time, 5 kg COD/m3/d organic loading and a feed pH of 6.0. Thus, augmentation of BSP upgraded the performance of the conventional suspended growth system to an equivalent level to advanced reactors.     

Mechanosensitive channels of Corynebacterium glutamicum functioning as exporters of l-glutamate and other valuable metabolites

In the industrial l-glutamate production established on the use of Corynebacterium glutamicum, l-glutamate synthesized intracellularly is exported through mechanosensitive transmembrane channel proteins (MscCG and MscCG2) activated by the force-from-lipids. The involvement of MscCG2 in l-glutamate export by C. glutamicum was demonstrated in 2018; however, MscCG was previously found to be the major exporter of l-glutamate. Recent advances in research methods, such as development of the microbial patch clamp, revealed unique characteristics of MscCG, including its conductance, opening and closing thresholds, and gating hysteresis, as well as the significant effect of membrane lipids on the channel properties. In addition, the cryoelectron microscopic structure of Escherichia coli MscS, the canonical representative of the mechanosensitive channel family to which MscCG and MscCG2 belong, revealed its new membrane-interacting region, new position within the lipid bilayer, and hook lipids in a newly defined cavity between subunits. In this short review, the applications of bacterial mechanosensitive channels in the development of effective microbial cell factories, which will contribute to sustainable development, are discussed.     

钢渣组分特征及其用于土壤改良的可行性初步研究

通过测定钢渣的化学组成分析得出其组分特征,进一步通过在有降解碱剂HPMA参与的重（轻）度盐碱土壤及钢渣中栽种不同植物种子（玉米、茄子、水稻和长春花）,观察植物的长势,探究钢渣是否可以用于土壤改良。结果发现钢渣的化学成分与土壤基本相同,但部分成分如CaO、Fe₂O₃、MgO、MnO₂等显著高于土壤,而另外一些组分TiO₂、K₂O、Na₂O、P₂O₅在钢渣中未检测出来。对比重（轻）度盐碱土壤,钢渣与HPMA共同作用时,玉米、茄子、水稻和长春花等发芽率及生长速率明显提高;与常用的蛭石、珍珠岩改良剂对比实验中,不同植物存在类似的发芽率和生长速率,说明钢渣可以作为温室土壤结构改良剂;与钢渣产地丰富的树皮土资源配比形成复方改良剂,发现其具有类似花土（泥炭土）的生长速率和发芽率。初步研究表明,钢渣可以用于盐碱地改良,而且对于设施农业的土壤结构改良具有功效,与当地树皮土资源结合,具有形成复方土壤改良剂的潜力。     

Deriving metabolic engineering strategies from genome-scale modeling with flux ratio constraints

Optimized production of bio-based fuels and chemicals from microbial cell factories is a central goal of systems metabolic engineering. To achieve this goal, a new computational method of using flux balance analysis with flux ratios (FBrAtio) was further developed in this research and applied to five case studies to evaluate and design metabolic engineering strategies. The approach was implemented using publicly available genome-scale metabolic flux models. Synthetic pathways were added to these models along with flux ratio constraints by FBrAtio to achieve increased (i) cellulose production from Arabidopsis thaliana; (ii) isobutanol production from Saccharomyces cerevisiae; (iii) acetone production from Synechocystis sp. PCC6803; (iv) H₂ production from Escherichia coli MG1655; and (v) isopropanol, butanol, and ethanol (IBE) production from engineered Clostridium acetobutylicum. The FBrAtio approach was applied to each case to simulate a metabolic engineering strategy already implemented experimentally, and flux ratios were continually adjusted to find (i) the end-limit of increased production using the existing strategy, (ii) new potential strategies to increase production, and (iii) the impact of these metabolic engineering strategies on product yield and culture growth. The FBrAtio approach has the potential to design “fine-tuned” metabolic engineering strategies in silico that can be implemented directly with available genomic tools.     

基于糖原代谢调控的蓝细菌光合细胞工厂优化研究进展

蓝细菌是重要的光合自养微生物,也是最具潜力的光合微生物底盘之一,被广泛应用于光驱固碳细胞工厂的开发.糖原是蓝细菌最重要的天然碳汇物质,糖原代谢对蓝细菌光合碳流的分配和调控具有重要意义.为了优化蓝细菌光合细胞工厂的合成效能,驱动更多的光合碳流重定向至目标代谢产物的合成,已经有多种策略和方法被成功开发用于调控蓝细菌的糖原代...     

From gene to product in yeast: production of fungal cutinase

In the mid-1970s, information technology and recombinant DNA technology were considered as the breakthrough technologies of the final quarter of the 20th century. Now, about 25 years later, information technology has penetrated deeply into our society and nearly everyone uses this technology. Compared to the formidable success of information technology, the progress in the commercialization of recombinant DNA technology is moderate, even when taking into account that all that is related to the technological application of biological sciences needs extensive safety testing. However, there are signs that the speed of this commercialization will increase in the first decade of the 21st century. Moreover, new breakthroughs in our understanding of the complete genetic make up of eukaryotes will contribute to this increase in speed. An important aspect of the commercialization of this technology is the development of cells as factories for the production of valuable and/or useful molecules. Lower eukaryotes, such as yeasts and molds, are the most promising candidates to become the factories of the future, but at present these factories still contains a lot of process lines that may be superfluous under the well controlled conditions in fermentors. On the other hand, the speed and yield of these cellular production lines can be increased by eliminating the rate-determining steps of these process lines. In this contribution to the European Union symposium from Cell to Factory, some steps in the improvement of S. cerevisiae as cell factories for (heterologous) hydrophobic molecules are presented.     

Penicillium roqueforti: a multifunctional cell factory of high value‐added molecules

This is a comprehensive review, with 114 references, of the chemical diversity found in the fungus Penicillium roqueforti. Secondary metabolites of an alkaloidal nature are described, for example, ergot alkaloids such as festuclavine, isofumigaclavines A and B, and diketopiperazine alkaloids such as roquefortines A–D, which are derived from imidazole. Other metabolites are marcfortines A–C, PR‐toxin, eremofortines A–E, mycophenolic and penicillic acids, and some γ‐lactones. Also, recent developments related to the structural characteristics of botryodiplodin and andrastin are studied—the latter has anticancer properties. Finally, we discuss the enzymes of P. roqueforti, which can participate in the biotechnological production of high value‐added molecules, as well as the use of secondary metabolite profiles for taxonomic purposes.     

Mountain cheese factory wastewater treatment with the use of a hybrid constructed wetland

This paper describes the activity period of an experimental hybrid wetland system placed in a cold climate region. The aim is to determine the efficiency of the system in reducing TSS, BOD₅, COD and other pollutants. The constructed wetland consists of a fat-removal unit and a basin for the storage and the distribution of the wastewater which precedes three phytoremediation beds: the first two are parallel and they work as submerged vertical flow wetland with gravel medium for an area of 180 m²; the last is a submerged horizontal flow wetland with sand medium and an area of 360 m². The CW was designed to process a total estimated BOD₅ loading rate of about 24 g m⁻² d⁻¹, which was less than half of the average actual loading rate. The wastewater treatment did not meet the required Italian law outflow limits, most likely due to BOD₅ overloading.     

Seasonal and wastewater stream variation of trace organic compounds in a dairy processing plant aerobic bioreactor

Bioreactors are often an integral part of dairy factory efforts to reduce the biological oxygen demand of their wastewater. In this study, infeed, mixed liquor and supernatant samples of an aerobic bioreactor used by a dairy factory in South-Eastern Australia were analyzed for nutrients and organic compounds using gas chromatography-mass spectrometry and physicochemical analyses. Despite different concentrations of organic inputs into the bioreactor, nutrients and trace organic compounds were reduced significantly (i.e. average concentration of trace organic compounds: infeed = 1681 μg/L; mixed liquor = 257 μg/L; supernatant = 23 μg/L). However, during one sampling period the bioreactor was adversely affected by the organic loading. Trace organic compounds in the samples were predominantly fatty acids associated with animal products. The analyses suggest that it is possible to trace a disruptive input (i.e. infeed with high organic carbon concentrations) into an aerobic bioreactor by measuring concentrations of fatty acids or ammonia.