Study of accumulation behaviour of tungsten based composite using electron probe micro analyser for the application in bone tissue engineering

In this research, a proto-type study we have conducted, where we have synthesized tungsten based composite materials which are tungsten along with combined oxides of other elements like calcium, scandium, barium, and aluminium in the form of powder with bones powder of mice devised by high energy ball mill and later on fabricating high dense pellets by sintering by spark plasma. The particle sizes of the composite materials are found to be 1–2 µm, as evidenced by the electron microscope, suggesting synthesized materials are of micron size. The quantitative and qualitative analysis of sintered pellets are well confirmed by electron probe micro analyzer (EPMA) and energy dispersive X-ray spectrometer (EDS) which illustrate the greater percentage of tungsten presents in the profound scan areas with other elements of the composite. The absence of pores across the 3D geometry suggesting dense sample, which is quite revealed by the X-ray tomography inspection. The prepared sintered pellets from the tungsten based composites are found to be ≈ 99.5% density with the observation of tungsten to be accumulated uniformly across the scan regions along with focussed hot spots as implied by EPMA. This study paves the way, to examine how the tungsten accumulation and the distribution with the other elements for future understanding in bone tissue engineering application and the in vivo specification of tungsten.     

Persistence of occluded viruses in the nests of the paper waspPolistes hebraeus (Hym.: Vespidae)

Bioassays were used to study the infectivity of cytoplasmic polyhedrosis viruses (CPVs), nuclear polyhedrosis viruses (NPVs) and entomopoxviruses (EPVs) contained in 16 nests of the paper waspPolistes hebraues F. in Réunion Island. Several virosis were propagated from 6 nest contents in 5 Lepidoptera:Catopsilia thauruma Saalmüller,Catopsilia florella F.,Callixena versicolora Mabille,Polydesma umbricola Boisduval andEagris sabadius Boisduval. Each of the previous species supported the development of one or two virosis and therefore, wasp nests must be considered as accumulating centres where infectivity of occluded entomoviruses is preserved. The accurate origin of the virosis propagated through bioassays was searched for using ecological investigations on similar natural diseases, REN analysis and a cross-transmission test onSpodoptera mauritia Boisduval. The nuclear polyhedrosis and one cytoplasmic polyhedrosis appearing in bioassays can be assigned respectively to viruses produced byC. thauruma andC. versicolora; the other virosis must be considered as developing in alternate or substitution hosts. Wasp nests could therefore be used to detect the presence of specific viruses in an environment and to collect new virus isolates.     

云南省(虫齿)目二新种和灰背蛇(虫齿)的记述((虫齿)目:厚(虫齿)科、叉(虫齿)科、围(虫齿)科)

本文记述了云南省(虫齿)目二新种,Tapinella bannana sp.n.和Peripsocus plurimaculatus sp.n.及一新种记录种Ophiodopelma semicets Lee and Thornton,其雄虫为首次记载。     

Airborne fungi in an Italian rice mill

Summary Studies employing volumetric spore trap (VSP) and gravity settling culture plates (GSC) were conducted in order to analyse the air spora of a rice mill at Pavia, Italy, from October-December 1988. Results revealed a variety of fungal spores belonging to different genera and including recognized rice pathogenic fungi. The most frequent genera by GSC method includedAcremonium, Alternaria, Aspergillus, Aureobasidium, Cladosporium, Epicoccum, Fusarium, Helminthosporium, Mucor, Nigrospora, Penicillium, Rhizopus, Trichoderma, Trichothecium, and some unidentified fungi. Environmental assessment of fungal spores by VSP revealed that the most prevalent fungi were:Alternaria, Cladosporium, Epicoccum, Helminthosporium, Nigrospora, Pyricularia, Tilletia and hyaline, dark and coloured types of ascospores and basidiospores. Airborne fungal spore concentrations were particularly high (5,000–6,000 spores/m³) in the rooms of the rice mill where the initial stages of rough rice transformation take place, and dropped to 2,500 spores/m³ in the last room, where workers are. During a temporary interruption of the working processes, air spora concentration dropped below 1,000 spores/m³.Cladosporium, Epicoccum andNigrospora spores were predominant in all subdivisions of the indoor environments of the rice mill.     

High plating efficiency and plant regeneration frequency in low density protoplast cultures derived from an embryogenic Brassica napus cell suspension

Protoplasts were isolated from an embryogenic cell suspension culture derived from microspores of Brassica napus cv. Jet Neuf. Protoplast yield varied with the cell suspension growth medium. Optimization of protoplast plating density, manipulation of culture medium, carbon source and medium matrix, and inclusion of Ficoll resulted in protoplast plating efficiencies close to 30%. Placement of the protoplasts close to the gas interface contributed greatly to the elevated plating efficiency. Low density cultures could be induced to regenerate calli at optimum plating efficiencies if grown in the presence of nurse culture. This is of great advantage for manipulation of individual protoplasts or for microinjection. Plants were regenerated directly from the cell suspension or from the protoplast cultures.Abbreviations BA N⁶-benzyladenine - 2,4-D 2,4-dichlorophenoxyacetic acid - IAA indole-3-acetic acid - NAA naphthaleneacetic acid     

用纸浆代棉花合成CMC

羧甲基纤维素(CMC)系天然纤维素的衍生物。它是由天然纤维素分子上引入强极性羧甲基钠而得到的。我们采用纸浆为原料替代棉花生产CMC,测试了其性能,并讨论了反应温度、反应时间和碱用量对粘度的影响。结果表明:此法简化了工艺,原料来源广泛,产品性能优良,成本低,能满足使用要求。     

Biosynthesis of polyketides. Purification and inhibition studies of 6-methylsalicylic acid synthase

6-MSA³ synthase has been purified 190-fold with 33% yield. The purification was found to be dependent on the presence of glycerol. The acetylenic inhibitors 3-pentynoyl- and 2-hexynoyl-NAC completely inhibit 6-MSA production at concentrations in which fatty acid synthesis, TAL production as well as NADPH oxidation are only partially affected. These results confirm earlier studies on the specificity of inhibition by acetylenic inhibitors and support a mechanism wherein the NADPH-mediated reduction step occurs on a 6-carbon rather than on an 8-carbon intermediate.     

Utility of field-based artificial streams for assessing effluent effects on riverine ecosystems

Experimentation using field-based artificial streams provides a promising, complimentary approach to biomonitoring assessments because artificial streams provide control over relevant environmental variables and true replication of treatments. We have used large and small artificial stream systems, based in the field, to examine the effect of treated bleached kraft pulp mill effluent (BKME) on the benthos of three large rivers in western Canada. Under natural regimes of temperature, water chemistry, and insolation, these artificial streams provide current velocities and substrata to food chains or food webs that are representative of those in the study river. With these tools we have shown that BKME stimulated mayfly growth in the Thompson River above that which could be accounted for by fertilization of their algal food supply. In contrast, moulting frequency was inhibited at high BKME concentrations. Results from artificial streams also indicate that increased algal biomass and abundances of benthic communities downstream of BKME outfalls were induced by nutrient enrichment from the effluent. BKME treatments did not change diatom species richness in the Fraser River, or diatom species diversity in either the Athabasca or Fraser Rivers. Artificial streams provide a means of understanding the mechanisms of stressor effects over a continuum ranging from single stressor effects on specific taxa to the effects of multiple stressors on communities and ecosystems. Because riverside deployment provides environmental realism within a replicated experimental design, this approach can (i) address questions that cannot be examined using laboratory tests or field observations, (ii) improve our mechanistic understanding of stressor effects on riverine ecosystems, and (iii) can contribute directly to the development, parameterization, and testing of models for predicting ecosystem-level responses.     

Organosolv pulping of wheat straw by use of phenol

A central composite design was used to investigate the influence of the cooking conditions (time, temperature and phenol concentration) for wheat straw with phenol-water mixtures on the properties of the pulp obtained (yield and holocellulose, -cellulose, lignin and ethanol-benzene extractable contents) and the pH of the resulting wastewater. A second-order polynomial model consisting of three independent process variables was found to accurately describe the organosolv pulping of wheat straw. The equations derived predict the yield, the holocellulose, -cellulose, lignin and ethanol-benzene extractable contents of the pulp, and the pH of the wastewater with multiple-R, R² and adjusted-R² high values. The process variables must be set at low variables in order to ensure a high yield and pH. Conversely, if high holocellulose and -cellulose contents, and low lignin and ethanol-benzene extractable contents are desired, then a high temperature (200°C), long cooking time (120 min), and intermediate phenol concentration (65%) must be used.