Environmental sustainability of orthopedic devices produced with powder bed fusion

Additive manufacturing consists in melting metallic powders to produce objects from 3D data, layer upon layer. Its industrial applications range from automotive, biomedical (e.g., prosthetic implants for dentistry and orthopedics), aeronautics and others. This study uses life cycle assessment to evaluate the possible improvement in environmental performance of laser‐based powder bed fusion additive manufacturing systems on prosthetic device production. Environmental impacts due to manufacturing, use, and end of life of the designed solution were assessed. In addition, two powder production technologies, gas atomization (GA) and plasma atomization (PA), were compared in order to establish the most sustainable one. Production via traditional subtractive technologies and the additive manufacturing production were also compared. 3D building was found to have a significant environmental advantage compared to the traditional technology. The powder production process considerably influences on a damage point of view the additive manufacturing process; however, its impact can be mitigated if GA powders are employed.     

右美托咪定联合尼卡地平用于老年骨科手术患者控制性降压时对炎症因子的影响

目的:探讨右美托咪定联合尼卡地平用于老年骨科手术患者控制性降压的临床疗效及其对炎症因子水平的影响。方法:选择2014年1月至2016年1月在我院行骨科手术的老年患者68例,随机分为两组,A组和B组,每组34例。A组患者接受尼卡地平控制性降压,B组患者在A组基础上静脉注射右美托咪定。比较两组患者的手术情况以及术中血流动力学指标,术中及术后血清IL-6(Interleukin-6)、TNF-α(Tumor necrosis factor-ɑ)以及CRP(C-reactive protein)的水平。结果:B组患者术中尼卡地平的使用剂量及术中出血量显著少于A组(P0.05),术后苏醒时间及拔管时间较A组显著缩短(P0.05),术中Fromme术野质量评分明显低于A组患者(P0.05)。降压后5 min,A组患者的HR显著加快(P0.05),B组患者HR相对稳定,且明显慢于A组(P0.05);两组患者的MAP以及CVP显著低于降压前(P0.05),且两组差异无统计学意义(P0.05),A组患者在降压后30 min的MAP和CVP较B组显著升高(P0.05)。两组患者术后不同时间点血清IL-6、TNF-α和CRP的水平显著上升(P0.05),其中B组患者血清IL-6、TNF-α和CRP的水平较A组明显较低(P0.05)。结论:右美托咪定联合尼卡地平用于老年患者行骨科手术时控制性降压的疗效显著,可有效降低尼卡地平的使用剂量,对患者血流动力学影响较小,并可减轻患者术后应激反应,利于患者术后恢复。     

Total Hip Arthroplasty: Direct Anterior Approach Versus Posterior Approach in the First Year of Practice

BackgroundThe direct anterior approach (DAA) for total hip arthroplasty (THA) has been popularized as a less invasive technique, however outcomes within the first year of practice after fellowship have not been investigated. The primary aim was to determine differences in complications and outcomes between DAA and posterior approach (PA) in the first year of practice. The secondary aim was to determine if there was a learning curve factor in DAA and PA after fellowship training.MethodsTHA cases performed by two surgeons during their first year of practice were reviewed. Overall, 181 THAs (91 DAA, 90 PA) in 168 patients, were performed. Intraoperative differences (blood loss, operative time), hospital stay, complications, reoperations, and revisions were compared.ResultsOverall surgical complications were similar between DAA and PA (11% vs. 9%, p=0.64), but complication profiles were different: dislocation (1% vs. 4%, p=0.17), intraoperative femoral fracture (2% vs. 1%, p=0.32), postoperative periprosthetic fractures (2% vs. 3%, p=0.64). neuropraxia (3% vs. 0%, p=0.08). There was no difference in rate of reoperation (1% vs. 3%, p=0.31). There was a difference in rate of revision at final follow-up (0% vs. 6%, p=0.02). DAA consisted of longer operative time (111 vs. 99 minutes; p<0.001), however was only significant in the first 50 cases (p<0.001), while the subsequent cases were similar (p=0.31). There was no difference in the first 50 cases compared to the subsequent cases for either approach regarding blood loss, complications, reoperations, or revisions.ConclusionDAA and PA for THA performed within the first year of practice exhibit similarly low complication rates, but complication profiles are different. In our series, PA did demonstrate a higher risk of revision at final follow-up. A learning curve is not unique to the DAA. Both DAA and PA THA exhibited a learning curve in the first 50 cases performed at the start of a surgeon’s practice. Level of Evidence: III     

根据退行性脊柱侧凸患者症状选择不同手术方案的临床研究

目的:探究根据退行性脊柱侧凸患者症状选择不同手术方案的治疗效果。方法:随机选取我院2007年9月到2015年10月收治的退行性脊柱侧凸患者124例,根据症状不同分A组和B组。A组62例患者腰背痛,接受长节段矫形内固定术;B组62例患者下肢症状明显,接受责任节段减压内固术。治疗期间记录两组手术时间、术中出血量、固定节段数及腰前凸角度,于治疗前、治疗后1个月以及末次随访时腰椎侧凸处的Cobb角,并采用视觉模拟评分法(VAS)和Oswestry功能障碍指数(ODI)评价患者疗效。结果:A组手术时间、出血量、固定节段数及腰前凸角度显著高于B组(P0.05);治疗后和末次随访两组患者VAS评分、ODI指数及Cobb角均有明显好转(P0.05),两组治疗后和末次随访之间的差异无统计学意义(P0.05)。结论:退行性脊柱侧凸在治疗时需根据患者具体症状选择不同的手术方案,长节段矫形内固定术耗时长、术中出血量多,在治疗时应谨慎,预防相关并发症的发生。     

Behavioral strategies for the reduction of pain and anxiety associated with orthopedic trauma

This study examined the efficacy of behavioral strategies in alleviating pain and anxiety associated with severe orthopedic trauma. Sixty-four patients with multiple fractures were divided into four groups: (1) control, (2) attention only, (3) EMG biofeedback-assisted relaxation, and (4) audiotaped relaxation training. All were measured over at least six sessions, or as long as hospital stay permitted. Significant between group differences were found on the following: systolic blood pressure, pheripheral temperature, subjective units of discomfort, state anxiety, with a trend for use of sleep medications. No differences were found on other vital signs, EMG recordings, or other medications. EMG-biofeedback relaxation and relaxation training were relatively equivalent for all measures, and little or no change was observed for those patients who received attention only or served as controls.     

Selective adhesion and mineral deposition by osteoblasts on carbon nanofiber patterns

In an effort to develop better orthopedic implants, osteoblast (bone-forming cells) adhesion was determined on microscale patterns (30 microm lines) of carbon nanofibers placed on polymer substrates. Patterns of carbon nanofibers (CNFs) on a model polymer (polycarbonate urethane [PCU]) were developed using an imprinting method that placed CNFs in selected regions. Results showed the selective adhesion and alignment of osteoblasts on CNF patterns placed on PCU. Results also showed greater attraction forces between fibronectin and CNF (compared with PCU) patterns using atomic force microscope force-displacement curves. Because fibronectin is a protein that mediates osteoblast adhesion, these results provide a mechanism of why osteoblast adhesion was directed towards CNF patterns. Lastly, this study showed that the directed osteoblast adhesion on CNF patterns translated to enhanced calcium phosphate mineral deposition along linear patterns of CNFs on PCU. Since CNFs are conductive materials, this study formulated substrates that through electrical stimulation could be used in future investigations to further promote osteoblasts to deposit anisotropic patterns of calcium-containing mineral similar to that observed in long bones.     

Nano-hydroxyapatite-thermally denatured small intestine sub-mucosa composites for entheses applications

The objective of the present in vitro study was to estimate the adhesion strength of nanometer crystalline hydroxyapatite (HA)-small intestine sub-mucosa (SIS) composites on model implant surfaces. Techniques of thermal denaturation (60 degrees C, 20 min) of SIS were used to enhance the adhesion strength of entheses materials to underlying implants. Specifically, results indicated that the adhesion strength of thermally denatured SIS was 2-3 times higher than that for normal unheated SIS. In addition, aqua-sonicated, hydrothermally treated nano-HA dispersions enhanced the adhesion strength of SIS on implant surfaces. Importantly, results of the present study demonstrated that human skeletal muscle cell (hSkMC) numbers were not affected by thermally denaturing SIS in nano-HA composite coatings; however, they increased on aqua-sonicated nano-HA/SIS composites compared with SIS alone. Interestingly, thermally denatured SIS that contained aqua-sonicated, hydrothermally treated nano-HA decreased human osteoblasts (hOBs) numbers compared with respective unheated composites; all other composites when thermally denatured did not influence hOB numbers. Results also showed that the number of hOBs increased on nano-HA/SIS composites compared with SIS composites alone. Human mesenchymal stem cell (hMSC) numbers were not affected by the presence of nano-HA in SIS composites. For these reasons, the collective results of this in vitro study demonstrated a technique to increase the coating strength of entheses coatings on implant surfaces (using thermally denatured SIS and aqua-sonicated, hydrothermally prepared nano-HA) while, at the same time, supporting cell functions important for entheses regeneration.     

Bone‐specific kinetic model to quantify periosteal and endosteal blood flow using indocyanine green in fluorescence guided orthopedic surgery

This letter describes a hybrid plug/compartment (HyPC) kinetic model to fit dynamic indocyanine green fluorescence data acquired in a porcine model of long bone traumatic fracture. Parametric images of periosteal blood flow, endosteal blood flow, total bone blood flow and fraction of endosteal‐to‐periosteal flow were obtained by applying the HyPC model on a pixel‐by‐pixel basis. Intraoperative discrimination between healthy and damaged bone could facilitate debridement reducing post‐operative complications from non‐union and infection. The ability to quantify periosteal and endosteal blood flow could inform nail vs. plate‐and‐screw decisions to avoid further compromising cortical blood supply.