Respiratory components in acidophilic bacteria that respire on iron

Abstract

Microorganisms capable of aerobic respiration on ferrous ions are spread throughout eubacterial and archaebacterial phyla. Phylogenetically distinct organisms were shown to express spectrally distinct redox‐active biomolecules during autotrophic growth on soluble iron. A new iron‐oxidizing eubacterium, designated as strain Funis, was investigated. Strain Funis was judged to be different from other known iron‐oxidizing bacteria on the bases of comparative lipid analyses, 16S rRNA sequence analyses, and cytochrome composition studies. When grown autotrophically on ferrous ions, Funis produced conspicuous levels of a novel acid‐stable, acid‐soluble yellow cytochrome with a distinctive absorbance peak at 579 nm in the reduced state.

Stopped‐flow spectrophotometric kinetic studies were conducted on respiratory chain components isolated from cell‐free extracts of Thiobacillus ferrooxidans. Experimental results were consistent with a model where the primary oxidant of ferrous ions is a highly aggregated c‐type cytochrome that then reduces the periplasmic rusticyanin. The Fe(II)‐dependent, cytochrome c‐catalyzed reduction of the rusticyanin possessed three kinetic properties in common with corresponding intact cells that respire on iron: the same anion specificity, a similar dependence of the rate on the concentration of ferrous ions, and similar rates at saturating concentrations of ferrous ions     

Biotransformations Of Fluoroaromatic Compounds: Accumulation Of Hydroxylated Products From 3-Fluorophthalic Acid Using Mutant Strains Of Pseudomonas Testosteroni

Biotransformations of 3-fluorophthalic acid have been investigated using blocked mutants of Pseudomonas testosteroni that are defective in the metabolism of phthalic acid (benzene-1,2-dicar-boxyfic acid). Mutant strains were grown with L-glutamic acid in the presence of 3-fluorophthalic acid as inducer of phthalic acid catabolic enzymes. Products that accumulated in the medium were isolated, purified and identified as the fluoroanalogues of those produced from phthalic acid by the same strains. The previously undescribed fluorochemicals cis-3-fluoro-4,5-dihydro-4,5-dihydroxyphthalic acid (VI) and 3-fluoro-4,5-dihydroxyphthalic acid (VII) have been obtained by biotransformation of 3-fluorophthalic acid, and 3-fluoro-5-hydroxyphthalic acid (X) from (VI) by freeze drying. In addition, samples of 2-fluoro-3,4-dihydroxybenzoic acid (2-fluoroprotocatechuic acid, VIII) and 3-fluoro-4,Sdi-hydroxybenzoic acid (5-fluoroprotocatechuic acid, IX) were obtained with a mutant deficient in the ring-fission enzyme, showing that the fluorine substituent in their precursor substrate (VII) is not recognized by the decarboxylase of the pathway, which shows no preference for which carboxyl group is removed. These studies of 3-fluorophthalic acid catabolism demonstrate the opportunities available for the production of novel fluorochemicals in reasonable yields by microbial transformations.     

农业生态系统中新物种引进的初步探讨

在现有的农业生态系统中,引进某些新物种,往往可以使整个系统的功能发生变化。如果新物种引进得当,则可产生良好的效果,系统功能得以改善,效益提高;反之,则会造成人力、物力、财力的损失,削弱系统的功能,甚至可能遗患无穷。因此,对农业生态系统中     

Environmental conditions during glycerol bioconversion affect 3-hydroxypropionic acid bioproduction by Limosilactobacillus reuteri DSM 17938

3-Hydroxypropionic acid (3-HP) is a platform molecule whose biological production was carried out by the bacterium Limosilactobacillus reuteri according to a two-step process: first, a growth phase in batch mode on glucose, then a glycerol bioconversion into 3-HP in fed-batch mode. With the objective of improving 3-HP bioproduction, this study aimed at defining the operating conditions during the bioconversion phase that increases the bioproduction performance. A central composite rotatable design allowed testing various pH levels and specific glycerol feeding rates. By establishing response surfaces, optimal conditions have been identified that were different depending on the considered output variable (final 3-HP quantity, 3-HP production yield and production rate). Of them, 3-HP final quantity and 3-HP production yield were maximized at pH 6.0 and at specific glycerol feeding rates of 60 and 55 mg_gly g_CDW⁻¹ h⁻¹, respectively. The specific 3-HP production rate was the highest at the upper limit of the specific substrate feeding rate (80 mg_gly g_CDW⁻¹ h⁻¹) but was not affected by the pH. An additional experiment was carried out at pH 6.0 and a specific glycerol feeding rate of 80 mg_gly g_CDW⁻¹ h⁻¹ to validate the previous observations. In conclusion, the results showed a significant improvement of 3-HP concentration by 13%, of specific production rate by 34% and of 3-HP volumetric productivity by 39%, as compared to the initial values.     

Comparative LCA studies of simulated HMF biorefineries from maize and miscanthus as an example of first- and second-generation biomass as a tool for process development

5-Hydroxymethylfurfural (HMF) is a versatile platform chemical for a fossil free, bio-based chemical industry. HMF can be produced by using fructose as a feedstock. Using edible, first-generation biomass to produce chemicals has been questioned in terms of potential competition with food supply. Second-generation biomass like miscanthus could be an alternative. However, there is a lack of information if second-generation lignocellulosic biomass is a more sustainable feedstock to produce HMF. Therefore, a life cycle assessment was performed in this study to determine the environmental impacts of HMF production from miscanthus and to compare it with HMF from high-fructose corn syrup (HFCS). HFCS from either Hungary or Baden-Württemberg (Germany) was considered. Compared to the HFCS biorefineries the miscanthus concept is producing less emissions in all impact categories studied, except land occupation. Overall, the production and usage of second-generation biomass could be especially beneficial in areas where the use of N fertilizers is restricted. Besides, conclusions for the further development of the on-farm biorefinery concept were elaborated. For this purpose, process simulations from a previous study were used. Results of the previous study in terms of TEA and the current LCA study in terms of environmental sustainability indicate that the lignin depolymerization unit in the miscanthus biorefinery has to be improved. The scenario without lignin depolymerization performs better in all impact categories. The authors recommend to not further convert the lignin to products like phenol and other aromatic compounds. The results of the contribution analyses show that the major impact in the HMF production is caused by the auxiliary materials in the separation units and the required heat. Further technical development should focus on efficient heat as well as solvent use and solvent recovery. At this point further optimizations will lead to reduced emissions and costs at the same time.     

2-β-d-Glucopyranosyloxy-2-methylpropanol in Acacia sieberana var. woodii

A new diol glucoside, 2-β-d-glucopyranosyloxy-2-methylpropanol, the first reported naturally occurring monoglucoside of an aliphatic dihydric alcohol, was isolated from pods of Acacia sieberana var. woodii. Structure elucidation was based on ¹ H and ¹³C NMR spectroscopy, and enzymatic analyses. The compound was hydrolysed very slowly by almond β-glucosidase, but cleaved by a β-glucuronidase enzyme complex from Helix pomatia.     

The use of a partition locus to increase stability of tryptophan-operon-bearing plasmids in Escherichia coli

The stability of different derivatives of plasmid vectors pBR322 and pACYC184 carrying the tryptophan operon of Escherichia coli was monitored in various media. It was found that in the absence of any special selective pressure, all plasmids were lost from the culture. The stability varied depending both on the orientation of the inserted tryptophan fragment and the growth media used. The pBR322::trp+ plasmids were lost at an average frequency of 0.3 to 0.8% per cell generation, while the pACYC184::trp+ plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost, indicating a high stability of the plasmid::cloned DNA as such. To increase the stability of the cloning vectors, the partition locus of plasmid pSC101 was added to both the pBR322::trp+ and pACYC184::trp+ plasmids. The addition of this gene increased the replicon stability at least 3- to 10-fold, with the pBR322::trp+-par+ plasmids being the most stable. Also in this case, the stability was dependent on the plasmid type and on the growth medium. In no case was there a discoordinate loss of the antibiotic-resistance and tryptophan genes from the vectors.     

Novel shuttle plasmid vehicles for Escherichia-Streptococcus transgeneric cloning

A novel plasmid vector that is able to replicate both in Escherichia coli and in Streptococcus sanguis is described. This 9.2-kb plasmid, designated pVA856, carries Cm^r, Tc^r and Em^r determinants that are expressed in E. coli. Only the Em^r determinant is expressed in S. sanguis. Both the Cm^r and the Tc^r of pVA856 may be insertionally inactivated. This plasmid affords several different cleavage-ligation strategies for cloning in E. coli followed by subsequent introduction of chimeras in to S. sanguis. In addition, we have modified a previously described E. coli-S. sanguis shuttle plasmid [pVA838; Macrina et al., Gene 19 (1982) 345–353], so that it is unable to replicate in S. sanguis. The utility of such a plasmid for cloning and selecting sequences enabling autonomous replication in S. sanguis is demonstrated.     

A simple method for shortening a plasmid genome using a system of plasmid cointegration mediated by a Tn3 mutant

This paper describes a simple method for the isolation of small plasmids of various sizes from pSMI, a derivative of the resistance plasmid R 100. The method is based on the observation that a repressor-negative mutant of the ampicillin-resistance (amp^r) transposon Tn3, Tn3 No. 5, mediates cointegration of a plasmid carrying Tn 3 No. 5 (pMB8::Tn 3 No. 5) into virtually any site on pSMI. The resulting cointegrate plasmids contain the pSMI sequence which is joined with the amp^r gene of the Tn 3 mutant. This cointegration is so frequent that large cointegrate plasmids can be readily detected in the total plasmid DNA prepared from cells carrying pSMI and pMB8::Tn3 No. 5. We were able to isolate small plasmids of various sizes by digesting the total plasmid DNAs with restriction endonucleases which cut both pSM 1 and Tn3 No. 5 sequences present in the cointegrates and subsequently ligating the restriction fragment containing both the amp^r gene and the region necessary for replication of pSMI. Analysis of these plasmids, named pBV plasmids, with restriction endonucleases and by nucleotide sequencing allowed us to determine regions necessary or unnecessary for replication, thus defining a minimal replication region of pSMI. The present method is generally useful for the isolation of small derivatives from any large plasmid for the study of genes and sites adjacent to or within the minimal replication region of the plasmid.