Two centuries of growth among Czech children and youth

The trend of increasing height can be interpreted as a reflection of the unfolding progress of civilization. Height changes among children and adolescents are good markers of this trend. We analyze the secular trend in the heights of children and adolescents in the Czech Republic on the basis of data from anthropological surveys. The earliest height data pertain to Czech youths who attended the Military Schools in Austria in 1800-1809. Data also exist for 1895 and continue in 1951 and at 10-year intervals thereafter. Growth curves were obtained for separate age groups by fitting mean values via third-order polynomial smoothing splines. Between 1951 and 2001, the mean heights of boys and girls aged 2.5 years increased by 2.7 and 3 cm, respectively. Since 1895, the mean height of 13-year-old boys has increased by 19.4 cm, and the mean height of girls has increased by 18.3 cm.     

DIA-Based Proteomics Identifies IDH2 as a Targetable Regulator of Acquired Drug Resistance in Chronic Myeloid Leukemia

Drug resistance is a critical obstacle to effective treatment in patients with chronic myeloid leukemia. To understand the underlying resistance mechanisms in response to imatinib mesylate (IMA) and adriamycin (ADR), the parental K562 cells were treated with low doses of IMA or ADR for 2 months to generate derivative cells with mild, intermediate, and severe resistance to the drugs as defined by their increasing resistance index. PulseDIA-based (DIA [data-independent acquisition]) quantitative proteomics was then employed to reveal the proteome changes in these resistant cells. In total, 7082 proteins from 98,232 peptides were identified and quantified from the dataset using four DIA software tools including OpenSWATH, Spectronaut, DIA-NN, and EncyclopeDIA. Sirtuin signaling pathway was found to be significantly enriched in both ADR-resistant and IMA-resistant K562 cells. In particular, isocitrate dehydrogenase (NADP(+)) 2 was identified as a potential drug target correlated with the drug resistance phenotype, and its inhibition by the antagonist AGI-6780 reversed the acquired resistance in K562 cells to either ADR or IMA. Together, our study has implicated isocitrate dehydrogenase (NADP(+)) 2 as a potential target that can be therapeutically leveraged to alleviate the drug resistance in K562 cells when treated with IMA and ADR.     

Scaling physiological measurements for individuals of different body size

This paper examines how selected physiological performance variables, such as maximal oxygen uptake, strength and power, might best be scaled for subject differences in body size. The apparent dilemma between using either ratio standards or a linear adjustment method to scale was investigated by considering how maximal oxygen uptake (l.min-1), peak and mean power output (W) might best be adjusted for differences in body mass (kg). A curvilinear power function model was shown to be theoretically, physiologically and empirically superior to the linear models. Based on the fitted power functions, the best method of scaling maximum oxygen uptake, peak and mean power output, required these variables to be divided by body mass, recorded in the units kg 2/3. Hence, the power function ratio standards (ml.kg-2/3.min-1) and (W.kg-2/3) were best able to describe a wide range of subjects in terms of their physiological capacity, i.e. their ability to utilise oxygen or record power maximally, independent of body size. The simple ratio standards (ml.kg-1.min-1) and (W.kg-1) were found to best describe the same subjects according to their performance capacities or ability to run which are highly dependent on body size. The appropriate model to explain the experimental design effects on such ratio standards was shown to be log-normal rather than normal. Simply by taking logarithms of the power function ratio standard, identical solutions for the design effects are obtained using either ANOVA or, by taking the unscaled physiological variable as the dependent variable and the body size variable as the covariate, ANCOVA methods.     

Comparison of European and US biological indicators for ethylene oxide sterilization

Summary Biological indicators (BIs) are used to monitor ethylene oxide (EO) gas sterilization processes for medical devices. Several European and United States BIs for EO sterilization were evaluated for resistance according to both United States Pharmacopeia (USP) XXI and United Kingdom's (UK) tests for D-values. US BIs areB. subtilis var. niger spores on paper strips or disc carriers while European BIs use aluminum strips, quartz sand, or cotton yarn. Numerous BIs per run and runs per lot, as well as 2–3 different lots of BIs from each manufacturer, were examined. Both British and US BIs met their respective label claims for rates of inactivation when tested against British and USP EO test parameters, respectively. However, Danish BIs, on cotton yarn or quartz sand, were not inactivated following USP specifications during the exposure dwell times tested (600 mg L^–1 EO, 54°C, 60% RH, 0–110 min). The Danish BIs will require further testing in order for us to determine if theirB. subtilis spores are unusually resistant to EO or if the spore carrier substrates protect the spores from the sterilizing gas. In conclusion, the British and American BIs for EO sterilization are equivalent in resistance despite differences in carrier substrate, recovery conditions, calculation methods for D-values, and the labeled sterilization conditions for use.     

Calibration of prestained protein molecular weight standards for use in the "Western" or enzyme-linked immunoelectrotransfer blot techniques

Prestained protein molecular weight standards allow easy, direct visual location of electrophoretically transblotted lanes on nitrocellulose. They also provide a simple and accurate means for calibrating the molecular weights of resolved bands. Commercial prestained protein molecular weight standards, however, appear to have significantly different molecular weights from the original unstained proteins. We describe a calibration of these prestained molecular weight standards.     

Correction of timing errors in photomultiplier tubes used in phase-modulation fluorometry

The measurement of fluorescence lifetimes is known to be hindered by the wavelenght-dependent and photocathode area-dependent time response of photomultiplier tubes. A simple and direct method is described to minimize the effects in photomultiplier tubes for phase-modulation fluorometry. Reference fluorophores of known lifetime were used in place of the usual scattering reference. The emission wavelenghts of the reference and sample were matched by either filters or a monochromator, and the use of a fluorophore rather than a scatter decreases the differences in spatial distribution of light emanating from the reference and sample. Thus photomultiplier tube artifacts are minimized. Five reference fluorophores were selected on the basis of availability, ease of solution preparation, and constancy of lifetime with temperature and emission wavelenght. These compounds are p-terphenyl, PPO, PPD, POPOP and dimethyl POPOP. These compounds are dissolved in ethanol to give standard solutions that can be used over the temperature range from ?55 to +55°C. Purging with inert gas is not necessary. The measured phase and modulation of the reference solution is used, in conjunction with the known reference, lifetime, to calculate the actual phase and modulation of the exictation beam. The use of standard fluorophores does not require separate experiments to quantify photomultiplier effects, and does not increase the time required for the measurement of fluorescence lifetimes. Examples are presented which demonstrate the elimination of artifactual photomultiplier effects in measurements of the lifetimes of DADH (0.4 ns) and indole solutions quenched by iodide. In addition, the use of these reference solutions increases the accuracy of fluorescence lifetime measurements ranging ranging to 30 ns. We judge this method to provide more reliable lifetime measurements by the phase and modulation method. The test solutions and procedures we describe may be used by other laboratories to evaluate the performance of their phase fluorometers.     

The use of isochronal reference standards in phase and modulation fluorescence lifetime measurements

Errors in phase and modulation lifetime measurements observed with the only commercially available instrument are readily apparent when the Debye-Sears modulation tank is not perfectly tuned. Unfortunately, we have found that exact tuning was extremely difficult to achieve and maintain. We report that these errors could be reduced by using single-lifetime (homogeneous) reference standards whose fluorescence lifetime approximated that of the unknown sample (isochronal standards). A number of useful standards are suggested. In the proposed method, the phase shift and relative modulation of the sample emission are measured using the isochronal standard as a reference to determine the effective characteristics of the sinusoidal excitation. The importance of the improvement in accuracy accomplished by the proposed methods is illustrated by the accurate resolution of fluorescence lifetime heterogeneity for two known heterogeneous samples.     

Bridging the gap: How the National Core Arts Standards forge the divide between the arts and assessment-based learning

ABSTRACT

This article is a review and thematic analysis of the 2014 National Core Arts Standards (NCAS). Historically, there exists a gap between the arts and assessment-based educational practices. Thematic analysis of the NCAS reveals a policy striving to bridge the gap between the way arts educators envision arts in schools, and the current reality of assessment-based schooling in the United States. This policy could become the foundation for the recognition of the arts as academically rigorous subject matter, capable of existing and thriving in an assessment-oriented world; it remains to be seen as to how and if arts educators will use and adapt NCAS. Is the NCAS merely a symbolic policy or does it have the support behind it to be a material policy that truly creates change in the educational system?     

Evaluation of the suchey–brooks method of age estimation in an Australian subpopulation using computed tomography of the pubic symphyseal surface

Despite the prominent use of the Suchey–Brooks (S–B) method of age estimation in forensic anthropological practice, it is subject to intrinsic limitations, with reports of differential interpopulation error rates between geographical locations. This study assessed the accuracy of the S–B method to a contemporary adult population in Queensland, Australia and provides robust age parameters calibrated for our population. Three‐dimensional surface reconstructions were generated from computed tomography scans of the pubic symphysis of male and female Caucasian individuals aged 15–70 years (n = 195) in Amira® and Rapidform®. Error was analyzed on the basis of bias, inaccuracy and percentage correct classification for left and right symphyseal surfaces. Application of transition analysis and Chi‐square statistics demonstrated 63.9 and 69.7% correct age classification associated with the left symphyseal surface of Australian males and females, respectively, using the S–B method. Using Bayesian statistics, probability density distributions for each S–B phase were calculated, providing refined age parameters for our population. Mean inaccuracies of 6.77 (±2.76) and 8.28 (±4.41) years were reported for the left surfaces of males and females, respectively; with positive biases for younger individuals (<55 years) and negative biases in older individuals. Significant sexual dimorphism in the application of the S–B method was observed; and asymmetry in phase classification of the pubic symphysis was a frequent phenomenon. These results recommend that the S–B method should be applied with caution in medico‐legal death investigations of Queensland skeletal remains and warrant further investigation of reliable age estimation techniques. Am J Phys Anthropol, 2013. © 2013 Wiley Periodicals, Inc.