Effect of tower base painting on willow ptarmigan collision rates with wind turbines

1. Birds colliding with turbine rotor blades is a well‐known negative consequence of wind‐power plants. However, there has been far less attention to the risk of birds colliding with the turbine towers, and how to mitigate this risk.
2. Based on data from the Smøla wind‐power plant in Central Norway, it seems highly likely that willow ptarmigan (the only gallinaceous species found on the island) is prone to collide with turbine towers. By employing a BACI‐approach, we tested if painting the lower parts of turbine towers black would reduce the collision risk.
3. Overall, there was a 48% reduction in the number of recorded ptarmigan carcasses per search at painted turbines relative to neighboring control (unpainted) ones, with significant variation both within and between years.
4. Using contrast painting to the turbine towers resulted in significantly reduced number of ptarmigan carcasses found, emphasizing the effectiveness of such a relatively simple mitigation measure.

     

Host gall size and oviposition success by the parasitoid Eurytoma gigantea

Abstract. 1. Eurytoma gigantea Walsh is a specialist parasitoid of the tephritid gallmaker Eurosta solidaginis (Fitch).
2. In the natural environment the incidence of parasitism by Eurytoma is greater in small galls than in large ones.
3. Laboratory experiments demonstrated that small galls are not more frequently discovered; however, oviposition attempts on small galls were more likely to be successful.
4. Eurytoma spends much time probing galls too big to penetrate; this leads to a decrease in foraging efficiency when many large galls are present.
5. The chance of successfully penetrating a gall depends on the thickness of the gall wall and the length of the parasitoid's ovipositor.
6. A simulation model was constructed which shows that a gallmak-er's chance of being parasitized depends on gall size, the number of parasitoids that discover the gall, and their ovipositor lengths.     

Autumnal moth – why autumnal?

1. As for some other spring‐feeding moths, adult flight of Epirrita autumnata (Lepidoptera: Geometridae) occurs in late autumn. Late‐season flight is a result of a prolonged pupal period. Potential evolutionary explanations for this phenological pattern are evaluated. 2. In a laboratory rearing, there was a weak correlation between pupation date and the time of adult emergence. A substantial genetic difference in pupal period was found between two geographic populations. Adaptive evolution of eclosion time can thus be expected. 3. Metabolic costs of a prolonged pupal period were found to be moderate but still of some ecological significance. Pupal mortality is likely to form the main cost of the prolonged pupal period. 4. Mortality rates of adults, exposed in the field, showed a declining temporal trend from late summer to normal eclosion time in autumn. Lower predation pressure on adults may constitute the decisive selective advantage of late‐season flight. It is suggested that ants, not birds, were the main predators responsible for the temporal trend. 5. Egg mortality was estimated to be low; it is thus unlikely that the late adult period is selected for to reduce the time during which eggs are exposed to predators. 6. In a laboratory experiment, oviposition success was maximal at the time of actual flight peak of E. autumnata, however penalties resulting from sub‐optimal timing of oviposition remained limited.     

Gradients in maize roots: local elongation and pH

The elongation rate, the gradient of the local elongation rate and the surface pH of maize roots were measured over 12 h. A data bank was constituted by storing these values. By sorting these results on the basis of different elongation rates, different classes of root were obtained. Two classes were chosen: the low-growth roots and the high-growth roots. The mean growth of these two root classes was stable with time and differed significantly from one another. The surface pH of the elongation zone was the same for the roots of these two classes, but the roots selected for their higher growth rate had a larger acid efflux in this zone.     

Estimates of protozoan- and viral-mediated mortality of bacterioplankton in Lake Bourget (France)

1. We performed three, 1‐week in situ experiments in March‐April (expt 1), May (expt 2) and August (expt 3) 2003 in order to assess protozoan and virus‐induced mortality of heterotrophic bacteria in a French lake. Viral and bacterial abundances were obtained using flow cytometry (FCM) while protozoa were counted using epifluorescence microscopy (EFM). 2. A dilution approach, applied to pretreated grazer‐free samples, allowed us to estimate that viral lysis could be responsible for 60% (expt 1), 35% (expt 2) and 52% (expt 3) of daily heterotrophic bacterial mortality. Flagellate (both mixotrophic and heterotrophic) grazing in untreated samples, was responsible for 56% (expt 1), 63% (expt 2) and 18% (expt 3) of daily heterotrophic bacteria removal. 3. These results therefore suggest that both viral lysis and flagellate grazing had a strong impact on bacterial mortality, and this impact varied seasonally. 4. From parallel transmission electron microscopy (TEM) analysis, we found that the burst size (i.e. the number of viruses potentially released per lysed cell) ranged from nine to 25 (expt 1), 10 to 35 (expt 2) and eight to 25 (expt 3). The percentage of infected heterotrophic bacteria was 5.7% (expt 1), 3.4% (expt 2) and 5.7% (expt 3) so that the calculated percentage of bacterial mortality induced by viruses was 6.3% (expt 1), 3.7% (expt 2) and 6.3% (expt 3). 5. It is clear that the dilution‐FCM and TEM methods yielded different estimates of viral impact, although both methods revealed an increased impact of viruses during summer.     

Radioiodinated surface proteins of rabbit trophectoderm cells

Summary We have previously used surface iodination to discriminate between the protein patterns of epithelial cell surfaces in uteri of rabbits receptive (Day 6.5) or nonreceptive (Day 4) to nidation (Ricketts et al. 1984). In this paper, we describe application of the same technique to the trophoblastic surface of rabbit blastocysts collected on the same days of pregnancy. Analysis of labelled proteins by polyacrylamide-gel electrophoresis under denaturing conditions did not reveal qualitative differences between the two days of pregnancy. Scanning densitometry was used to quantitate the area under each protein peak on an autoradiogram; these areas were used as variables in statistical analysis of the protein pattern of individual animals. Quantitative differences between the protein patterns of the two surfaces were detected by canonical variate analysis of the pattern of relative areas of labelled protein peaks. In proteins separated on 7.5% gels, this statistical analysis correctly assigned blastocysts from 8 out of 10 animals to one of two groups according to day of pregnancy. The discrimination was not statistically significant, however, in protein patterns on 12.5% gels, used to give better separation in the lower range of molecular weights. The same analysis in the uterus unequivocally separated the surface iodination patterns from these same days of pregnancy. Thus the changes detected by surface iodination appear to be less pronounced on the trophectoderm than on the uterine epithelium in relation to the time of ovoimplantation.     

Tuning cellular responses to BMP-2 with material surfaces

Bone morphogenetic protein 2 (BMP-2) has been known for decades as a strong osteoinductive factor and for clinical applications is combined solely with collagen as carrier material. The growing concerns regarding side effects and the importance of BMP-2 in several developmental and physiological processes have raised the need to improve the design of materials by controlling BMP-2 presentation. Inspired by the natural cell environment, new material surfaces have been engineered and tailored to provide both physical and chemical cues that regulate BMP-2 activity. Here we describe surfaces designed to present BMP-2 to cells in a spatially and temporally controlled manner. This is achieved by trapping BMP-2 using physicochemical interactions, either covalently grafted or combined with other extracellular matrix components. In the near future, we anticipate that material science and biology will integrate and further develop tools for in vitro studies and potentially bring some of them toward in vivo applications.     

Zosteric acid and salicylic acid bound to a low density polyethylene surface successfully control bacterial biofilm formation

The active moieties of the anti-biofilm natural compounds zosteric (ZA) and salicylic (SA) acids have been covalently immobilized on a low density polyethylene (LDPE) surface. The grafting procedure provided new non-toxic eco-friendly materials (LDPE-CA and LDPE-SA) with anti-biofilm properties superior to the conventional biocide-based approaches and with features suitable for applications in challenging fields where the use of antimicrobial agents is limited. Microbiological investigation proved that LDPE-CA and LDPE-SA: (1) reduced Escherichia coli biofilm biomass by up to 61% with a mechanism that did not affect bacterial viability; (2) significantly affected biofilm morphology, decreasing biofilm thickness, roughness, substratum coverage, cell and matrix polysaccharide bio-volumes by >80% and increasing the surface to bio-volume ratio; (3) made the biofilm more susceptible to ampicillin and ethanol. Since no molecules were leached from the surface, they remained constantly effective and below the lethal level; therefore, the risk of inducing resistance was minimized.