Limited proteolysis patterns of the B chain of insulin.

The oxidized B chain of insulin was used as a simple model for further consideration of limited proteolysis with low substrate:enzyme ratios. With low B chain:trypsin ratios, the ordinarily slower cleavage rate of the -Lys₂₉-Ala₃₀ bond essentially equaled the cleavage saturation rate of the -Arg₂₂-Gly₂₃ bond. This led to the disappearance of octapeptide which ordinarily forms most rapidly. Heptapeptide and alanine, formed mainly by cleavage of the octapeptide, decreased somewhat at high enzyme relative levels. Trypsin added to B chain formed a single chromatographic peak.     

Molar enamel thickness in European Miocene and extant hominoidea

Based on a roentgenographic analysis, the molar enamel of certain European Miocene dryopithecines is absolutely thick (r=1.03–1.30 mm in thickness); the molar enamel of certain European pliopithecines is thin (r=0.32–0.82 mm thick). The rank order for enamel thickness in extant hominoids (from thickest to thinnest) is confirmed to beHomo, Pongo, Gorilla, Pan, andHylobates. There is a great deal of enamel thickness variability within the great ape sample. Extant analogues suggest that dryopithecines were probably adapted to a frugivorous/gramnivorous dietary regimen, while pliopithecines were probably better suited to folivory.     

Computational sequence analysis of matrix metalloproteinases

Matrix metalloproteinases (MMP) play a cardinal role in the breakdown of extracellular matrix involved in a variety of biological and pathological processes. Research on MMPs has classified and characterized these enzymes according to their matrix substrate specificity, gene and protein domain structure, and regulation of activity and expression. However, the discovery of new MMPs has introduced a need for a more comprehensive and systematic method of classification and quantitative comparison of known and newly discovered members. This study compiles a sequence alignment, constructs a dendrogram, and calculates physical data and homology percentage assignments in order to obtain further insight into MMP structure-function relationships. Thorough analysis of MMP primary sequence domains, physical data patterns, and statistical analysis of sequence homology yields higher resolution in the similarities and differences that group MMP members.     

Brief communication: Possible third molar impactions in the hominid fossil record

Impacted third molars affect 15%–20% of modern Americans and Western Europeans. In contrast, third molar impactions have not been reported in the early hominid fossil record. It is uncertain whether the lack of reports reflects an absence of impactions or a failure to recognize them. This communication is intended to raise awareness of the possibility of impactions by describing the appearance of impacted teeth and by noting two possible instances of impaction in early hominids. Specifically, the mandibular third molars of the Sterkfontein specimen, STS52b (Australopithecus africanus), and the left maxillary third molar of the Lake Turkana specimen, KNM-WT17400 (Australopithecus boisei), are positioned in a manner which suggests that they would not have erupted normally. Both specimens also exhibit strong crowding of the anterior dentition, providing further support for the view that these individuals lacked sufficient space for normal eruption of the third molars. Other published reports of dental crowding in the hominid fossil record are noted, and it is suggested that more attention be paid to dental impaction and dental crowding in hominid evolution. © 1993 Wiley-Liss, Inc.     

Characterization of New Highly Virulent German Isolates of Bremia lactucae and Efficiency of Resistance in Wild Lactuca spp. Germplasm

Four German isolates (FS1, SR2, SAW1 and DEG2) of Bremia lactucae originating from lettuce cultivars with R‐factors R18 and Dm6 + R36 were used for detailed characterization of virulence factors (v‐factors) and for the study of the resistance efficiency in wild Lactuca spp. germplasm. The highest complexity of v‐phenotype was recognized in isolate DEG2, which overcomes resistance in cv. Mariska (R18) and line CS‐RL (L. serriola × L. sativa, R18 + ?), until now known as resistant to all known races of B. lactucae in Europe. However, some sparse sporulation also occurred on cv. Titan (Dm6 + R36). The isolates SR2 and SAW1 overcome the resistance based on the gene R36, but are avirulent to R18. The v‐phenotype of SR2 is highly complex with the most important v‐factors being present except for v14 and v18. The isolate FS1 is the first in Germany originating from a cultivar with R18 (cv. Samourai). The search for efficient sources of resistance in 64 accessions of 11 wild Lactuca spp. and primitive forms of L. sativa showed broad variation in accession–isolate interactions. Expression of race‐specific resistance in wild Lactuca spp. (L. serriola, L. viminea, L. virosa) was recorded frequently. Lactuca indica and L. saligna could be considered as the most efficient sources of resistance against isolates FS1, SR2 and SAW1. The isolate DEG2 showed the highest level of virulence. On seedlings of L. saligna, which is considered as a most important source of resistance against B. lactucae, there was frequently recorded limited sporulation, however this response cannot be considered as a susceptible. Except for some L. saligna accessions (CGN 05310 and CGN 05315), the resistance to all studied isolates was only observed in one accession of L. serriola (PI 253467).     

Optimization of L-malic acid production by Aspergillus flavus in a stirred fermentor

Effects of various nutritional and environmental factors on the accumulation of organic acids (mainly L-malic acid) by the filamentous fungus Aspergillus flavus were studied in a 16-L stirred fermentor. Improvement of the molar yield (moles acid produced per moles glucose consumed) of L-malic acid was obtained mainly by increasing the agitation rate (to 350 rpm) and the Fe(z+) ion concentration (to 12 mg/L) and by lowering the nitrogen (to 271 mg/L) and phosphate concentrations (to 1.5 mM) in the medium. These changes resulted in molar yields for L-malic acid and total C(4) acids (L-malic, succinic, and fumaric acids) of 128 and 155%, respectively. The high molar yields obtained (above 100%) are additional evidence for the operation of part of the reductive branch of the tricarboxylic acid cycle in L-malic acid accumulation by A. flavus. The fermentation conditions developed using the above mentioned factors and 9% CaCO(3) in the medium resulted in a high concentration (113 g/L L-malic acid from 120 g/L glucose utilized) and a high overall productivity (0.59 g/L h) of L-malic acid. These changes in acid accumulation coincide with increases in the activities of NAD(+)-malate dehydrogenase, fumarase, and citrate synthase.     

Molecular Characteristics of Bovine Serum Albumin-Dextran Conjugates

Bovine serum albumin (BSA)-dextran conjugates were prepared by using the Maillard reaction; depending on the ratio of dextran to BSA used, about 0.5–1 mol of dextran could be bound to 1 mol of native BSA. SDS–PAGE patterns revealed that BSA and dextran had been covalently bonded. Structural analyses by fluorescence spectroscopy and circular dichroism indicated that the BSA surface in each conjugate was covered with dextran without any great disruption of the native conformation. The conjugates could be grouped into two fractions on the basis of the weight-average molecular mass measured: the main fraction at 1.95–2.35×10⁵ g/mol and a less-abundant fraction with aggregates greater than 1.50×10⁶ g/mol. High-performance size-exclusion chromatography in conjunction with multi-angle laser light scattering detection revealed that the BSA-dextran conjugates prepared by using the Maillard reaction had various molar masses and radii.     

Robust Swing‐Structured Triboelectric Nanogenerator for Efficient Blue Energy Harvesting

Ocean wave energy is a promising renewable energy source, but harvesting such irregular, “random,” and mostly ultra‐low frequency energies is rather challenging due to technological limitations. Triboelectric nanogenerators (TENGs) provide a potential efficient technology for scavenging ocean wave energy. Here, a robust swing‐structured triboelectric nanogenerator (SS‐TENG) with high energy conversion efficiency for ultra‐low frequency water wave energy harvesting is reported. The swing structure inside the cylindrical TENG greatly elongates its operation time, accompanied with multiplied output frequency. The design of the air gap and flexible dielectric brushes enable mininized frictional resistance and sustainable triboelectric charges, leading to enhanced robustness and durability. The TENG performance is controlled by external triggering conditions, with a long swing time of 88 s and a high energy conversion efficiency, as well as undiminished performance after continuous triggering for 4 00 000 cycles. Furthermore, the SS‐TENG is demonstrated to effectively harvest water wave energy. Portable electronic devices are successfully powered for self‐powered sensing and environment monitoring. Due to the excellent performance of the distinctive mechanism and structure, the SS‐TENG in this work provides a good candidate for harvesting blue energy on a large scale.     

Zinc nutritional status influences ZnT1 and ZIP4 gene expression in children with a high risk of zinc deficiency

IntroductionSubclinical deficiency of zinc is associated with impairment of immune system function, growth, and cognitive development in children. Although plasma zinc is the best available biomarker of the risk of zinc deficiency in populations, its sensitivity for early detection of deficiency is limited. Therefore, we aimed to investigate zinc deficiency among preschool children and its relationship with whole blood gene expression of zinc transporters ZIP4 and ZnT1.Material and methodsThis cross-sectional study included 139 children aged 32–76 months enrolled in philanthropic day-care centers. We performed an anthropometric evaluation, weighed food record and dietary record for dietary assessment, blood sample collection for zinc, and whole blood gene expression analyses of ZnT1 (SLC30A1) and ZIP4 (SLC39A4).ResultsZinc deficiency was observed in 26.6 % of the children despite adequate zinc intake and a phytate:zinc molar ratio < 18. Usual zinc intake did not affect whole blood gene expression of zinc transporters, but zinc status influenced ZnT1 and ZIP4 whole blood mRNA. Children with zinc deficiency exhibited 37.1 % higher ZnT1 expression and 45.3 % lower ZIP4 expression than children with adequate zinc (p < 0.05).ConclusionChildren with plasma zinc deficiency exhibited higher expression of ZnT1 and lower expression of ZIP4 in whole blood mRNA, reinforcing the existence of strong regulation of mineral homeostasis according to the nutritional status, indicating that this analysis may be useful in the evaluation of dietary interventions.     

The Slice Culture Method for Following Development of Tooth Germs In Explant Culture

Explant culture allows manipulation of developing organs at specific time points and is therefore an important method for the developmental biologist. For many organs it is difficult to access developing tissue to allow monitoring during ex vivo culture. The slice culture method allows access to tissue so that morphogenetic movements can be followed and specific cell populations can be targeted for manipulation or lineage tracing.In this paper we describe a method of slice culture that has been very successful for culture of tooth germs in a range of species. The method provides excellent access to the tooth germs, which develop at a similar rate to that observed in vivo, surrounded by the other jaw tissues. This allows tissue interactions between the tooth and surrounding tissue to be monitored. Although this paper concentrates on tooth germs, the same protocol can be applied to follow development of a number of other organs, such as salivary glands, Meckel''s cartilage, nasal glands, tongue, and ear.