环氧树脂固定化的Bacillus sp.DL-2胞外蛋白酶在拆分(±)-乙酸苏合香酯中的应用

环氧基是一个非常活跃的基团,它能与酶、蛋白质和核酸等生物分子发生反应形成共价键,有利于生物分子的固定化。经共价结合法固定化的酶其稳定性及重复使用性可得到显著提高。用环氧树脂ES-103B为载体采用共价结合法对海洋细菌Bacillus sp. DL-2的胞外蛋白酶进行固定化,经过单因素实验优化条件得出最优固定化条件为:p H 8. 0的胞外蛋白酶溶液,25 g/L的ES-103B,45℃下反应8h。采用此最优条件下的固定化酶拆分(±)-乙酸苏合香酯制备出了e. e. p=97. 5%的(R)-1-苯乙醇(产率为45. 0%)和e. e. s=99. 2%的(S)-乙酸苏合香酯(产率为83. 9%)。该固定化酶拆分(±)-乙酸苏合香酯在重复使用8次后制备出的(R)-1-苯乙醇的e. e. p仍大于90%,且固定化胞外蛋白酶在4℃下具有较好的储存稳定性。     

The effect of antibiotics on the photocycle and protoncycle of purple membrane suspensions

The interrelation was studied between the phototransient absorbing maximally at 412 nm (M₄₁₂) and light-induced proton release under steady-state conditions in aqueous suspensions of ‘purple membrane’ derived from Halobacterium halobium. The decay of M₄₁₂ was slowed down by the simultaneous application of the ionophoric antibiotics valinomycin and beauvericin. The former had only slight activity alone and the latter was effective only in conjunction with valinomycin. The steady-state concentration of M₄₁₂ which was formed on illumination was a direct function of the concentration of valinomycin. Maximum stabilization of M₄₁₂ was obtained when the valinomycin was approximately equimolar with the bacteriorhodopsin. Addition of salts to the medium increased the number of protons released per molecule of M₄₁₂ without affecting the level of M₄₁₂ which was produced by continuous illumination. The effectiveness of the salts in this respect depended on the nature of the cation. Ca²⁺ and their antagonists La³⁺ and ruthenium red were found to have especially high affinity for the system. The extent of light-induced acidification could not be enhanced by increasing the pH of the medium from 6.5 to 7.8. The possible mechanism of action of the ionophores and of the cations on the photocycle and on the proton cycle is discussed.     

Preparation and Evaluation of Differently Sulfonated Styrene–Divinylbenzene Cross-linked Copolymer Cationic Exchange Resins as Novel Carriers for Drug Delivery

The differently sulfonated styrene–divinylbenzene cross-linked copolymer cationic exchange resins were prepared by oil-in-water polymerization and varied degrees of sulfonation. Several characteristics of the obtained resins were evaluated, i.e., Fourier transform infrared spectra, the ion-exchange capacity, microscopic morphology, size, and swelling. The resin characteristics were altered in relation to the degree of sulfonation, proving that differently sulfonated resins could be prepared. The behavior of chlorpheniramine (CPM) loading and in vitro release in the USP simulated gastric (SGF) and intestinal fluids (SIF) of the obtained resins were also evaluated. The CPM loaded in the resinates (drug-loaded resins) increased with the increasing degree of sulfonic group and hence the drug binding site in the employed resins. The CPM release was lower from the resins with the higher degree of sulfonic group due to the increase in the diffusive path depth. The CPM release was obviously lower in SGF than SIF because CPM, a weak base drug, ionized to a greater extent in SGF and then preferred binding with rather than releasing from the resins. In conclusion, the differently sulfonated resins could be utilized as novel carriers for drug delivery.     

X-ray absorption spectroscopy of selenium-containing amino acids

Received: 2 April 1999 / Accepted: 17 September 1999     

Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Computational Oral Absorption Simulation for Low‐Solubility Compounds

Bile micelles play an important role in oral absorption of low‐solubility compounds. Bile micelles can affect solubility, dissolution rate, and permeability. For the pH–solubility profile in bile micelles, the Henderson–Hasselbalch equation should be modified to take bile‐micelle partition into account. For the dissolution rate, in the Nernst–Brunner equation, the effective diffusion coefficient in bile‐micelle media should be used instead of the monomer diffusion coefficient. The diffusion coefficient of bile micelles is 8‐ to 18‐fold smaller than that of monomer molecules. For permeability, the effective diffusion coefficient in the unstirred water layer adjacent to the epithelial membrane, and the free fraction at the epithelial membrane surface should be taken into account. The importance of these aspects is demonstrated here using several in vivo and clinical oral‐absorption data of low‐solubility model compounds. Using the theoretical equations, the food effect on oral absorption is further discussed.     

Role of Activity of Gastrointestinal Microflora in Absorption of Calcium and Magnesium in Rats Fed β1-4 Linked Galactooligosaccharides

Rats fed a diet containing β1-4 linked galactooligosaccharides (GOS) (5 g/100 g of diet) absorbed calcium and magnesium more efficiently than those fed the control diet. However, the increment obtained through GOS-feeding was reduced by neomycin sulfate 0.67 g/100 g of diet). Since the decrease in cecal pH in rats fed GOS was suppressed by neomycin-feeding, bacterial action in the digestive tract was considered to be reduced by neomycin-feeding. Our findings suggest that the action of intestinal bacteria is necessary for the effects of GOS.     

Inter-chromophore interactions in pigment-modified and dimer-less bacterial photosynthetic reaction centers

The magnitudes of inter-chromophore interactions in bacterial photosynthetic reaction centers are investigated by measuring absorption and Stark spectra of reaction centers in which monomeric chromophores are modified and in a novel triplet mutant which lacks the special pair. The circular dichroism spectrum of the triple mutant reaction center was also measured. Only small changes in the spectroscopic properties are observed, as has also been found for several types of reaction centers in which the absorption or chemical properties of a chromophore are altered by site-specific mutations. We conclude that the electronic absorption, circular dichroism and Stark features of the special pair and the monomeric chromophores in the reaction center are relatively insensitive to inter-chromophore interactions.