A Microplate Assay to Assess Chemical Effects on RBL-2H3 Mast Cell Degranulation: Effects of Triclosan without Use of an Organic Solvent

Mast cells play important roles in allergic disease and immune defense against parasites. Once activated (e.g. by an allergen), they degranulate, a process that results in the exocytosis of allergic mediators. Modulation of mast cell degranulation by drugs and toxicants may have positive or adverse effects on human health. Mast cell function has been dissected in detail with the use of rat basophilic leukemia mast cells (RBL-2H3), a widely accepted model of human mucosal mast cells^3-5. Mast cell granule component and the allergic mediator β-hexosaminidase, which is released linearly in tandem with histamine from mast cells⁶, can easily and reliably be measured through reaction with a fluorogenic substrate, yielding measurable fluorescence intensity in a microplate assay that is amenable to high-throughput studies¹. Originally published by Naal et al.¹, we have adapted this degranulation assay for the screening of drugs and toxicants and demonstrate its use here.Triclosan is a broad-spectrum antibacterial agent that is present in many consumer products and has been found to be a therapeutic aid in human allergic skin disease^7-11, although the mechanism for this effect is unknown. Here we demonstrate an assay for the effect of triclosan on mast cell degranulation. We recently showed that triclosan strongly affects mast cell function². In an effort to avoid use of an organic solvent, triclosan is dissolved directly into aqueous buffer with heat and stirring, and resultant concentration is confirmed using UV-Vis spectrophotometry (using ε₂₈₀ = 4,200 L/M/cm)¹². This protocol has the potential to be used with a variety of chemicals to determine their effects on mast cell degranulation, and more broadly, their allergic potential.     

Microplates as a microreactor platform for microalgae research

High‐throughput platforms for microalgae screening are not yet commercially available. In this study, the feasibility of 96‐well microplates was analyzed for microalgae research. Equivalence among wells, as culture microreactors, was investigated in controlled high CO₂ conditions. Specific growth rates of two microalgae species, Scenedesmus sp. UTEX1589 and an environmental isolate, were significantly higher in border wells than in internal positions. Furthermore, growth rate gradients analyzed as contours throughout the platform were observed for Scenedesmus sp. However, the output variable exhibited high precision associated with a low coefficient of variation (CV), between 6.8 and 7.8%. In a demonstrative experiment to determine the effect of culture media dilution on six microalgae species, treatments were randomized in the central subset of a microplate. Results were consistent and statistically sound (CV 9.4–12.9%), and showed that microalgae species could grow with no detrimental effect in 50% (v/v) dilution of the culture medium. Provided border wells exclusion and a randomized design, 96‐well microplates are a practical and statistical robust platform for microalgae research. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:638–644, 2013     

Development of a micelle‐enhanced high‐throughput fluorometric method for determination of niclosamide using a microplate reader

The present paper describes the development and validation of a simple and sensitive micelle‐enhanced high‐throughput fluorometric method for the determination of niclosamide (NIC) in 96‐microwell plates. The proposed method is based on the reduction of the nitro group of niclosamide to an amino group using Zn/HCl to give a highly fluorescent derivative that was developed simultaneously and measured at λ_em 444 nm after excitation at λ_ex 275 nm. Tween‐80 and carboxymethylcellulose (CMC) have been used as fluorescence enhancers and greatly enhanced the fluorescence by factors of 100–150%. The different experimental conditions affecting the fluorescence reaction were carefully investigated and optimized. The proposed method showed good linearity (r²≥ 0.9997) over the concentration ranges of 1–5 and 0.5–5 μg/ml with lower detection limits of 0.01 and 0.008 μg/ml and lower quantification limits of 0.04 and 0.03 μg/ml on using Tween‐80 and or CMC, respectively. The developed high‐throughput method was successfully applied for the determination of niclosamide in both tablets and spiked plasma. The capability of the method for measuring microvolume samples made it convenient for handling a very large number of samples simultaneously. In addition, it is considered an environmentally friendly method with lower consumption of chemicals and solvents.     

酶标仪分光光度法在微生物耐性研究上的应用

微生物在环境中的耐性是该微生物在相应环境发挥作用的重要基础。为了获得一种用于微生物耐性分析的快速简便方法,传统平板分离法和酶标仪分光光度法被用于评估其在细菌和链霉菌紫外耐受水平检测中的差异,并分析了酶标仪分光光度法在微生物其他耐性水平检测中的适用性。结果显示,两种检测方法均能体现细菌和链霉菌对紫外线的耐受水平,前者经过稀释、涂布、培养、菌落计数,获得的是菌株在紫外线照射后的存活浓度,而后者经过接种96孔培养板、培养、吸光度检测,获得的是菌株经紫外线照射后的生长曲线,并从生长曲线获知菌株的生长速率、增殖能力等信息。此外,酶标仪分光光度法同样适用于细菌对pH和盐的耐受水平分析,对于链霉菌耐受性分析有一定的适用性。酶标仪法除了能获得与平板分离法相似的耐性水平检测外,还能获得菌株在不同耐性水平上的增殖潜力,且在操作上比平板分离法省时、省力,可用于微生物耐性分析、高通量筛选等研究工作。     

A fluorescence microplate assay using yopro-1 to measure apoptosis: application to HL60 cells subjected to oxidative stress

A new one-step labeling procedure using the membrane permeant fluorescent probe yopro-1 in association with fluorescence microtitration for the rapid determination of apoptosis is reported. Programmed cell death was induced by the pro-apoptotic agents etoposide and staurosporine, and measured in nonadherent HL60 cells and adherent phorbol 12-myristate 13-acetate (PMA)-treated HL60 cells. Cell viability was controlled by trypan blue exclusion and calcein-AM staining. To confirm results of fluorescence microplate assay, apoptosis was measured by flow cytometry analysis using the same fluorescent probe, and results showed corresponding data between both procedures. Development of apoptosis was confirmed by the presence of PARP (poly(ADP-ribose) polymerase cleavage and nuclear DAPI (4,6-diamidino-2-phenylindole) staining, two well-known methods used to investigate apoptosis. The fluorescence microplate assay was also applied to measure apoptosis in cells exposed to an oxidative stress induced by tert-butylhydroperoxide (t-BHP), and results confirmed the potential of the fluorescence microplate assay in measuring events of apoptosis, especially in adherent, cultured, living cells.     

The dynamic distribution of fluoro-gold and its interrelation with neural nitric oxide synthase following intracerebroventricular injection into rat brain

We mapped the dynamic distribution of fluoro-gold (FG) within rat brain following intracerebroventricular (icv) injection into the lateral ventricle and observed its interrelation with neural nitric oxide synthase (nNOS) using FG fluorescent microphotography combined with nNOS immunohistochemistry. We also detected the amount of icv administered FG entering the peripheral circulation using a fluorescence microplate assay. The degree of periventricular penetration of FG was significantly increased over time. At 2 min after icv injection, FG primarily labeled the choroid plexus in the lateral and third ventricles, with limited penetration into the ependyma and the subependyma of the same ventricles. Some FG/nNOS-double labeled cerebrospinal fluid-contacting neurons were observed in these ventricles as well. At 15 and 30 min, FG penetrated mainly into forebrain ventricular organs and parenchymal structures. Many FG/nNOS double labeled neurons were found at each of these sites. In addition, at 30 min intense FG labeling was found in the hypophysis, while limited periventricular penetration of FG was detected in the hindbrain circumventricular areas. In the peripheral circulation, a low concentration of FG was detected 2 min after icv injection. The concentration increased slowly, peaked at 20 min, then gradually decreased until the end of the experiment at 30 min. These findings indicate that dynamic penetration of icv administrated agents into the periventricular tissues and peripheral circulation should be considered when designing icv experiments.     

High-throughput evaluation of pulmonary surfactant adsorption and surface film formation

The assessment of new therapeutic strategies to cure surfactant-associated lung disorders would greatly benefit from assay systems allowing routine evaluations of surfactant functions. We present a method to measure surfactant adsorption kinetics into interfacial air-liquid interfaces based on fluorescence microplate readers. The principle of measurement is simple, robust, and reproducible: Wells of a microtiter plate contain an aqueous solution of a light-absorbing agent. Fluorescence is excited and collected from the top of the wells so that fluorescently labeled surfactant injected into the bulk can be detected only once adsorbed into the air-liquid interface. Mass transfer from the bulk to the interface is achieved by orbital shaking implemented in the plate reader instrument. The method has been tested and validated by using phospholipids or surfactants of different origins, by using albumin as surfactant inhibitor, and by comparison of results with Wilhelmy balance measurements. The method is suited for implementation in high-throughput screening routines for conditions affecting, or improving, surfactant film formation. In contrast to surface tension measurements, our method gives a direct readout of the amount of surfactant adsorbing into the interface, including the functionally important amount of material firmly associating with the interfacial film.     

Commercially available luminometers and imaging devices for low-light level measurements and kits and reagents utilizing bioluminescence or chemiluminescence: Survey update 5

This survey was compiled in July 1997 and includes products not covered in the luminometer survey (Jan 1992: Stanley PE, J Biolumin Chemilumin 1992; 7:77–108 and 7:157–69), kits and reagent survey (Nov 1992; Stanley PE, J Biolumin Chemilumin 1993; 8:51–63), update 1 (June 1993: luminometers, kits and reagents, Stanley PE, J Biolumin Chemilumin 1993; 8:237–240) and update 2 (Dec 1993: luminometers, kits and reagents, Stanley PE, J Biolumin Chemilumin 1994; 9:51–3) and update 3 (Feb 1994: luminometers, kits and reagents, Stanley PE, J Biolumin Chemilumin 1994; 9:123–5) and update 4 (June 1996: Stanley PE, J Biolumin Chemilumin 1996; 11:175–91). Technical details are provided together with company address and contact information including email and website where known. Items include: Luminometers, radiometers, low-light imaging, CCD cameras, immunoassays, ATP rapid microbiology, hygiene monitoring, molecular probes, labels, nucleic acid hybridization, reporter genes. © 1997 John Wiley & Sons, Ltd.