排序方式: 共有111条查询结果,搜索用时 15 毫秒
1.
C. Ferreira R. Rosmaninho M. Simões M. C. Pereira M. M.S.M. Bastos O. C. Nunes 《Biofouling》2013,29(2):205-212
This study presents a new technological approach to minimize the use of antimicrobial (AMB) agents and their deleterious effects, based on the principle of drug-delivery systems whereby the AMB chemicals are transported on microparticles. The efficacy of microparticles carrying the quaternary ammonium compound (QAC), benzyldimethyldodecyl ammonium chloride (BDMDAC), was assessed against Pseudomonas fluorescens in both the planktonic and the biofilm state. The microparticles were prepared using a layer-by-layer (LBL) self-assembly technique. Oppositely charged molecules of polyethyleneimine (PEI), sodium polystyrene sulfonate (PSS), and BDMDAC were assembled on polystyrene (PS) cores. BDMDAC-coated particles were observed by CryoSEM and their composition analyzed by X-ray microanalysis. Zeta potential measurements indicated that changes in surface charge were compatible with a BDMDAC/particle interaction. This biocidal carrier structure had significant stability, verified by the release of only 15% of the BDMDAC when immersed in water for 18 months. Biocidal carrier activity was evaluated by determining the survival ratio of P. fluorescens planktonic and biofilm cells after different exposure periods to BDMDAC-coated particles. Tests with biofilm cells were also performed with the free QAC. An efficient AMB effect (minimum bactericidal concentration) against suspended cells was found for a concentration of 9.2 mg l?1 of BDMDAC on coated particles after incubation for 30 min and 6.5 mg l?1 of BDMDAC on coated particles after 60 min. Exposure of biofilms to PS-PEI/PSS/BDMDAC (0.87 mg l?1) resulted in a decrease in viability of 60.5% and 66.5% of the total biofilm population for 30 and 60 min exposure times, respectively. Exposure for 60 min to 6.33 mg l?1 and 11.75 mg l?1 of BDMDAC in PS-PEI/PSS/BDMDAC particles promoted inactivation of 80.6% and 87.2% of the total population, respectively. The AMB effects obtained with the application of free BDMDAC were statistically similar to those promoted by the application of BDMDAC coated particles. The overall results indicate that this novel AMB strategy has potential for the control of microbial growth of planktonic cells and biofouling. Moreover, the technique allows the reuse of AMB molecules and consequently reduces the environmental risks associated with excessive use of AMB agents, thereby providing real benefits to public health. 相似文献
2.
3.
Solvent extraction (or evaporation from a W(1)/O/W(2)-dispersion), coacervation, and spray drying methods are commonly employed to encapsulate protein drugs in polymeric microparticles for sustained delivery applications. To overcome the limitations of these methods, a novel electrospray method was developed to encapsulate a model protein drug-bovine serum albumin (BSA) in biodegradable polymeric microparticles and examine the feasibility of the process in not denaturing the protein. Microparticles of approximately 20 microm diameter with corrugated surfaces and smooth surfaces were observed by scanning electron microscope. Confocal laser scanning microscope images showed that BSA was distributed evenly in microparticles. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was employed to investigate the protein integrity of BSA released from the polymer matrix after 38 days. No protein degradation was observed during the 38 days release. The secondary structure of released BSA was characterized by Fourier transform infrared (FTIR) and circular dichroism (CD), which suggested that the released BSA was almost identical to native BSA. The encapsulation efficiency could reach 76% by adjusting the amount of the additive Pluronic F127 and processing parameters. The release profile could be tailored by the fabrication process and the sustained release of BSA could endure for more than 1 month. More than 80% of the bioactivity of BSA (evaluated by BSA ELISA kit) could be maintained after releasing from polymer matrix. Findings of the present study demonstrate that this novel electrospray method is a promising approach to encapsulate bioactive materials such as proteins, enzymes, antibiotics, and DNA fragments in biodegradable polymeric particles. 相似文献
4.
Vasily N. Danilevich Andrey L. Mulyukin Andrey V. Machulin Vladimir V. Sorokin Sergey A. Kozlov 《Journal of biomolecular structure & dynamics》2019,37(4):918-930
Our previous studies demonstrated the formation of structurally diverse DNA-containing microparticles (DNA MPs) in PCR with Mg-pyrophosphate (MgPPi) as the structure-forming component. These DNA MPs were referred to major structural types: microdisks (2D MPs) with nanometer thickness and 3D MPs with sophisticated morphology and constructed from intersecting disks and their segments. Little is known about factors that influence both the morphology and size of DNA MPs, and the present study was aimed at fulfilling this gap. We showed that the addition of Mn2+ cations to PCR mixtures caused the profound changes in MPs morphology, depending on DNA polymerase used (KlenTaq or Taq). Asymmetric PCR with 20-fold decrease in the concentration of one of two primers facilitated the predominant formation of microdisks with unusual structure. The addition of 1 mM Na-pyrophosphate to PCR mixtures with synthesized DNA and subsequent thermal cycling (10–15 cycles) were optimal to produce microdisks or nanometer 3D particles. Using electron microscopy, we studied also the structure of inorganic micro- and nanoparticles from MgPPi, formed during multiple heating and cooling cycles of a mixture of Mg2+ and Na-pyrophosphate in various regimes. Also, we found the conditions to yield planar (Mg·Mn)PPi nanocrystals (diameter ~100 nm and thickness ~10 nm) which efficiently adsorbed exogenous DNA. These inorganic nanoparticles are promising for DNA delivery in transfection studies. Mechanisms to be involved in structural modifications of MPs and perspectives of their practical application are discussed. 相似文献
5.
Sanna V Kirschvink N Gustin P Gavini E Roland I Delattre L Evrard B 《AAPS PharmSciTech》2004,5(2):17-23
The purpose of this research was to investigate the effects of processing conditions on the characteristics of solid lipid
microparticles (SLM) with a potential application as carriers for pulmonary administration. Compritol (5.0% wt/wt) SLM dispersions
were prepared by rotor-stator homogenization, at different surfactant concentrations and emulsification times. The SLM were
characterized, in terms of morphology and size, after lyophilization and sterilization by autoclaving process. In vivo assessment
was carried out in rats by intratracheal instillation of either placebo or SLM dispersion, and by bronchoalveolar lavage for
cytological analysis. Mean particle size of 4 to 5 μm was achieved using 0.3% and 0.4% (wt/wt) of emulsifier (Poloxamer 188)
and emulsification times of 2 and 5 minutes. The particles showed spherical shape and smooth surface. The morphology of microparticles,
the size, and the size distribution were not substantially modified after lyophilization and sterilization. Total cell counts
showed no significant differences between placebo and SLM 0.5% or 2.5% groups. Regarding cytology, percentage of polymorphonuclear
neutrophils and macrophages did not significantly differ between groups. These results suggest that a single intratracheal
administration of the SLMs does not induce a significant inflammatory airway response in rats and that the SLMs might be a
potential carrier for encapsulated drug via the pulmonary route. 相似文献
6.
The objective of this study was to prepare and characterize microparticles of budesonide alone and budesonide and polylactic acid (PLA) using supercritical fluid (SCF) technology. A precipitation with a compressed antisolvent (PCA) technique employing supercritical CO2 and a nozzle with 100-μm internal diameter was used to prepare microparticles of budesonide and budesonide-PLA. The effect of various operating variables (temperature and pressure of CO2 and flow rates of drug-polymer solution and/or CO2) and formulation variables (0.25%, 0.5%, and 1% budesonide in methylene chloride) on the morphology and size distribution of the microparticles was determined using scanning electron microscopy. In addition, budesonide-PLA particles were characterized for their surface charge and drug-polymer interactions using a zeta meter and differential scanning calorimetry (DSC), respectively. Furthermore, in vitro budesonide release from budesonide-PLA microparticles was determined at 37°C. Using the PCA process, budesonide and budesonide-PLA microparticles with mean diameters of 1 to 2 μm were prepared. An increase in budesonide concentration (0.25%–1% wt/vol) resulted in budesonide microparticles that were fairly spherical and less aggiomerated. In addition, the size of the microparticles increased with an increase in the drug-polymer solution flow rate (1.4–4.7 mL/min) or with a decrease in the CO2 flow rate (50–10 mL/min). Budesonide-PLA microparticles had a drug loading of 7.94%, equivalent to ∼80% encapsulation efficiency. Budesonide-PLA microparticles had a zeta potential of— 37±4 mV, and DSC studies indicated that SCF processing of budesonide-PLA microparticles resulted in the loss of budesonide crystallinity. Finally, in vitro drug release studies at 37°C indicated 50% budesonide release from the budesonide-PLA microparticles at the end of 28 days. Thus, the PCA process was successful in producing budesonide and budesonide-PLA microparticles. In addition, budesonide-PLA microparticles sustained budesonide release for 4 weeks. 相似文献
7.
Summary We developed a new cell stimulation method in which magnetic microparticles (MPs) were introduced into the cytoplasm of cultured
myoblasts and the cells were cultured in a magnetic field. The differentiation of myoblasts was examined from the viewpoint
of their morphology and myogenin production. After exposure to the magnetic field, the cells containing MPs became larger
and were elongated along the axis of the magnetic poles. Myogenin, a muscle-specific regulatory factor involved in controlling
myogenesis, was formed earlier, and myotubes were seen earlier and more frequently in this group of myoblasts than in the
other groups (cells alone without magnetic field, cells containing MPs but without magnetic field, and cells alone with magnetic
field). Moreover, we succeeded in differentiation of early muscle cells with striated myofibrils in culture at 0.05 T. The
precisely quantitative and stable stimulus induced by a magnetic field developed in the present study offers a new approach
to elucidate the entire process of myoblast differentiation into myotubes. 相似文献
8.
Natasha D. Henry Larry Robinson Elijah Johnson Jennifer Cherrier Michael Abazinge 《Bioremediation Journal》2011,15(2):109-120
The ability of biosurfactants and Acinetobacter calcoaceticus to enhance the emulsification and biodegradation of phenanthrene was investigated. Phenanthrene is a polycyclic aromatic hydrocarbon that may be derived from various sources, for example incomplete combustion of petroleum fuel, and thus it occurs ubiquitously throughout the environment. In order to assess the efficacy of a biosurfactant microparticle system, emulsification assays and in vitro biodegradation studies were conducted. Emulsification assays were carried out to assess the stability of phenanthrene emulsions. Emulsion stability was determined by the height of the emulsion layer (Emulsification Index) and turbidity. In vitro biodegradation tests were done to estimate phenanthrene degradation from an aqueous system by A. calcoaceticus supplemented with encapsulated (ERhBS) and nonencapsulated biosurfactants (NERhBS). Results show that phenanthrene emulsifications were stabilized after 48 h with NERhBS and remained stable for 72 additional hours. Phenanthrene emulsifications were stabilized with ERhBS after 216 h and remained stable for an additional 96 h. A. calcoaceticus alone and supplemented with rhamnolipid biosurfactant were able to biodegrade 10 to 50 mg L?1 of phenanthrene within 250 h. When supplemented with NERhBS, A. calcoaceticus degraded phenanthrene significantly faster than when nonsupplemented or supplemented with ERhBS. Addition of exogenous biosurfactants was considered to be a major factor driving the direct correlation between decreasing phenanthrene concentration in the system and increasing bacterial biomass. 相似文献
9.
Distler JH Huber LC Hueber AJ Reich CF Gay S Distler O Pisetsky DS 《Apoptosis : an international journal on programmed cell death》2005,10(4):731-741
Microparticles are small membrane vesicles released from the cell membrane by exogenous budding. To elucidate the interactions of microparticles with macrophages, the effect of microparticles released from Jurkat T cells on RAW 264.7 cells was determined. Microparticles were isolated by differential centrifugation, using FACS analysis with annexin V and cell surface markers for identification. Various inducers of apoptosis increased the release of microparticles from Jurkat cells up to 5-fold. The released microparticles were then cultured with RAW 264.7 cells. As shown by confocal microscopy and FACS analysis, RAW 264.7 macrophages cleared microparticles by phagocytosis. In addition, microparticles induced apoptosis in RAW 264.7 cells in a dose-dependent manner with up to a 5-fold increase of annexin V positive cells and 9-fold increase in caspase 3 activity. Cell proliferation as determined by the MTT test was also reduced. Furthermore, microparticles stimulated the release of microparticles from macrophages. These effects were specific for macrophages, since no apoptosis was observed in NIH 3T3 and L929 cells. These findings indicate that microparticles can induce macrophages to undergo apoptosis, in turn resulting in a further increase of microparticles. The release of microparticles from apoptotic cells may therefore represent a novel amplification loop of cell death. 相似文献
10.
The objective of this study was to produce microparticles of a new asthma-controlling drug by supercritical assisted atomization
(SAA), proposed as an alternative to conventional jet-milling process. SAA is based on the solubilization of supercritical
carbon dioxide in a liquid solution containing the drug; the ternary mixture is then sprayed through a nozzle, and microparticles
are formed as a consequence of the enhanced atomization. SAA process parameters studied were precipitator temperature, nozzle
diameter, and drug concentration in the liquid solution. Their influence was evaluated on morphology and size of precipitated
particles. Spherical particles with mean particle size ranging from 1 to 3 μm of the new anti-asthma drug were produced by
SAA. The mass median aerodynamic diameter (MMAD) of the SAA micronized particles and of the conventional jet-milled drug was
used to compare, the results obtainable using the 2 techniques. Particularly, MMADs from 1.6 to 4.0 μm were obtained by SAA
at the optimum operating conditions and by varying the concentration of the solution injected. MMAD of 6.0 μm was calculated
for the jet-milled drug. SAA samples also exhibited narrower particle size distribution (PSD). A good control of particle
size and distribution together with no drug degradation was obtained by SAA process.
Published: October 22, 2005 相似文献