Growth and shaping of the fin and limb buds

The development of the fin and limb buds involves a balance of centrifugal (active) and centripetal (passive) mechanical forces, the first of which acts to move the walls of these structures away from each other and the second of which holds them together. When the volume of the mesodermal core increases, the generated force meets with the resistance of the basal membrane, and as a result, the limb bud has a tendency to acquire a cylindrical shape. Collagen fibers, individual mesenchymal cells, and their groups hold together the dorsal and the ventral wall of the limb bud, prevent the movement of these walls away from each other, and in this way direct bud growth along the proximodistal and the anteroposterior axes. The balance of the forces which stretch the ectodermal layer and those which constrain it has also been observed in the development of other body parts.     

Kinetics of the reaction of yolk cell surface in the loach to puncture and mechanic deformation

Circumferential and radial components of the yolk cell surface movements were measured in the loach embryos at the late blastula stage within 40–50 min after puncture or indentation by an obliquely directed glass rod. The yolk cell surface was preliminarily marked by coal particles. It was shown that even closely located regions of the surface differed markedly in the rate and direction of their movements. In the vicinity of puncture, the yolk cell surface at first contracted in both circumferential and radial directions and then widened, but did not reach the initial values. In more remote areas, this surface continued to contract in the circumferential direction, but was extended in the radial direction. The degree of its contraction along different radii was unequal. The reaction to oblique indentation was anisotropic: the closest area of the yolk cell surface, located along the direction of indentation, contracted in both circumferential and radial directions and formed a fold “leaking” onto the rod, while the opposite area contracted in the circumferential direction, but extended in the radial direction. A conclusion was drawn that the yolk cell surface is a multivariant mechanosensitive system. Its active responses to mechanical influences obey the same patterns as multicellular embryonic tissues.     

The critical weed-free period in organically-grown winter wheat

Two experiments were conducted in central southern England between September 1994 and August 1996 to identify the critical weed-free period in organically grown winter wheat (Triticum aestivum, cv. Mercia). In competition with a mixed weed infestation of predominately Alopecurus myosuroides and Tripleurospermum inodorum it was found that wheat yield decreased as the duration of the weed-infested period increased and that the crop needed to be kept free of weeds from sowing in order to completely avoid any yield loss. Also, weeds emerging in the wheat crop (predominately T. inodorum) during the growing season had a significant and detrimental effect on yield. The existence of the critical period, therefore, depends on the imposition of an acceptable yield loss. If a 5% yield loss gives a marginal benefit compared with the cost of weed control, the critical period will begin at 506°C days after sowing (November) and end at 1023°C days after sowing (February). This information could be used by farmers to target mechanical weeding operations to control weeds at a time that will have maximum benefit to the crop.     

Evaluation of four-dimensional cone beam computed tomography ventilation images acquired with two different linear accelerators at various gantry speeds using a deformable lung phantom

We evaluated four-dimensional cone beam computed tomography (4D-CBCT) ventilation images (VI_CBCT) acquired with two different linear accelerator systems at various gantry speeds using a deformable lung phantom.The 4D-CT and 4D-CBCT scans were performed using a computed tomography (CT) scanner, an X-ray volume imaging system (Elekta XVI) mounted in Versa HD, and an On-Board Imager (OBI) system mounted in TrueBeam. Intensity-based deformable image registration (DIR) was performed between peak-exhale and peak-inhale images. VI_CBCT- and 4D-CT-based ventilation images (VI_CT) were derived by DIR using two metrics: one based on the Jacobian determinant and one on changes in the Hounsfield unit (HU). Three different DIR regularization values (λ) were used for VI_CBCT. Correlations between the VI_CBCT and VI_CT values were evaluated using voxel-wise Spearman’s rank correlation coefficient (r).In case of both metrics, the Jacobian-based VI_CBCT with a gantry speed of 0.6 deg/sec in Versa HD showed the highest correlation for all the gantry speeds (e.g., λ = 0.05 and r = 0.68). Thus, the r value of the Jacobian-based VI_CBCT was greater or equal to that of the HU-based VI_CBCT. In addition, the ventilation accuracy of VI_CBCT increased at low gantry speeds.Thus, the image quality of VI_CBCT was affected by the change in gantry speed in both the imaging systems. Additionally, DIR regularization considerably influenced VI_CBCT in both the imaging systems. Our results have the potential to assist in designing CBCT protocols, incorporating VI_CBCT imaging into the functional avoidance planning process.     

Functional lung imaging with synchrotron radiation: Methods and preclinical applications

Many lung disease processes are characterized by structural and functional heterogeneity that is not directly appreciable with traditional physiological measurements. Experimental methods and lung function modeling to study regional lung function are crucial for better understanding of disease mechanisms and for targeting treatment. Synchrotron radiation offers useful properties to this end: coherence, utilized in phase-contrast imaging, and high flux and a wide energy spectrum which allow the selection of very narrow energy bands of radiation, thus allowing imaging at very specific energies. K-edge subtraction imaging (KES) has thus been developed at synchrotrons for both human and small animal imaging. The unique properties of synchrotron radiation extend X-ray computed tomography (CT) capabilities to quantitatively assess lung morphology, and also to map regional lung ventilation, perfusion, inflammation and biomechanical properties, with microscopic spatial resolution. Four-dimensional imaging, allows the investigation of the dynamics of regional lung functional parameters simultaneously with structural deformation of the lung as a function of time. This review summarizes synchrotron radiation imaging methods and overviews examples of its application in the study of disease mechanisms in preclinical animal models, as well as the potential for clinical translation both through the knowledge gained using these techniques and transfer of imaging technology to laboratory X-ray sources.     

Biomechanical rationale of coronary artery bypass grafting of multivessel disease

The biomechanical model of human coronary arteries was modified for improving the quality of diagnosis and surgical treatment for coronary heart disease. The problem of hemodynamics in the left coronary artery with multivessel bed disease – 45% stenosis of the anterior descending branch and 75% stenosis of the circumflex branch – was particularly considered. Numerical simulation of the coronary arterial bypass of the main trunk was carried out to estimate the functional condition of the coronary arteries after restoring myocardial blood supply by surgery.     

The effect of excitation on the rate of respiration in the liverwort Conocephalum conicum

Simultaneous measurements were taken of the electrical activity and the rate of respiration of thalli of Conocephalum conicum L. stimulated electrically and mechanically (by cutting). The measurements of the rate of respiration employed a modified Warburg apparatus for O₂ consumption and an infra-red gas analyzer with computer recording and data processing for CO₂ evolution. The action potential, produced by either a cut (a damaging stimulus) or an electrical stimulus (a non-damaging stimulus), caused a transient rise in the rate of respiration. The course of changes in the rate of respiration depends on the character of the excitation and the area of the thallus covered by it. If stimulation does not produce excitation, the increase in the rate of respiration does not take place, regardless of the magnitude and type of the stimulus applied.     

Penetrometer resistance,root penetration resistance and root elongation rate in two sandy loam soils

Root penetration resistance and elongation of maize seedling roots were measured directly in undisturbed cores of two sandy loam soils. Root elongation rate was negatively correlated with root penetration resistance, and was reduced to about 50 to 60% of that of unimpeded controls by a resistance of between 0.26 and 0.47 MPa. Resistance to a 30° semiangle, 1 mm diameter penetrometer was between about 4.5 and 7.5 times greater than the measured root penetration resistance. However, resistance to a 5° semiangle, 1 mm diameter probe was approximately the same as the resistnace to root penetration after subtracting the frictional component of resistance. The diameter of roots grown in the undisturbed cores was greater than that of roots grown in loose soil, probably as a direct result of the larger mechanical impedance in the cores.     

咽喉部高频喷射通气调节各参数对狗肺通气效率的影响

用相关和回归处理方法,研究了8条正常狗咽喉部高频喷射通气时,调节驱动压、呼吸比和频率对喷气量、吸入气氧浓度、动脉血气及气道内压的作用。结果显示,驱动压和呼吸此对各观察指标几乎有同等重要的作用,频率的影响很小,喷气量与吸入气氧浓度、动脉血气、气道内压间存在显著的正相关关系。说明调节参数的意义主要在于改变了喷气量。     

Mechanical impedance increases aluminium tolerance of soybean (Glycine max) roots

The effect of aluminium (Al) on root elongation was studied in solution culture and sand culture. Compared to solution culture, in sand culture a ten times higher Al supply was necessary to inhibit root elongation to a comparable degree. This was due to a much lower Al uptake into the 5 mm root tips in sand culture. Fe concentrations in root tips were also lower in sand culture. Ca concentrations were higher and less depressed by Al, whereas Mg and K concentrations were not affected by the culture substrate. Regressions of Al concentrations in root tips versus inhibition of root elongation by Al revealed root damage at lower Al concentrations in sand culture. The effect of culture substrate on Al tolerance was independent of N source and could also be shown in flowing solution culture with and without sand. The results indicate that mechanical impedance in sand culture decreased Al uptake. This may be due to enhanced exudation of organic complexors thus reducing activites of monomeric Al species.