Simultaneous tissue profiling of eicosanoid and endocannabinoid lipid families in a rat model of osteoarthritis

We describe a novel LC method for the simultaneous and quantitative profiling of 43 oxylipins including eicosanoids, endocannabinoids, and structurally related bioactive lipids with modified acyl groups. The LC-MS/MS method uses switching at a defined time between negative and positive electrospray ionization modes to achieve optimal detection sensitivity for all the lipids. The validated method is linear over a range of 0.01–5 nmol/g (0.1–50 nmol/g for 2-arachidonoyl glycerol) with intra- and interday precision and accuracy between 1.38 and 26.76% and 85.22 and 114.3%, respectively. The method successfully quantified bioactive lipids in different tissue types in the rat, including spinal cord, dorsal root ganglia (DRGs), knee joint, brain, and plasma. Distinct regional differences in the pattern of lipid measured between tissue types were observed using principle component analysis. The method was applied to analyze tissue samples from an established preclinical rat model of osteoarthritis (OA) pain and showed that levels of 12-hydroxyeicosatetraenoic acid were significantly increased in the OA rat knee joint compared with controls, and that 15-hydroxyeicosatetraenoic acid was significantly increased in the DRGs in the model of OA compared with controls. The developed LC-MS/MS method has the potential to provide detailed pathway profiling in tissues and biofluids where the disruption of bioactive oxylipins may be involved in disease states.     

Does Isolated Unilateral Hip or Knee Osteoarthritis Lead to Adverse Changes in Extremity Composition?

BackgroundWhile muscle atrophy is a function of normal aging, loss of muscle in the setting of hip and knee osteoarthritis (OA) has been observed using radiographic studies. There is limited data available regarding changes in extremity composition using bioimpedance (BIA). The purpose of this study was to assess the changes in extremity composition in patients with isolated, unilateral hip or knee OA using BIA.MethodsPatients presenting to our institution’s adult reconstruction clinic from February 2020 to April 2021 were retrospectively reviewed to identify those with isolated, unilateral hip and knee OA. The InBody 770 Body Composition Analyzer (InBody USA, Cerritos, California) was used to perform a complete body composition assessment, per protocol. Lean extremity mass (LEM), fat mass (FM), intracellular water (ICW), extremity body water (EBW = ICW + extracellular water (ECW)) and phase angle (PA) were determined. Differences between the affected (OA) and unaffected (no OA) extremities were compared using t-tests.Results38 patients had isolated hip OA. The mean age was 60.8 (±11.7) years, mean BMI was 31.7 (±6.8) kg/m2, and 39.5% were female. LEM, FM, EBW, ICW, and PA were significantly decreased in the hip OA extremity (LEM: 20.0 vs. 20.4 kg, p=0.0008, FM: 8.8 vs. 8.9 kg, p=0.0049, EBW: 15.7 vs 16.0, p=0.0011, ICW: 9.5 vs. 9.7 L, p=0.0004, PA: 4.5 vs 4.9º, p<0.0001). There were 25 patients with isolated knee OA. Mean age was 62.8 (±11.3) years, mean BMI was 33.6 (±6.9) kg/m2, and 52.0% were female. FM and PA were significantly lower in the knee OA extremity (11.3 vs 11.4 kg, p=0.0291, 4.5 vs 4.9º, p<0.0001). There were no significant differences in LEM, EBW, and ICW between the knee OA extremity and the unaffected extremity.ConclusionPatients with isolated, unilateral hip OA had decreased LEM, FM, EBW, and ICW in the affected extremity. Both unilateral hip and knee OA was associated with decreased PA, suggestive of greater underlying dysfunction in muscle or cellular performance. Further study is needed to better define when these abnormalities develop, how they progress over time, and the impact of targeted interventions in reversing these changes. Level of Evidence: III     

骨痹消对兔骨关节炎软骨细胞凋亡的影响

目的探讨中药早期治疗对兔实验性膝关节骨性关节炎(KOA)软骨细胞凋亡的影响。方法参照Okazaki等[1]伸膝制动OA动物模型法造模,随机分为正常组(A组)、模型组(B组)、骨痹消组(C组),于治疗6周、10周后测各组兔血清NO水平变化;软骨电镜结构及TUNEL法软骨细胞凋亡指数(AI)。结果 B组血清NO水平逐渐升高,C组有不同程度的降低;B组电镜下6周时可见凋亡细胞,10周可见凋亡小体;TUNEL法细胞凋亡原位检测:B组软骨细胞AI明显增高。治疗后C组下降明显,10周时与B组相比具极显著差异(P0.01)。结论骨痹消在一定程度上阻断软骨细胞凋亡,减少细胞凋亡数量,促进软骨的修复。     

Intra-articular implantation of autologous bone marrow–derived mesenchymal stromal cells to treat knee osteoarthritis: a randomized,triple-blind,placebo-controlled phase 1/2 clinical trial

Background

The intra-articular implantation of mesenchymal stromal cells (MSCs) as a treatment for knee osteoarthritis (OA) is an emerging new therapy. In this study, patients with knee OA received intra-articular implantations of autologous bone marrow–derived MSCs. We sought to assess the safety and efficacy of this implantation.

Effects of branched-chain amino acid supplement on knee peak torque and indicators of muscle damage following isokinetic exercise-induced delayed onset muscle soreness

[Purpose] This study aimed to investigate the effects of branched-chain amino acid (BCAA) supplement on delayed onset muscle soreness (DOMS) by analyzing the maximum muscle strength and indicators of muscle damage.[Methods] Twelve men with majors in physical education were assigned to the BCAA group and placebo group in a double-blinded design, and repeated measurements were conducted. DOMS was induced with an isokinetic exercise. Following BCAA administration, the changes in the knee extension peak torque, flexion peak torque, aspartate aminotransferase (AST), creatine kinase (CK), and lactate dehydrogenase (LDH) concentrations were analyzed. The maximum knee muscle strength was measured at the baseline (pre-D0) following BCAA administration for 5 days before exercise (-D5, -4D, -3D, -2D, -1D). In contrast, the post-treatment measurements (D3) were recorded after BCAA administration for 3 days (post-D0, D1, D2). Blood samples were obtained before (pre-D0), immediately after (post-D0), 24 h (D1), 48 h (D2), and 72 h (D3) after the exercise to analyze the indicators of muscle strength. BCAA was administered twice daily for 8 days (5 days and 3 days before inducing DOMS and during the experimental period, respectively).[Results] There was no difference in the flexion peak torque between the groups. However, the BCAA group showed a significantly higher extension peak torque at D3 (second isokinetic exercise), compared to the placebo group (p<.05). There was no difference in AST changes between the groups. Nonetheless, the CK and LDH were significantly reduced in the BCAA group, compared to the placebo group. There was no correlation between the extension peak torque and flexion peak torque. However, the CK and LDH increased proportionately in DOMS. Moreover, their concentrations significantly increased with a decreasing peak torque (p<.01).[Conclusion] An exercise-induced DOMS results in a decrease in the peak torque and a proportional increase in the CK and LDH concentrations. Moreover, the administration of BCAA inhibits the reduction of the extension peak torque and elevation of CK and LDH concentrations. Therefore, BCAA might be administered as a supplement to maintain the muscle strength and prevent muscle damage during vigorous exercises that may induce DOMS in sports settings.     

Time-dependent elastohydrodynamic lubrication analysis of total knee replacement under walking conditions

This work is concerned with the lubrication analysis of artificial knee joints, which plays an increasing significant role in clinical performance and longevity of components. Time-dependent elastohydrodynamic lubrication analysis for normal total knee replacement is carried out under the cyclic variation in both load and speed representative of normal walking. An equivalent ellipsoid-on-plane model is adopted to represent an actual artificial knee. A full numerical method is developed to simultaneously solve the Reynolds and elasticity equations using the multigrid technique. The elastic deformation is based on the constrained column model. Results show that, under the combined effect of entraining and squeeze-film actions throughout the walking cycle, the predicted central film thickness tends to decrease in the stance phase but keeps a relatively larger value at the swing phase. Furthermore, the geometry of knee joint implant is verified to play an important role under its lubrication condition, and the length of time period is a key point to influence the lubrication performance of joint components.     

Introducing a new staircase design to quantify healthy knee function during stair ascent and descent

The design, manufacture and validation of a new free standing staircase for motion analysis measurements are described in this paper. The errors in vertical force measurements introduced when the stairs interface with a force plate (FP) are less than 0.6%. The centre of pressure error introduced is less than 0.7 mm compared to the error from the FP. The challenges of introducing stair gait into a clinical trial with a limited number of FPs and time limitations for assessment sessions are addressed by introducing this cost effective solution.

The staircase was used in a study to measure non-pathological knee function of 10 subjects performing stair ascent and descent. The resulting knee kinematics and knee joint moments are in agreement with previous studies. The kinematic and joint moment profiles provide a normative range, which will be useful in future studies for identifying alterations in joint function associated with pathology and intervention.     

An automatic 2D–3D image matching method for reproducing spatial knee joint positions using single or dual fluoroscopic images

Fluoroscopic image technique, using either a single image or dual images, has been widely applied to measure in vivo human knee joint kinematics. However, few studies have compared the advantages of using single and dual fluoroscopic images. Furthermore, due to the size limitation of the image intensifiers, it is possible that only a portion of the knee joint could be captured by the fluoroscopy during dynamic knee joint motion. In this paper, we presented a systematic evaluation of an automatic 2D–3D image matching method in reproducing spatial knee joint positions using either single or dual fluoroscopic image techniques. The data indicated that for the femur and tibia, their spatial positions could be determined with an accuracy and precision less than 0.2 mm in translation and less than 0.4° in orientation when dual fluoroscopic images were used. Using single fluoroscopic images, the method could produce satisfactory accuracy in joint positions in the imaging plane (in average up to 0.5 mm in translation and 1.3° in rotation), but large variations along the out-plane direction (in average up to 4.0 mm in translation and 2.2° in rotation). The precision of using single fluoroscopic images to determine the actual knee positions was worse than its accuracy obtained. The data also indicated that when using dual fluoroscopic image technique, if the knee joint outlines in one image were incomplete by 80%, the algorithm could still reproduce the joint positions with high precisions.     

Biomechanical evaluation of porous biodegradable scaffolds for revision knee arthroplasty

Tibial bone defect is a critical problem for revision knee arthroplasty. Instead of using metallic spacer or cement, biodegradable scaffolds could be an alternative solution. A numerical model of a revision knee arthroplasty was thus developed to estimate the mechanical resistance of the scaffold in this demanding situation. The tibia, scaffold, and prosthesis were represented by simplified parameterised geometries. The maximal gait cycle force was applied asymmetrically to simulate a critical loading. Several parameters were analysed: 1) inter-individual variability, 2) cortical bone stiffness, 3) cortical bone thickness, 4) prosthesis fixation quality, and 5) scaffold thickness. The calculated scaffold strain was compared to its experimental ultimate strain. Among the tested parameters, failure was only predicted with scaffold thickness below 5 mm. This study suggests that biodegradable bone scaffolds could be used to fill bone defects in revision knee arthroplasty, but scaffold size seems to be the limiting factor.     

Treatment of Osteochondral Defects in the Rabbit's Knee Joint by Implantation of Allogeneic Mesenchymal Stem Cells in Fibrin Clots

The treatment of osteochondral articular defects has been challenging physicians for many years. The better understanding of interactions of articular cartilage and subchondral bone in recent years led to increased attention to restoration of the entire osteochondral unit. In comparison to chondral lesions the regeneration of osteochondral defects is much more complex and a far greater surgical and therapeutic challenge. The damaged tissue does not only include the superficial cartilage layer but also the subchondral bone. For deep, osteochondral damage, as it occurs for example with osteochondrosis dissecans, the full thickness of the defect needs to be replaced to restore the joint surface ¹. Eligible therapeutic procedures have to consider these two different tissues with their different intrinsic healing potential ². In the last decades, several surgical treatment options have emerged and have already been clinically established ^3-6.Autologous or allogeneic osteochondral transplants consist of articular cartilage and subchondral bone and allow the replacement of the entire osteochondral unit. The defects are filled with cylindrical osteochondral grafts that aim to provide a congruent hyaline cartilage covered surface ^3,7,8. Disadvantages are the limited amount of available grafts, donor site morbidity (for autologous transplants) and the incongruence of the surface; thereby the application of this method is especially limited for large defects.New approaches in the field of tissue engineering opened up promising possibilities for regenerative osteochondral therapy. The implantation of autologous chondrocytes marked the first cell based biological approach for the treatment of full-thickness cartilage lesions and is now worldwide established with good clinical results even 10 to 20 years after implantation ^9,10. However, to date, this technique is not suitable for the treatment of all types of lesions such as deep defects involving the subchondral bone ¹¹.The sandwich-technique combines bone grafting with current approaches in Tissue Engineering ^5,6. This combination seems to be able to overcome the limitations seen in osteochondral grafts alone. After autologous bone grafting to the subchondral defect area, a membrane seeded with autologous chondrocytes is sutured above and facilitates to match the topology of the graft with the injured site. Of course, the previous bone reconstruction needs additional surgical time and often even an additional surgery. Moreover, to date, long-term data is missing ¹².Tissue Engineering without additional bone grafting aims to restore the complex structure and properties of native articular cartilage by chondrogenic and osteogenic potential of the transplanted cells. However, again, it is usually only the cartilage tissue that is more or less regenerated. Additional osteochondral damage needs a specific further treatment. In order to achieve a regeneration of the multilayered structure of osteochondral defects, three-dimensional tissue engineered products seeded with autologous/allogeneic cells might provide a good regeneration capacity ¹¹.Beside autologous chondrocytes, mesenchymal stem cells (MSC) seem to be an attractive alternative for the development of a full-thickness cartilage tissue. In numerous preclinical in vitro and in vivo studies, mesenchymal stem cells have displayed excellent tissue regeneration potential ^13,14. The important advantage of mesenchymal stem cells especially for the treatment of osteochondral defects is that they have the capacity to differentiate in osteocytes as well as chondrocytes. Therefore, they potentially allow a multilayered regeneration of the defect.In recent years, several scaffolds with osteochondral regenerative potential have therefore been developed and evaluated with promising preliminary results ^1,15-18. Furthermore, fibrin glue as a cell carrier became one of the preferred techniques in experimental cartilage repair and has already successfully been used in several animal studies ^19-21 and even first human trials ²².The following protocol will demonstrate an experimental technique for isolating mesenchymal stem cells from a rabbit''s bone marrow, for subsequent proliferation in cell culture and for preparing a standardized in vitro-model for fibrin-cell-clots. Finally, a technique for the implantation of pre-established fibrin-cell-clots into artificial osteochondral defects of the rabbit''s knee joint will be described.