Studies of the relationship between isoprene emission rate and CO2 or photon-flux density using a real-time isoprene analyser

Abstract. Studies of the isoprene emission rate in response to changes in photon-flux density and CO₂ partial pressure were conducted using a recently developed on-line isoprene analyser combined with a gas exchange system and chlorophyll fluorometer. Upon darkening, the isoprene emission rate from leaves of aspen ( Populus tremuloides Michaux.) began to decline immediately, demonstrating that the internal pool of isoprene, or its precursors, is small and that the instantaneous emission rate is tightly coupled to the rate of synthesis. A post-illumination burst of isoprene was observed within 5 min after darkening and lasted for 15–20 min in four isoprene-emitting species that were examined. In leaves of eucalyptus ( Eucalyptus globulus Labill.), the magnitude of the post-illumination burst was dependent on the photon-flux density that existed before darkening, but not on ambient CO₂ partial pressure. The dependence of the post-illumination burst on photon-flux density paralleled that for the steady-state rate of isoprene emission. A step-wise increase in intercellular CO₂ partial pressure from 24.5 to 60 Pa resulted in an immediate decrease in isoprene emission rate and non-photochemical fluorescence quenching, but an increase in CO₂ assimilation rate. Given the several recent studies that link isoprene emission to chloroplastic processes, the results of this study indicate that the linkage is not dependent on the rate of CO₂ flux through the reductive pentose phosphate pathway, but rather on more complex relationships involving metabolites not appreciably influenced by CO₂ partial pressure.     

The response of isoprene emission rate and photosynthetic rate to photon flux and nitrogen supply in aspen and white oak trees

Isoprene is the primary biogenic hydrocarbon emitted from temperate deciduous forest ecosystems. The effects of varying photon flux density (PFD) and nitrogen growth regimes on rates of isoprene emission and net photosynthesis in potted aspen and white oak trees are reported. In both aspen and oak trees, whether rates were expressed on a leaf area or dry mass basis, (1) growth at higher PFD resulted in significantly higher rates of isoprene emission, than growth at lower PFD, (2) there is a significant positive relationship between isoprene emission rate and leaf nitrogen concentration in both sun and shade trees, and (3) there is a significant positive correlation between isoprene emission rate and photosynthetic rate in both sun and shade trees. The greater capacity for isoprene emission in sun leaves was due to both higher leaf mass per unit area and differences in the biochemical and/or physiological properties that influence isoprene emission. Positive correlations between isoprene emission rate and leaf nitrogen concentration support the existence of mechanisms that link leaf nitrogen status to isoprene synthase activity. Positive correlations between isoprene emission rate and photosynthesis rate support previous hypotheses that isoprene emission plays a role in protecting photosynthetic mechanisms during stress.     

Water stress,temperature, and light effects on the capacity for isoprene emission and photosynthesis of kudzu leaves

Kudzu (Pueraria lobata (Willd) Ohwi.) is a vine which forms large, monospecific stands in disturbed areas of the southeastern United States. Kudzu also emits isoprene, a hydrocarbon which can significantly affect atmospheric chemistry including reactions leading to tropospheric ozone. We have studied physiological aspects of isoprene emission from kudzu so the ecological consequences of isoprene emission can be better understood. We examined: (a) the development of isoprene emission as leaves developed, (b) the interaction between photon flux density and temperature effects on isoprene emission, (c) isoprene emission during and after water stress, and (d) the induction of isoprene emission from leaves grown at low temperature by water stress or elevated temperature. Isoprene emission under standard conditions of 1000 mol photons·m^-2·s^-1 and 30°C developed only after the leaf had reached full expansion, and was not complete until up to two weeks past the point of full expansion of the leaf. The effect of temperature on isoprene emission was much greater than found for other species, with a 10°C increase in temperature causing a eight-fold increase in the rate of isoprene emission. Isoprene emission from kudzu was stimulated by increases in photon flux density up to 3000 mol photons·m^-2·s^-1. In contrast, photosynthesis of kudzu was saturated at less than 1000 mol·m^-2·s^-1 photon flux density and was reduced at high temperature, so that up to 20% of the carbon fixed in photosynthesis was reemitted as isoprene gas at 1000 mol photons·m^-2·s^-1 and 35°C. Withholding water caused photosynthesis to decline nearly to zero after several days but had a much smaller effect on isoprene emission. Following the relief of water stress, photosynthesis recovered to the prestress level but isoprene emission increased to about five times the prestress rate. At 1000 mol photons·m^-2·s^-1 and 35°C as much as 67% of the carbon fixed in photosynthesis was reemitted as isoprene eight days after water stress. Leaves grown at less than 20°C did not make isoprene until an inductive treatment was given. Inductive treatments included growth at 24°C, leaf temperature of 30°C for 5 h, or witholding water from plants. With the new information on temperature and water stress effects on isoprene emission, we speculate that isoprene emission may help plants cope with stressful conditions.     

1D Stretchable Block Copolymer Yarn‐Based Energy Harvesters via BaTiO3/Polydimethylsiloxane Composite‐Carbon Conductive Ink

Highly stretchable self‐powered energy sources are promising options for powering diverse wearable smart electronics. However, commercially existing energy sources are disadvantaged by tensile strain limitations and constrained deformability. Here, 1D thread‐based highly stretchable triboelectric nanogenerators (HS‐TENGs), a crucial step toward overcoming these obstacles, are developed based on a highly stretchable coaxial‐type poly[styrene‐b‐isoprene‐b‐styrene] (SIS) elastomer tube. Carbon conductive ink is injected into the SIS tube as a core 1D electrode that remains almost unaffected even under 250% stretching because of its low Young's modulus. To further facilitate power generation by the HS‐TENG, a composite of barium titanate nanoparticles (BaTiO₃ NPs) and polydimethylsiloxane (PDMS) is coated on the initial SIS tube to modulate the dielectric permittivity based on variations in the BaTiO₃ NPs volume ratio. The 1D PDMS/BaTiO₃ NP composite‐coated SIS and a nylon 6‐coated 2D Ni–Cu conductive fabric are selected as triboelectric bottom and top layers, respectively. Woven HS‐TENGs textiles yield consistent power output under various extreme and harsh conditions, including folded, twisted, and washed states. These experimental findings indicate that the approach may become useful for realizing stretchable multifunctional power sources for various wearable electronics.     

A unifying conceptual model for the environmental responses of isoprene emissions from plants

Background and Aims

Isoprene is the most important volatile organic compound emitted by land plants in terms of abundance and environmental effects. Controls on isoprene emission rates include light, temperature, water supply and CO₂ concentration. A need to quantify these controls has long been recognized. There are already models that give realistic results, but they are complex, highly empirical and require separate responses to different drivers. This study sets out to find a simpler, unifying principle.

Methods

A simple model is presented based on the idea of balancing demands for reducing power (derived from photosynthetic electron transport) in primary metabolism versus the secondary pathway that leads to the synthesis of isoprene. This model''s ability to account for key features in a variety of experimental data sets is assessed.

Key results

The model simultaneously predicts the fundamental responses observed in short-term experiments, namely: (1) the decoupling between carbon assimilation and isoprene emission; (2) a continued increase in isoprene emission with photosynthetically active radiation (PAR) at high PAR, after carbon assimilation has saturated; (3) a maximum of isoprene emission at low internal CO₂ concentration (c_i) and an asymptotic decline thereafter with increasing c_i; (4) maintenance of high isoprene emissions when carbon assimilation is restricted by drought; and (5) a temperature optimum higher than that of photosynthesis, but lower than that of isoprene synthase activity.

Conclusions

A simple model was used to test the hypothesis that reducing power available to the synthesis pathway for isoprene varies according to the extent to which the needs of carbon assimilation are satisfied. Despite its simplicity the model explains much in terms of the observed response of isoprene to external drivers as well as the observed decoupling between carbon assimilation and isoprene emission. The concept has the potential to improve global-scale modelling of vegetation isoprene emission.     

Effects of heat and drought stress on post‐illumination bursts of volatile organic compounds in isoprene‐emitting and non‐emitting poplar

Over the last decades, post‐illumination bursts (PIBs) of isoprene, acetaldehyde and green leaf volatiles (GLVs) following rapid light‐to‐dark transitions have been reported for a variety of different plant species. However, the mechanisms triggering their release still remain unclear. Here we measured PIBs of isoprene‐emitting (IE) and isoprene non‐emitting (NE) grey poplar plants grown under different climate scenarios (ambient control and three scenarios with elevated CO₂ concentrations: elevated control, periodic heat and temperature stress, chronic heat and temperature stress, followed by recovery periods). PIBs of isoprene were unaffected by elevated CO₂ and heat and drought stress in IE, while they were absent in NE plants. On the other hand, PIBs of acetaldehyde and also GLVs were strongly reduced in stress‐affected plants of all genotypes. After recovery from stress, distinct differences in PIB emissions in both genotypes confirmed different precursor pools for acetaldehyde and GLV emissions. Changes in PIBs of GLVs, almost absent in stressed plants and enhanced after recovery, could be mainly attributed to changes in lipoxygenase activity. Our results indicate that acetaldehyde PIBs, which recovered only partly, derive from a new mechanism in which acetaldehyde is produced from methylerythritol phosphate pathway intermediates, driven by deoxyxylulose phosphate synthase activity.