Peroxidases from marine microalgae

Peroxidase activity was detected in cell-free extractsof strains of three species of the marine microalgae,Porphyridium purpureum, Phaeodactylumtricornutum and Dunaliella tertiolecta. However, no bromo- or chloroperoxidase activity wasdetected in any, using the standard 2-chlorodimedoneassay. Only the extract from P. purpureumoxidized iodide and this peroxidase was partiallypurified via anion-exchange chromatography. KI ando-dianisidine assay of the fractions indicatedthat only one peroxidase was present. Characterization of the thermally labile enzymesuggested that it is a heme-containing peroxidase,with a molecular weight of approximately 36,000.     

Random mutagenesis and selection of organic solvent‐stable haloperoxidase from Streptomyces aureofaciens

Haloperoxidases are useful oxygenases involved in halogenation of a range of water‐insoluble organic compounds and can be used without additional high‐cost cofactors. In particular, organic solvent‐stable haloperoxidases are desirable for enzymatic halogenations in the presence of organic solvents. In this study, we adopted a directed evolution approach by error‐prone polymerase chain reaction to improve the organic solvent‐stability of the homodimeric BPO‐A1 haloperoxidase from Streptomyces aureofaciens. Among 1,000 mutant BPO‐A1 haloperoxidases, an organic solvent‐stable mutant OST48 with P123L and P241A mutations and a high active mutant OST959 with H53Y and G162R mutations were selected. The residual activity of mutant OST48 after incubation in 40% (v/v) 1‐propanol for 1 h was 1.8‐fold higher than that of wild‐type BPO‐A1. In addition, the OST48 mutant showed higher stability in methanol, ethanol, dimethyl sulfoxide, and N,N‐dimethylformamide than wild‐type BPO‐A1 haloperoxidase. Moreover, after incubation at 80°C for 1 h, the residual activity of mutant OST959 was 4.6‐fold higher than that of wild‐type BPO‐A1. Based on the evaluation of single amino acid‐substituted mutant models, stabilization of the hydrophobic core derived from P123L mutation and increased numbers of hydrogen bonds derived from G162R mutation led to higher organic solvent‐stability and thermostability, respectively. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:917–924, 2015     

Effect of environmental and physiological factors on the antibacterial activity of Curvularia haloperoxidase system against Escherichia coli

AIMS: The aim of this study was to investigate the influence of environmental and physiological factors on the susceptibility of Escherichia coli to the Curvularia haloperoxidase system. METHODS AND RESULTS: The Curvularia haloperoxidase system is a novel enzyme system that produces reactive oxygen species which have an antimicrobial effect. Escherichia coli MG1655 was exposed to the Curvularia haloperoxidase system under different temperatures and NaCl concentrations and after exposure to different stress factors. Temperature clearly affected enzymatic activity with increasing antibacterial effect at increasing temperature. The presence of NaCl interfered with the enzyme system and in the presence of 1% NaCl, no antibacterial effect could be observed at pH 7. Cells grown at pH 8.0 were in one experiment more resistant than cells grown at pH 6.5, whereas cells grown in the presence of 2% NaCl were more susceptible to the Curvularia haloperoxidase system. CONCLUSIONS: Environmental and physiological factors can affect the antibacterial activity of the Curvularia haloperoxidase system. SIGNIFICANCE AND IMPACT OF THE STUDY: The study demonstrates a systematic approach in assessing the effect of environmental and physiological factors on microbial susceptibility to biocides. Such information is crucial for prediction of application as well as potential side-effects.     

Iodine transfers in the coastal marine environment: the key role of brown algae and of their vanadium-dependent haloperoxidases

Brown algal kelp species are the most efficient iodine accumulators among all living systems, with an average content of 1.0% of dry weight in Laminaria digitata, representing a ca. 30,000-fold accumulation of this element from seawater. Like other marine macroalgae, kelps are known to emit volatile short-lived organo-iodines, and molecular iodine which are believed to be a main vector of the iodine biogeochemical cycle as well as having a significant impact on atmospheric chemistry. Therefore, radioactive iodine can potentially accumulate in seaweeds and can participate in the biogeochemical cycling of iodine, thereby impacting human health. From a radioecological viewpoint, iodine-129 (129I, half-life of 1.6 x 10(7) years) is one of the most persistent radionuclide released from nuclear facilities into the environment. In this context, the speciation of iodine by seaweeds is of special importance and there is a need to further understand the mechanisms of iodine uptake and emission by kelps. Recent results on the physiological role and biochemistry of the vanadium haloperoxidases of brown algae emphasize the importance of these enzymes in the control of these processes.     

Reduced‐oxidized difference spectral analysis and chemiluminescence‐based Scatchard analysis demonstrate selective binding of myeloperoxidase to microbes

Myeloperoxidase (MPO), a microbicidal haloperoxidase of neutrophil leukocytes, was observed to selectively bind to bacteria. Binding was quantified by dithionite‐reduced minus oxidized (R? O) difference spectral analysis. Escherichia coli and Pseudomonas aeruginosa showed large MPO binding by R? O difference spectral analysis, whereas Streptococcus sanguinis did not. For increased sensitivity, free and microbe‐bound MPO and chloroperoxidase (CPO) activities were quantified by acid‐optimum haloperoxidase‐dependent chemiluminescence (CL) measurements, and these data were used for Scatchard analysis. The MPO bound/free (B/F) CL ratio was 49.5 for P. aeruginosa, 14.6 for Staphylococcus aureus, 2.8 for E. coli, 0.7 for Candida albicans and 0.4 for S. sanguinis. By comparison, the CPO B/F CL ratio was 0.03 for P. aeruginosa, 0.09 for S. aureus, 0.31 for E. coli, 0.18 for C. albicans and 0.16 for S. sanguinis. As a member of the lactic acid family of bacteria and a viridans streptococcus, S. sanguinis does not synthesize cytochromes and is catalase‐negative. The metabolic products of S. sanguinis, i.e. lactic acid and hydrogen peroxide, provide optimal acidity and substrate for MPO oxidation of chloride to hypochlorite. Hypochlorite can react with organic substrates to yield dehydrogenated or chlorinated products, but when peroxide is not limiting, hypochlorite reacts with peroxide yielding singlet oxygen. The reactivity of hypochlorite is dependent on substrate availability. The microsecond half‐life of electronically excited singlet oxygen restricts reactivity to within a radius of <0.25 µm; i.e. the reactivity of singlet oxygen is both substrate and half‐life dependent. Poor MPO binding provides protection and possibly competitive advantage to viridans streptococci. Copyright © 2010 John Wiley & Sons, Ltd.     

Modification of halogen specificity of a vanadium-dependent bromoperoxidase

The halide specificity of vanadium-dependent bromoperoxidase (BPO) from the marine algae, Corallina pilulifera, has been changed by a single amino acid substitution. The residue R397 has been substituted by the other 19 amino acids. The mutant enzymes R397W and R397F showed significant chloroperoxidase (CPO) activity as well as BPO activity. These mutant enzymes were purified and their properties were investigated. The maximal velocities of CPO activities of the R397W and R397F enzymes were 31.2 and 39.2 units/mg, and the K(m) values for Cl(-) were 780 mM and 670 mM, respectively. Unlike the native enzyme, both mutant enzymes were inhibited by NaN(3). In the case of the R397W enzyme, the incorporation rate of vanadate into the active site was low, compared with the R397F and the wild-type enzyme. These results supported the existence of a specific halogen binding site within the catalytic cleft of vanadium haloperoxidases.     

The thiocarbamate-inducible Rhodococcus enzyme ThcF as a member of the family of alpha/beta hydrolases with haloperoxidative side activity

Purified thiocarbamate-inducible ThcF of Rhodococcus erythropolis NI86/21, overexpressed in Escherichia coli, displayed several characteristics of the HASH family of enzymes that groups prokaryotic proteins of the alpha/beta hydrolase superfamily possessing serine-dependent hydrolase and/or haloperoxidase activity. Kinetic analysis of bromination and ester hydrolysis revealed a low affinity of ThcF for model substrates. Sulfoxidation of thiocarbamates was demonstrated but probably represents a side activity due to peroxoacid generation by the enzyme. The thcF-linked thcG gene, encoding a LAL-type regulator, triggers expression of thcF in Rhodococcus. The tandem gene organization thcG-thcF is conserved in the thiocarbamate-degrading strain Rhodococcus sp. B30. It is proposed that HASH enzymes may be involved in the metabolism of plant-derived compounds.     

Biocatalytic formation of synthetic melanin: the role of vanadium haloperoxidases, L-DOPA and iodide

The vanadium haloperoxidase (V-HPO) enzyme, extracted from the brown alga Laminaria saccharina, is able to catalyze the formation of a black precipitate, using as precursor the amino acid l-dopa in the presence of hydrogen peroxide and iodide, in one-pot synthesis. The l-dopa oxidation is a multistep reaction with a crucial role played by the iodide in the enzyme catalyzed peroxidative production of dopachrome, a well known intermediate in the synthesis of melanin. Dopachrome is then converted to a synthetic form of melanin through a polymerization reaction. Factors, such as buffer composition and pH, influence significantly the reaction first steps, but further steps of melanin production are hardly influenced. The biosynthetic melanin produced through the combination V-HPO/I/H₂O₂, was characterized by several spectroscopic techniques (UV-vis and FT-IR) as well as XRD. Moreover, this biopolymer is light sensitive, decomposing into oligo- and monomeric units. Scanning electron microscopy (SEM) imaging showed different morphologies when compared with commercial available melanin. The biosynthetic production of melanin can have a wide range of applications from photosensitive cells to biomedicine with the advantage of being produced under eco-friendly and mild conditions.