Dual mechanism of laminin modulation of ecto-5′-nucleotidase activity

The myoblast cell surface activity of ecto-5′-nucleotidase was stimulated by a laminin substrate, whereas fibronectin and gelatin did not increase the AMPase activity of ecto-5′-nucleotidase. This increase was related to a higher expression of ecto-5′-nucleotidase on the surface of cells seeded on a laminin substrate, but without the mobilization of an intracellular pool of enzyme. Furthermore, laminin and its fragments E′₁ and E₈ modified the AMPase activity of the ecto-5′-nucleotidase purified from chicken striated muscle and reconstituted in liposomes. Over the range of concentrations used, intact laminin and its fragment E₈, consisting of the distal half of the long arm, stimulated the AMPase activity of ecto-5′-nucleotidase. By contrast, the large fragment derived from the short arms, designated E′₁, inhibited the AMPase activity. Furthermore, the monoclonal anti-ecto-5′-nucleotidase antibody, CG37, abolished the stimulatory effect of fragment E₈ on the AMPase activity of ecto-5′-nucleotidase but did not reverse the inhibitory effect of fragment E′₁. In conclusion, laminin stimulates the AMPase activity of ecto-5′-nucleotidase by two mechanisms: inducing the expression of ecto-5′-nucleotidase to the cell surface and direct modulation of the enzymatic activity.     

阿胶,新阿胶,黄明胶,马皮胶,杂皮胶的质量对比研究：Ⅰ.氨基酸分析

本文用835-50型氨基酸自动分析仪测定了阿胶、新阿胶、黄明胶、马皮胶和杂皮胶中游离氨基酸和总氨基酸的含量,并计算出游离氨基酸、总氨基酸按侧链基团分类和按医药用途分类的相对含量。结果表明,各种氨基酸含量一般以驴皮胶为较高,但与其他几种胶比较并无显著差异,似可以猪皮马皮、牛皮代替驴皮。这也说明,单从氨基酸的含量来鉴别胶的种类和质量似乎不可行。     

Growth of human muscle in tissue culture

Summary A method is described for the culture of normal and diseased human muscle cells. Cell outgrowth was obtained from 63/63 biopsies, and cells differentiated to form myotubes in 57/63 biopsies. The culture technique used readily permitted the growth of both normal and diseased human muscle cells. This work was supported by grants from the Muscular Dystrophy Group of Great Britain and the Medical Research Council.     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

Cryo‐Immunoelectron Microscopy of Adherent Cells Improved by the Use of Electrospun Cell Culture Substrates

Electrospun nanofibres are an excellent cell culture substrate, enabling the fast and non‐disruptive harvest and transfer of adherent cells for microscopical and biochemical analyses. Metabolic activity and cellular structures are maintained during the only half a minute‐long harvest and transfer process. We show here that such samples can be optimally processed by means of cryofixation combined either with freeze‐substitution, sample rehydration and cryosection‐immunolabelling or with freeze‐fracture replica‐immunolabelling. Moreover, electrospun fibre substrates are equally suitable for complementary approaches, such as biochemistry, fluorescence microscopy and cytochemistry.     

Injectable and moldable hydrogels for use in sensitive and wide range strain sensing applications

Recently, the use of hybrid double network (DN) hydrogels has become prominent due to their enhanced mechanical properties, which has opened the door for new applications of these soft materials. Only a few of these gels have demonstrated both injectable and moldable capabilities. In this work, we report the mechanical properties, gauge factor (GF) values and demonstrate both the injectability and moldability of a gelatin/polyacrylamide DN hydrogel. We optimized several parameters, such as, gelatin to polyacrylamide ratio, reactant concentrations and metal ion concentration, to produce a gelatin/polyacrylamide hydrogel with superior mechanical properties. The highest water content gel was capable of withstanding strains of 5000% before failure. These gels were facilely injected into molds where they effectively changed shape and maintained similar properties prior to remolding. When 20 mM calcium was doped into a similar gel, a tensile strength of 1.71 MPa was achieved. Aside from improving the mechanical properties of the gels, both Ca²⁺ and Mg²⁺ also improved their conductivity, so they were tested for use as strain sensors. The sensitivity of the hydrogel strain sensors were measured using the GF. For the 20 mM Ca²⁺ hydrogel, these GF values ranged from 1.63 to 6.85 for strains of 100% to 2100% respectively. Additionally, the sensors showed good stability over continuous cyclic stretching, demonstrating their long term reliability for strain sensing.     

Alveolar mimics with periodic strain and its effect on the cell layer formation

We report on the development of a new model of alveolar air–tissue interface on a chip. The model consists of an array of suspended hexagonal monolayers of gelatin nanofibers supported by microframes and a microfluidic device for the patch integration. The suspended monolayers are deformed to a central displacement of 40–80 µm at the air–liquid interface by application of air pressure in the range of 200–1,000 Pa. With respect to the diameter of the monolayers, that is, 500 µm, this displacement corresponds to a linear strain of 2–10% in agreement with the physiological strain range in the lung alveoli. The culture of A549 cells on the monolayers for an incubation time of 1–3 days showed viability in the model. We exerted a periodic strain of 5% at a frequency of 0.2 Hz for 1 hr to the cells. We found that the cells were strongly coupled to the nanofibers, but the strain reduced the coupling and induced remodeling of the actin cytoskeleton, which led to a better tissue formation. Our model can serve as a versatile tool in lung investigations such as in inhalation toxicology and therapy.